业务流程能够模型化并且可以对其工作进行模仿以提高业务理解和优化业务工作流的设计。
Business processes can be modeled and their behavior simulated to improve business understanding and to optimize business workflow design.
其计算结果将为渐开线齿轮设计、参数优化选择等提供参考数据，同时为齿根应力数值分析提供了新的数学模型。
The result will offer reference data for design of involute gear and optimization of parameter choice, and offer new mathematical model for numerical analysis of root stress.
对优化后的模型进行了安全校核，验证其完全满足设计要求。
The safety checking validate that the optimized model satisfies the design requirements.
其优化模型包含两类设计变量：几何位置变量和几何尺寸变量。
The optimization model contains two kinds of designing variables: geometric position variable and geometric dimension variable.
通过大源渡枢纽通航建筑物的整体模型试验，为其优化布置和通航条件设计提供了依据。
The overall model test of Dayuandu Junction navigation structures provided a basis for the optimized arrangement and navigation condition design.
由于本文的研究对象为桁架结构，因此建立了其优化设计的简单生命周期模型。
As the paper's research object is truss structure, a simple life cycle optimization model for it is established.
提出了多工位级进模工步设计的多目标最优化组合的数学模型、通用算法以及建立其CAD系统的实现方法。
The mathematics model of multiobjective optimum combination, good algorithms and CAD system for strip layout of multistep progressive die are given in this paper.
对导管螺旋桨进行优化设计的分析与探讨，建立优化数学模型，通过实例说明其可行性。
It's analyzed and inquired into optimality design of duck propeller. Mathematical models are set up. It shows it's practicable through example.
通过应用模糊设计理论和可靠性设计理论，建立了摩擦力作用下直齿圆柱齿轮传动的模糊可靠性优化设计的数学模型，并对其进行优化处理。
In this paper, the fuzzy reliable optimum design's mathematical model of the spur gear under the action of the sliding friction is set up by using the fuzzy and reliable theory.
论述了其数学模型的建立和优化方法的选择，并通过实例验证了优化设计的效果。
Its mathematic model and choice of optimal method was expounded and the effect of optimal design was proved through calculated examples.
阐述了快速电磁铁实现快速动作的机理，建立了快速电磁铁优化设计的数学模型，并用计算机对其结构进行了最佳化设计。
Describes the mechanism of a fast response solenoid valve, gives the mathematical model of it's optimized design, and optimizes it's structure by computer.
通过建立混合电力滤波器的容量优化模型，对其整体容量进行优化设计。
The whole capacity of the hybrid power filter is optimized by building up the optimization model of it.
阐述产品的稳健优化设计的原理与方法，建立了稳健与优化设计的模型，并通过实例分析其可行性。
Offering the general principle and method of stable and optimizing designing, establishing the model of stability and optimizing designing, and then analyze the feasibility through actual cases.
选择螺旋滚筒装煤生产率作为优化设计的目标，建立了其数学模型并确定了设计变量。
A mathematic model for optimization design and design variables were established, when loading performance of the drum was select as the aim of optimum design.
基于该模糊判决，提出了一种多目标模糊优化设计数学模型求解的理想点法，给出了其详细求解方法和步骤。
On the basis of that fuzzy judgement, a kind of ideal point method for solving the mathematical model of multi target fuzzy optimal design was advanced, and its detailed solving method and steps...
分析得出了其相关的输出性能并建立其数学模型，为电机优化设计和控制打下基础。
The related output performance of the motor was obtained, and then the foundation was built for the electrical machinery optimization design and control.
对这种方案，本文建立了小信号分析模型，并在高功率条件下做了许多的数值计算研究，其结果与国外论文数据比对是相符合的，为以后的设计优化工作的进行奠定了理论基础。
The results of numerical calculation about this scheme agree with the information in the literature from abroad. It laid the foundation of the design optimization about this scheme in the future.
本文建立了飞行场地位置优化设计的数学模型并提出了其求解的最优化方法。
This article introduces the mathematical model of optimal design about airfields position and the mathematical method of seeking its optimal solution.
研究低压轴流风机的设计参数与优化模型，探讨分析其参数对紊流噪声所具有的影响，从而降低低压轴流风机的噪声。
The design parameters and optimized models of low voltage axial fan are researched, the influence that the parameters on turbulence noise is also analyzed.
文中用模拟退火算法(SA)设计求解方案，并用实例对模型和算法进行验证，生成到发线使用方案，说明其优化效果明显。
This paper use simulated annealing (SA) to solve. The optimization effect is obvious by verifying the model and algorithm with an example.
阐述产品的稳健优化设计的原理与方法，建立了稳健与优化设计的模型，并通过实例分析其可行性。
This paper applies this method to robust design and builds compromise decision support problem model of robust optimal design.
为此 ，研究了产品与过程设计活动之间的并行度优化问题 ，并建立了数学模型 ，给出了求解该问题的算法 ，其目的是使因延迟产品开发完成时间和不必要的设计修改而带来的成本尽可能最低。
A parallel optimization algorithm is proposed based on the idea of affinity maturation of immune cells in the germinal centers in order to achieve as many as possible local optimal solutions.
为此 ，研究了产品与过程设计活动之间的并行度优化问题 ，并建立了数学模型 ，给出了求解该问题的算法 ，其目的是使因延迟产品开发完成时间和不必要的设计修改而带来的成本尽可能最低。
A parallel optimization algorithm is proposed based on the idea of affinity maturation of immune cells in the germinal centers in order to achieve as many as possible local optimal solutions.
应用推荐