请对每种修边方法给出一个实例。
各种修边方法适用于哪几种场合？
印刷、压线、修边一次完成。
常用的修边方法有几种？
本机适用于各种外底的起毛、修边和抛光加工。
This machine can be used to fluff, trim and polish all kinds of outsoles.
自动修边、喷胶、实现国外流行的修边粘尾技术。
Automatic trim margin, spray glue, realizing the technology of internationally-popular trimming margin and sealing tail.
多亏了金铜修边和小皮革陪货物，包变得可爱活泼。
Thanks to the golden brass trimming and small leather accompany goods, the bag becomes lovely and lively.
本机适用于包装盒半成品的修边、仿形、倒角、铣孔。
This machine applies to trimming, profiling copy, beveling and miling the hole of the half finish product of packing boxes.
本文介绍了汽车覆盖件模具设计中拉延模与修边模的设计。
This paper introduces the drawing die and the fixing side die of automobiles covering parts.
如果这些假设都成立的话，那么就不需要进一步的修边了。
If these assumptions are true, then you will not be further trimming.
修边同时也用来切除拔疲斜度产生地多余材料以获得直边。
Trimming may also be used to remove some of the draft material thereby producing straight side walls on the part.
合金钢材质经热处理，研磨修边刀，刀口锋利，精密度高。
Alloy steel via heat treatment, grinding blade, enable to keep sharp edge and high precision.
它经过仔细的调试，色彩校对，打印，整理，裁切，胶装，修边。
It was carefully tested, colour-corrected, printed, stacked, cut, glued and trimmed.
用仿形滚轮可上下同时对所加工的曲直线进行修边，可均匀准确修整。
The processed cruving and straight edge can be trimmed by the square roller from the top and bottom at the same time with fine, Evenness and precision.
如果不锈钢的宽度在轧制时没有得到很好的控制，就必须进行修边处理。
If width of the stainless steel strip is not controlled during rolling, the edges must be trimmed.
所以，针对覆盖件开发一套实用的修边冲孔模cad系统无疑是十分必要的。
So it is very necessary to exploit a practical CAD system for panel trimming and punching die design.
与工作台相邻的第三个装置，包括传送带，板栅修边用模具和第二条传送带。
Adjacent to the table is the third unit which contains a belt conveyor, a grid trimming die and another belt conveyor.
其中气动修边能有效地消除碟形磨边所产生的锯齿状边，使砖坯周边光滑平整。
Pneumatic squaring head can square the sawtooth edge produced by disc heads, with smooth and flat edges.
为减少修边模的开发周期和成本，提出一种基于板料网格变形的修边线确定方法。
To reduce the cost and lead time of developing a trimming die, a method to obtain the trimming line in flange process is proposed on the basis of blank grid deformation.
准确的修边量控制技术使得用我们的修边晶片所制作的晶体电性能一致性非常好。
The unique beveling knowhow contributes us with very good consistency at the electronic characteristics of crystal.
影响翻边成型性和成型精度的一个重要因素就是零件修边后的形状和尺寸是否合理。
The shape and dimension after trimming is the most important factor which affects the forming precision.
对薄板的边缘进行修边以使两边平行。此工艺可在不锈钢工厂或不锈钢加工者处完成。
Trimming of the edges of sheet strip to make them parallel. This done at either the stainless steel mill or at the stainless steel processor.
车身零件翻边前一般有修边工序，需要准确的修边线，否则翻边后零件达不到零件尺寸要求。
Before flanging auto-body panels, a feasible trimming line should be obtained, otherwise the final part shape after flanging cannot meet the dimensional requirement.
由于拉伸件在拉伸后边缘不平整，一般需要修边才能达到要求，通常采用侧切和旋切模实现。
Because after being drawn the edge of a drawing piece is no flattening generally it needs edge trimming to meet the demand usually realized by side-cutting and turn-cutting dies.
分析了轴盖的冲压工艺性，对传统工艺进行了改进，介绍了其复合模和修边模结构及设计要点。
The work process of the trimming die for vertically forming the thin-wall barrels of the shell top part of hot-water shower device was introduced.
实用性能好，我们的封边带在实用一段时间后，修边表面会发亮，不会粘灰，不变黑，光亮如新。
Practical performance is good, and our sealing sideband in practical after period of time, trimming surface will shine, not glue grey, constant dark, if brightness is new.
分析了消声器隔板的成形工艺，在两次拉伸工序中间增加修边工序，从而保证了零件的成形尺寸。
The forming process for the insulation plate of the muffler was analyzed. The trimming operation was added between the two times of drawing to ensure the forming dimensions of the part.
分析了消声器隔板的成形工艺，在两次拉伸工序中间增加修边工序，从而保证了零件的成形尺寸。
The forming process for the insulation plate of the muffler was analyzed. The trimming operation was added between the two times of drawing to ensure the forming dimensions of the part.
应用推荐