从猫眼的球度误差、材料折射率误差和光学中心误差几个方面对猫眼产生的光学误差进行了分析。
Then, the error produced by sphericity error, material refractive rate error and optical center error of cat eye are discussed.
论述了在激光跟踪测量系统中由跟踪转镜机构和猫眼逆反射器产生的光学误差,并分析了它们对测量结果产生的影响。
The error caused by rotary tracking mirror device and cat eye reflector in the laser tracking measure system are discussed, and its effect to the measuring result is analyzed.
拍摄照片的是大熊湖太阳天文台新望远镜,采用自适应光学技术配件以便校正大气扰动误差,调节信号畸变。
The telescope that took the picture is know as the New Solar telescope which USES adaptive optics, parts that change to adapt to disturbances in the atmosphere and correct distortions in the signals.
由于大气对光波传播引起的折射效应,使得光学雷达测量中产生折射误差。
The refraction effect of light-wave when it propagates in atmosphere brings refraction error to optic radar's measurement.
本文用几何光学描述了离轴探测调焦误差信号与系统参数的关系,并与实验结果进行了比较。
Characteristics of the defocusing error signals are expressed in the terms of an off-axial detection system by geometric optics. The results are compared with experiment.
通过误差矩阵和模具的工作特性函数反求输入控制量是加工高精度的自由曲面光学镜所面临的难题。
It is a difficult problem to solve the inputted data when the matrix of error data and the working characteristics of the tool are known in precision machining.
在以前未采用AOptix终端的自由空间光学测试中,NuCrypt公司演示了由于湍流和瞄准误差出现了戏剧性的动力减弱,这也体现了这一重大挑战。
In previous FSO link tests without AOptix terminals, NuCrypt experienced dramatic power fades due to turbulence and pointing errors, representing a significant, if not impossible, challenge.
在自适应光学系统中,波前探测器的噪声是一个主要误差源。
In adaptive optics system, the noise of wavefront sensor is a major error source.
机器人视觉仪器由于机械安装引起的光学坐标系与机械基准坐标系之间的微小的角度误差可以通过高精度标定修正。
The micro Angle error between optical coordinate and mechanical datum coordinate of robot vision instrument due to mechanical assembly can be corrected by high accuracy calibration.
根据波动光学的理论,对菲涅耳近场衍射公式误差相位的影响进行了分析。
Brsed on the wave theory of optics, the affect caused by the phase error in Fresnel near-field diffraction equation is analysed.
摄像机光学畸变的修正以及图像处理的亚像素定位方法,减小了目标图像的定位误差,提高了系统的测量和调整的精度。
The correction of camera optics distortion and sub-pixel method for image processing can reduce the error of target image orientation for the precision improvement of system measuring.
为了保证用轨迹成型法加工光学零件的面形精度,对精密磨削机床影响工件面形误差的因素进行了理论分析。
In order to guarantee surface precision of using locus shaping method machining optical parts, the factors of fine grinding machine which affects surface error of part is theoretically analysed.
动态系统概念的建立为光学系统全动态调整及误差分析开辟了新的道路。
The establishment of a dynamic system concept provides new methods for optical systems in holo-dynamic adjustment and in error analysis.
结合局部标定法,对摄象机光学系统的畸变误差进行校正。
Combining with local calibration, the distortion error of the optical system in the camera is corrected.
基于衍射光学原理,获得了微透镜的衍射效率与蚀刻深度误差之间的关系式。
Based on the diffraction optical principle, a formula of the diffraction efficiency and etching depth error of the microlens is obtained.
第四,探讨了彩色显微图像输入中光学系统的误差及其消除方法,并结合实际需求,研究了图像中不规则轮廓区域面积的测量方法。
The forth, error analysis and elimination of optical system in color microscopic image input and the methods of area measurement for the irregular region in the digital image are discussed.
提出了一种用于修正光学神经网络硬件系统误差的虚拟神经网络模型。
The optical experimental results show that the virtual network can efficiently correct the errors of hardware system.
文中介绍了光学轮廓仪的测量原理及其误差分析。
The principles and error analysis of an optical profiler are described in this paper.
通过解决激光加工中材料表面温度测量装置的难点,设计了一套新型光学系统,并给出了测量误差分析及结论。
A new optical system is designed for the material surface temperature-measuring device used in laser processing. The measurement error analysis and conclusions are presented.
在自适应光学系统中,波前探测器的噪声是主要误差源。
The noise of wavefront sensor is a major noise source in adaptive optics system.
研究了光学自由曲面面形误差的评定算法。
An algorithm for evaluating form errors of the optical freeform surfaces is presented in this paper.
分析了离轴三镜系统中光学元件调整变量间的补偿关系和面形误差与调整变量间的补偿关系。
The compensation relationships among the adjustable variables and those between surface errors and the adjustable variables in off-axis three-mirror system are analyzed.
定量分析了了光学面形误差各参数(幅度、类型、空间尺度和空间分布等)对光束质量的影响。
The analysis is given in detail about the influence of several parameters of the surface error of optical elements including magnitude, type, scale size and distribution on the beam quality.
讨论了全息光学头聚焦误差信号检测的基本原理。
The principle of the detection of the focusing error signal in a holographic optic head is dis - cussed.
本文提出了一种改进的分段二次插值法描写光学系统的光瞳形状,得到了满意的效果,其坐标误差小于1%,面积误差约0.25%。
A modified segmental quadratic interpolation method which describes the shape of optical system pupil with relative coordinate error less than 1% and area error about 0.25%, is presented.
本文叙述了一种不受干涉仪系统误差及试样加工误差限制的测试光学材料均匀性的方法。
This paper describes a method for the homogeneity measurement of optical material which is free from the system errors and the sample geometrical errors.
本文叙述了一种不受干涉仪系统误差及试样加工误差限制的测试光学材料均匀性的方法。
This paper describes a method for the homogeneity measurement of optical material which is free from the system errors and the sample geometrical errors.
应用推荐