熔融金属的质量流率借助配合在浇注槽内的一个扼流元件控制。
The mass flow rate of the molten metal is controlled by means of a choke element fitted in the casting trough.
采用开关元件控制的恒流充放电是产生稳定非正弦振荡波的主要方法。
Constant current charging by switch control is the main method to generate non-sinusoid oscillation waveform.
收卷采用力矩电机恒力矩控制，印刷压辊、出料牵引压辊采用气动元件控制。
Reeling adopts constant torque control of the torque motor and the printing pressure roller and the discharging traction pressure roller adopt pneumatic component control.
根据四辊轧机的工作原理和特点，提出了借助气动元件控制测量力、并利用磁栅传感器进行精密测量的实现方案。
This paper according to working principle and characteristics of four-rolling mill, maintain several method to measure the thickness of coiled sheet which is moving.
侠盗猎车手，不像其他许多高价的游戏，用户们可以在屏幕上随意移动控制元件来适应他们的偏好。
With Grand Theft Auto, unlike many other premium games, users can move the controls around the screen to suit their preferences.
该操作系统将会扩展触控板的功能，触控板即笔记本电脑控制台用于控制桌面指针的元件。
The operating system will push the boundaries of what can be done with track pads, the part of a laptop's console used to control the on-screen cursor.
步进电机是将电脉冲信号转变为角位移或线位移的开环控制元件。
Electrical power pulse signal will be entered into angular displacement or displacement of the Central Line control components.
检查控制盘内外部各操作和自动元件有无异常，各操作用防护开关是否关闭或者在停止位置。
Examine the control panel, operating instrument and auto components, all the protection switches are on OFF position or STOP position.
管接头等元件的密封要良好，以防止空气侵入，从而控制气穴与气蚀的发生。
Fittings and other components to seal the well to prevent air intrusion, so as to control air traps and the occurrence of cavitation.
熟悉液压系统，气动元件，电磁阀，及机械传动系统，了解PLC控制原理。
Familiar with hydraulic systems, pneumatic components, solenoid valves, and mechanical drive system, understand PLC control theory.
这种电机是控制工程师在系统中应用的比较普遍的元件。
Such motors are fairly common components in systems of interest to control engineers.
GOCE及其传感器、仪表支持系统和控制元件，实际上构成了一个单一的综合重力测量装置。
GOCE, with its sensor, system of supporting instrumentation and control elements, actually forms a single composite gravity-measuring device.
控制室温所需要的那种传感元件称为恒温器。
The sensing element necessary for controlling room temperature is called a thermostat.
在前面几章已经讨论了几种控制元件或器件。
The preceding chapters discussed the various control elements or units.
电器控制系统主件均采用进口元件，性能优良，可靠性高。
Electric control system master pieces are imported components, good performance, high reliability.
根据不同工况，旋筒阀选用不同的控制元件，可以分类如下。
According to different working conditions, rotary cylinder valve selection of different control components, can be classified as follows.
过高的温度和湿度将导致控制系统元件寿命降低，并导致故障增多。
Excessive temperature and humidity will lead to the decrease of the life of the control system components and the increase of the fault.
磁粉离合器是性能优异的自动控制元件。
The magnetic powder clutch is an excellent characterized component in automatic control.
它还包括霍尔元件输入、整流控制定序器、固定停机时间脉冲宽度调制(PWM)电流控制以及锁定转子保护。
It also includes, Hall element inputs, a sequencer for commutation control, fixed off time pulse width modulation (PWM) current control and locked rotor protection.
凸轮元件把一个温度控制旋钮可操作地连接于恒温器。
The CAM member operably connects a temperature control knob to the thermostat.
磁流变液耗能器是新一代智能型耗能器，是实现半主动振动控制的理想元件。
Magnetorheological fluid (MRF) damper is a new kind of smart damper and an ideal device for semi-active vibration control.
二进制逻辑元件的一种输入，可对该元件的操作实施总控制。
An input to a binary logic element exercising overall control of the element function (s).
控制元件：为满足传动性能的需要，在系统内为控制压力，流量和方向等而配置的各种阀件。
Control components: in order to meet the needs of transmission performance, in the system for the control of pressure, flow and direction of the configuration of various valves.
控制管路：用来实现液压元件的控制或调节以及与检测仪表相连接的管路。
Control line: used to achieve the control or adjustment of hydraulic components, as well as the detection instrument connected to the pipeline.
气源处理元件、电磁控制元件、执行元件、管接头等。
Air source treatment unit, solenoid control element, actuation element and tube fitting.
给出了该仿真系统的组成、信号处理流程，以及包括弹体动力学、敏感元件和变结构控制器的仿真模型。
The composition of the simulation system, data processing flowchart and simulation mode that included the missile dynamics, sensitive element and variable structure controller were given.
控制，调节元件均安装在面板上，使用方便。
All the controlling and regulating elements are installed on the front panel for the convenience of use.
主令控制器由外壳和防爆元件等组合而成。
Master controller is constructed of shell and explosion-proof components.
熟悉液压和气压控制回路及常用动作、控制元件的工作原理，及具备维护经验。
Familiar with hydraulic and pneumatic control loops and working theories of common actions and control elements.
熟悉液压和气压控制回路及常用动作、控制元件的工作原理，及具备维护经验。
Familiar with hydraulic and pneumatic control loops and working theories of common actions and control elements.
应用推荐