该产品也可用于一般模拟信号隔离的应用要求精度高，稳定性和线性下同样严重的噪声条件。
The product can also be used for general analog signal isolation applications requiring high accuracy, stability and linearity under similarly severe noise conditions.
通过参数的灵活设计，可以满足不同的输出电压隔离要求，应用于不同的模拟信号隔离场合。
By flexible design of the parameters, the circuit can satisfy different requirements of output voltage, and it is excellent solution for many analog isolation problems.
研究了应用线性光耦合器组成模拟信号隔离电路的设计方法、调试方法以及提高线性度的方法。
The design method, debug method and the method of enhancing degree of linearity are researched in the constituting of analog signal isolating circuit with linear optical couplers.
同时我们还可以为客户提供全面可靠的信号隔离器、信号调理器、信号变送器等整体解决方案。
Simultaneously we may also provide comprehensive reliable whole solution archives and so on signal disconnector, signal recuperation, signal transmitting instrument for the customer.
在信号传感器或信号转换器遇到接地的输入或输出信号时，电流环路信号隔离器减少现场测量难题。
DEVAR current loop signal isolators reduce problems found in field measurements when signal transmitters or converters encounter both input and output signals that may be grounded.
计算机控制系统的设计与智能仪表的研制开发必须要考虑抗干扰问题，信号隔离是抗干扰的重要措施。
The problem of antijamming must be considered in designing and developing computer control systems and intelligent devices. The signal isolation is an important meathod to reject interference.
针对电流小信号采集中存在噪声干扰的问题，采用高线性度模拟光耦hcnr 201设计了电流信号隔离采集板。
Aiming at the noise jamming problems in acquisition of small current signals, an isolation and acquisition board for current signal is designed based on HCNR201 high-linearity analog optical coupler.
在此基础上，设计了软件流程和代码。基于CAN总线在矿井环境下容易受到外界干扰的弱点，使用6N137进行信号隔离。
The paper also introduces software process and code based on fore methods and adopts 6N137 as signal isolation to solve outside interference weakness under mine environment based on CAN Bus.
探讨了集散控制系统DCS安装调试过程中出现的交流干扰、直流电位等现象的隔离问题以及信号隔离器在解决这方面问题的应用情况。
Discusses the separation of ac interference and DC potential, etc, during installation and commissioning of DCS systems, and the application of signal spacers to solve this kind of problems.
通过将生物体与外部的周期信号完全隔离，生物学家了解到生物体有内部的生物钟。
By isolating organisms completely from external periodic cues, biologists learned that organisms have internal clocks.
Fingolimod通过阻止免疫细胞攻击髓磷脂而起作用。髓磷脂是一种脂肪能够隔离神经纤维从而帮助他们在大脑和躯体之间传导信号。
Fingolimod works by preventing immune cells from attacking myelin, the fatty substance that insulates nerves and helps them transmit impulses between the brain and the rest of the body.
这项技术通过双能X-射线成像，重叠的组织信号可以被隔离，并利用不同能量的X射线的改变衰减量化。
The technique makes use of dual energy X-ray imaging, where overlapping tissue signals can be isolated and quantified by exploiting the change in X-ray attenuation at different energies.
考虑了工作信号躁声，感光光电二极管深嵌入硅片中，与芯片表面上产生噪声的元件相隔离。
Operating signal noise was also considered, and the sensor photodiodes were deeply embedded in silicon to isolate them from noise-causing elements on the chip surface.
其特征是不要外接偏置电压源，而由一个特殊隔离变换器将输入逻辑信号变换为能快速开通或关断IGBT模块的驱动电力。
Its feature is that the input logical signal is converted to drive power by a special isolated converter, which makes a IGBT module turn on or off quickly, without any other biased voltage sources.
这种结构既方便地实现敏感元和信号处理电路的完全隔离，又有效地改善了敏感特性和稳定性。
The novel structure not only realizes the complete isolation of the sensitive elements from the signal processing circuits, but also sufficiently improves the stability and the sensitivity.
母钟设备可以采用光电隔离措施，保证不会因为外部输入信号的因素而对主机设备造成干扰和损害。
Master clock photoelectric isolation measures can be used to ensure that the input signal will not be because of factors external to the host and cause interference and damage equipment.
由于运八系列飞机上装备的机载设备种类比较多，测试信号复杂，单纯使用一种故障诊断方法很难达到故障诊断与隔离的目的。
There are many kinds of air-borne equipments and the signals to be measured are complex, it is hard to attain the goal of fault diagnosis and isolation just use one method.
脉搏信号微弱、敏感、易受干扰，因此为了消除脉搏测试中的各种噪声，设计了隔离电路和多重滤波电路。
Weak pulse signal, sensitive, vulnerable to interference, in order to eliminate the noise pulse test, the isolation circuits and multiple filter circuit design.
在硬件抗干扰方面，本课题采用光电隔离的方法成功的对输入光电编码器的信号进行了整形，并隔离了输出负载对电路的影响。
In hardware aspect, this paper use optical-electric insulation method stronger the signal of optical-electric encoder and insulate the infection of out load for main circuit successfully.
主控电路发出6路PWM信号，经过功率电路隔离和放大，驱动交流永磁电机运转。
The main control circuit sends 6 PWM signals. After the isolation and enlargement by the power circuit, these signals could drive the Permanent Magnet Synchronous Motor (PMSM for short).
探讨了两次采样循环之间的衔接、提高转速测量分辨率、键相位信号的隔离和预处理等问题的解决方案。
The solution for linking twice sampling cycles, enhancing resolution of measurement of rotating speed, isolating and processing keying phase signal, are investigated.
仪器采用独特的高速磁隔离数字传感器直接采集输入的电压、电流信号，保证了数据的可靠性和安全性。
Using a unique high-speed magnetic isolation digital sensor to directly collect the signal of input voltage and current, ensure the data reliability and security.
仪器采用独特的高速磁隔离数字传感器直接采集输入的电压、电流信号，保证了数据的可靠性和安全性。
It USES a unique high-speed magnetic isolation digital sensor to directly collect the signal of input voltage and current, ensure the data reliability and security.
使用该方法构建了干扰信号，同时给出了采用该方法实现干扰机收发隔离的电原理框图。
A jamming signal based on this method is constructed, and at the same time a blue print is given which shows how to realize the isolation between receive and transmitter of a jammer by this method.
采用电压频率变换和频率电压变换技术处理模拟信号，有效的克服了光电耦合器的非线性，实现了模拟信号的线性光电隔离。
Analog signal linear photo-isolation is carried out by using voltage-frequency conversion and frequency-voltage conversion technique so as to effectively overcome nonlinearity of the photocoupler.
此肌电放大器的前置部分采用共模驱动，以达到提高其共模抑制比和输入信号的动态范围，以及抑制工频干扰等作用，并采用线性光耦隔离。
Apart from employing the linear optocoupler isolation, this EMG pre-amplifier uses the boost to enhance the CMR and the input swing and reject the industry interference.
本文以隔离的热电阻温度变送器信号调理电路为例给出了适用于其它传感器的隔离的变送器信号调理电路。
An isolated transducers signal conditioning circuit for other transducers is proposed taking isolated signal conditioning circuit for thermistor temperature transducers for example.
在硬件方面，采用RC滤波器、压敏电阻、光电隔离等措施，消除了采样通道及A/D通道的干扰信号；
For hardware design, RC filter, voltage sensitive resistor and photoelectric isolation method are used to eliminate interference signal in sampling channel and A/D channel.
开关量输出模块是将PLC内部低电压信号转换成驱动外部输出设备的开关信号，并实现PLC内外信号的电气隔离。
Output switch module is a low voltage PLC internal drive external signals into the switching signal output device and to achieve internal and external PLC electrical signal isolation.
开关量输出模块是将PLC内部低电压信号转换成驱动外部输出设备的开关信号，并实现PLC内外信号的电气隔离。
Output switch module is a low voltage PLC internal drive external signals into the switching signal output device and to achieve internal and external PLC electrical signal isolation.
应用推荐