以聚丙烯腈共聚纤维制取了生物炭纤维(BCF)。
The biological carbon fiber (BCF) were prepared from Polyacrylonitrile (PAN) fiber.
聚醚醋嵌段共聚弹性体纤维(简称PEET)是针织工业用的新型化纤原料。
Polyether ester block copolymerized elastomer fibre (PEET) is a new type of man-made fibre for knitting industry.
文章介绍了常规阻燃纤维改性的方法,主要有共聚法、共混法、皮芯复合纺丝法和接枝共聚法。
The paper introduced the methods to modify conventional fire-retardant fiber such as copolymerization, blends, core spinning and composite skin graft copolymer.
以棉纱和粘胶丝为试料,研究了利用硝酸铵铈为引发剂的纤维素与丙烯腈的接枝共聚。
The graft copolymerization of acrylonitrile onto cotton yarn and viscose rayon with ceric. ammonium nitrate as initiator has been studied.
采用DSC、TGA、IR及PGC等方法对AN-VDC共聚体纤维在空气中受热过程中发生的化学变化进行分析。
The chemical reactions which toke place while AN-VDC copolymer was heated in air were studied with the help of DSC, TGA, IR , PGC.
研究了纤维的预辐照剂量、单体浓度、摩尔盐含量、交联剂含量以及接枝温度和时间等条件对接枝共聚反应的影响。
The effects of pre irradiation dose, monomer, Mohr's salt and crosslinking agent concentration, grafting temperature and reaction time on grating copolymerization were investigated.
探讨了聚丙烯腈原丝(PAN)的共聚组分、纯化、取向等方面对碳纤维强度的影响。
The effect of PAN precursor constitute, purity, tropism etc on the intensity of carbon fiber is discuss in more details.
又对该共聚酯的纺丝工艺和拉伸条件进行试验,得到了合适的纺丝和拉伸工艺,讨论了拉伸条件对纤维性能的影响。
By measuring spinning technology and drawing condition of the copolyester, suitable spinning conditions were obtained. And effects of drawing condition on properties of the fibers were discussed.
研究了羟乙基甲基纤维素和乙烯基共聚物两种聚合物干粉改性砂浆加水搅拌后的性能。
The properties of cement mortar modified by hydroxyethyl methyl cellulose and vinyl co-polymer were studied.
合成的嵌段共聚酯醚与PET共混纺丝可以显著改善pet纤维的抗静电性能。
The antistatic properties of PET fibers blended with the aforesaid block copolymers was remarkably improved.
该产品采用无碱玻璃纤维编织成套管,然后经高温处理,并涂有机硅共聚树脂而成。
The product is made of alkali glass fiber woven sleeve, via high temperature treatment, coated with organosilicon co-polymer resin.
将共聚物通过湿法纺丝,得到了阻燃纤维。
用正交法探讨了以高锰酸钾为引发剂的竹纤维与丙烯酸接枝共聚改性反应。
An orthogonal method is used to study the grafting copolymerization of bamboo fiber with acrylic acid by using potassium permanganate as an initiator.
本文采用干湿法纺制共聚丙烯腈纤维,并进行预氧化,碳化制成碳纤维。
Carbon fiber is produced by dry-wet spinning of copolymerized PAN followed by preoxidation and carbonization.
FTIR分析表明,吸水树脂是纤维素和丙烯酸的接枝共聚物。
FTIR shows the water absorbent resin is graft copolymer of cellulose and polyacrylate.
指出液晶共聚酯纤维具有比全芳族聚酰胺纤维高的综合性能。
The liquid crystalline polyester fibers exhibit higher comprehensive properties than wholly aromatic polyamide fibers.
第二部分,纤维素的接枝共聚物的合成。
In the second part, celluloses grafting copolymer were synthesized.
利用氧化还原体系引发乙烯基单体在棉纤维上接枝共聚以制得吸附性材料是其中的一个研究方向。
Using ethylene monomer graft-polymerize on cotton fabric is one of numerous research fields, which is the topic of this paper.
研究了羟乙基甲基纤维素和乙烯基共聚物两种聚合物干粉改性砂浆在不同养护条件下的粘结抗拉强度。
The adhesion strength of hydroxyethyl methyl cellulose modified mortar and ethylene copolymer modified mortar were studied at different curing condition.
结果表明,掺加羟乙基甲基纤维素会明显降低水泥砂浆抗折强度,而掺加乙烯基共聚物则能显著提高水泥砂浆抗折强度;
The result shows that the flexural strength of cement mortar reduces greatly by adding hydroxyethyl methyl cellulose, while adding vinyl co-polymer the strength can increase considerably.
目的以聚乳酸-羟基乙酸共聚物(PLGA)为材料,采用静电纺丝方法制备纤维支架,考察制备参数对纤维支架结构及纤维直径的影响规律。
Objective To prepare PLGA fiber scaffolds by electrospinning process and investigate the influence of preparation parameters on the structure of the scaffolds.
用过硫酸盐氧化法使超细纤维素与丙烯酸接枝共聚。
This paper describes graft copolymerization of acrylic acid onto superfine cellulose using potassium persulphate as initiator.
结果表明,共聚物中存在聚乳酸支链,产物为纤维素醋酸酯与聚乳酸的接枝共聚物;
The results showed that the product was grafted copolymer of cellulose acetate and poly(actic acid), and poly(actic acid) side chains were detected in the copolymer.
该产品采用无碱玻璃纤维编织成套管,然后经高温处理,并涂有机硅共聚树脂而成。
Silicone fiberglass sleeving, woven as sleeving by non-alkali fiberglass and coated with silicone Resin in high temperature.
纸浆纤维与丙烯酰胺的接枝共聚物经水解后可制成一种膜片状吸水材料。
Hydrolyzed polyacrylamide grafted pulp fiber could be made into a kind of water absorbent film.
为此,本文选用具有生物相容性且来源广泛的纤维素醚与单体共聚,着重于环境响应的智能化聚合物纳米胶束的制备。
Therefore, in this thesis we adopted cellulose aether which is bio-compatibility and high-yield source to prepare responsive copolymer nanomicelle.
本发明提供纤维素酯共聚体和氧化纤维素共聚体以及纤维素酯共聚体的方法。
This invention provides cellulose ester interpolymers, and methods of oxidizing cellulose interpolymers and cellulose ester interpolymers.
方法应用鼠尾胶和层粘蛋白包埋纤维状的聚羟基乙酸和聚乳酸共聚物支架与人胚雪旺细胞培养2周。
Methods The human embryo Schwann cells were cultured for 2 weeks when they were seeded on polyglactin 910 scaffolds coating with rat tail glue and laminin together.
研究了羟乙基甲基纤维素和乙烯基共聚物2种聚合物干粉对硬化水泥砂浆体积密度和毛细孔吸水率的影响。
The influence of hydroxyethyl methyl cellulose and vinyl co-polymer on the bulk density and capillary water absorption of hardened cement mortars was studied.
研究了羟乙基甲基纤维素和乙烯基共聚物2种聚合物干粉对硬化水泥砂浆体积密度和毛细孔吸水率的影响。
The influence of hydroxyethyl methyl cellulose and vinyl co-polymer on the bulk density and capillary water absorption of hardened cement mortars was studied.
应用推荐