作为对该项研究的回应，Weast的工程团队重新设计了芯片。
In response to the research, Weast's engineering team redesigned the chips.
本文对于利用FPGA芯片进行系统设计的研究人员具有一定的参考价值，也可以作为LONWORKS现场总线智能节点开发的参考资料。
The paper maybe value to those who ready to use FPGA chips in their designs or be reference for development of neuron node based on LONWORKS field-bus technology.
用TMS320F 2407作为系统核心控制芯片，对控制系统的硬件电路和软件设计进行了研究。
Additionally the control system's hardware circuit and software design are studied with TMS320F2407 as its core chip.
设计了以DSP芯片作为控制核心的位置控制模块。
Design a position control module which USES DSP as the main chip.
设计采用数字信号处理器(TMS320 LF 2407dsp)作为主控芯片，能提高控制系统的实时性和数据处理能力。
This design USES digital signal processor (TMS320LF2407 DSP) as a control chip, which helps the system to improve the real-time control capability and data processing capability.
本论文讨论用PLD芯片作为主要控制逻辑来设计计算机数字视频系统的一个典型应用型产品——LED视频电子显示屏系统的研制方法。
The thesis discusses on how to research and then design the LED video panel system, which is a typical product of computer digital video system, by using the PLD chip as the main control logic.
然后，选择TI公司的DSP芯片TMS320LF2407作为控制系统的中央处理器，进行了自动分捡装置控制系统的设计。
Then, DSP chip TMS320LF2407 of TI company is chosen as the CPU of control system, and the control system of the automatic sort device is designed.
以TMS320F2812作为主控CPU，以IR2110作为驱动芯片，完成了导弹舵机伺服控制系统的硬件设计，进行了控制器主电路的分析与设计。
The missile rudder servo controller adopts TMS320F2812 as main CPU, IR2110 as drive chip. Each part of main circuit is analyzed in detail.
在该系统设计中，以FPGA芯片作为核心器件，通过底层软件编程实现高强度聚焦超声的数字化相位调控。
In the system design FPGA slug as a key device realizes digital phase control of high intensity focused ultrasound through base software programming.
为了提高开关频率和控制精度以达到更好的效果，设计中采用数字信号处理器TMS320F 2812作为控制芯片，实现了全数字化控制。
And this design makes DSP TMS320F2812 be control chip. This method improves switching frequency and control precision. It can achieve Full Digital control.
各个节点设计上采用内置CAN模块的飞思卡尔16位单片机作为主控芯片来搭建硬件电路，以实现CAN总线的物理层和数据链路层。
Through using 16-bit freescale MCU embedded CAN controller as master chip in each node, it achieved the design of hardware circuit, so realized CAN physical layer and CAN data link layer.
本文以TMS320 LF 2407 A作为主控芯片，设计了整个系统的主控制电路。
In this paper, the total system control circuit based on TMS320LF2407A was designed.
作为生产微机械陀螺仪最核心的内容，芯片的成功设计与加工具有非常重要的意义。
MEMS gyroscope as a production core content, the success of chip design and processing has very important significance.
设计了以通用DSP芯片作为控制核心的位置控制模块。
每个单相电路采用一片平均电流模式控制芯片uc 3854 B作为控制核心，电路简单，参数设计方便。
A average circuit mode control chip UC3854B is used to control each phase, thus the circuit and parameters are easy to design.
文章介绍了一种采用PCI专用接口芯片pci9052作为PCI总线与DSP (TMS320 LF 2407)的接口桥接器，实现6轴运动控制卡的硬件设计方法。
In this article, to carry the 6-axis motion controller out, a method of using PCI special interface chip PCI9052 to be a interface bridge of PCI bus and DSP (TMS320LF2407), was introduced.
作为其核心，视频采集技术也趋成熟，可用于视频采集卡设计的集成芯片种类繁多。
As the central part of video monitor system, the technology of image grab card has become more and more mature, and there are many kinds of chips that can be used in design.
作为虚拟特征生成实例，本文以电子设备概念设计为例，详细介绍了系统级和芯片级的虚拟特征生成方法。
As examples of VFG, this paper introduces in detail the system - and chip-level VFG of electronic devices.
采用FPGA作为主控芯片，在FPGA内部设计了刺激脉冲发生器，多路选择器和串并转换器。
It USES FPGA as its main control chip. The FPGA comprises a spike generator, a serial-to-parallel converter and some multiplexers.
本文以ADV611为基础，用TMS320C6205作为核心控制芯片，设计了汽车视频图像实时存储系统。
This article take ADV611 as a foundation, with TMS320C6205 as the core control chip, has designed a real-time memory system of the automobile video image.
作为IIC总线的一个实例分析，采用S3C44B0X作为处理器控制IIC设备TEA5767芯片，实现数字收音机的设计。
Then, as an application example of IIC bus, a digital radio design with S3C44B0X and TEA5767 chips was given in detail.
JTAG作为测试标准已为芯片设计与制造厂商接受和应用。
As an IEEE test standard, JTAG is accepted and used by many IC design companies and manufacturers.
本设计以新华龙公司的C8051F 330作为数据采集系统的核心芯片，利用蓝牙技术，建立一套完整的无线传输试验的检测技术、方法与规程。
C8051F330 from Xinhualong Company is the core chip of this system. Bluetooth technology is used to establish an integrated detection technology, methods and procedures of wireless transmission test.
作为一家致力于半导体芯片研发设计的公司，高拓讯达秉承团队合作的精神。
As a company which is focused on IC design, AltoBeam has established highly motivating R&D environment and flexible working style with team spirit at the center.
成功源于合作是英盛德作为一家世界领先的系统到芯片集成电路设计公司的一贯理念。
Success through Partnership is the philosophy of Sondrel, one of the world's leading system-to-silicon IC consultancies.
本模块经过进一步优化验证，将作为子模块用于ASIC设计的蓝牙芯片。
This module will optimize, and used to bluetooth chip of ASIC design.
LED006X型LED日光灯管是我公司选用进口芯片并自主封装的LED作为光源，按照GB_50034-2004《建筑照明设计标准》标准制造的一种绿色环保新型节能灯具。
HRDG009-LED006X LED daylight is a new type , eco-friendly lamp, with imported chips and self-packaged LED as light source, manufactured according to GB_50034-2004.
设计开发的电除尘器电源控制器采用ARM9系列STR912微控制器作为主控芯片，供电电源及信号输入输出模块采用光耦隔离设计方案。
Power controller adopts STR912 of ARM9 series as microcontroller, and USES the technique of optical coupling isolation within the input, output and power supply module.
利用W78E52B单片机作为调制解调器的控制芯片，FX589作为GMSK调制解调芯片，设计并实现了调制解调器。
W78E52B is used as a modem control MCU chip, FX589 as GMSK modulation and demodulation chip, the design and realization of the modem. The circuit is simple, reliable and small size.
采用嵌入式单片机作为在线监控系统的核心芯片，设计了基于波峰检测的高速数据压缩的数据采集模块，捕获突发的故障波形。
The module with an embedded CPU has a data acquiring board based on detecting waveform peaks and high speed data compression for capturing the signal of the outburst failure.
应用推荐