采用调查表法进行现场作业采访、观察和评估作业位置的各项安全卫生指标。
The various criterions of work safety and health for a working place are evaluated with a method of checklist.
结果认为，不同的作业位置其手钓产量不同，其中船头产量为最高，手钓平均脱钩率不到10%。
The results showed that the catch of jiggers varied with different fishing positions, of which the stem was the highest catch. The average dropping rate was less than 10 percent.
应用程序虚拟化是通过智能管理和优化应用程序工作负载、将作业放到合适的位置，以及控制应用程序组合来实现的。
Application virtualization does so by intelligently managing and optimizing application workload, driving the work to the right place, and controlling the application mixture.
作业分配器将单个作业日志存储在提交者可以访问的位置。
Job Dispatcher stores the single job log in a location where the submitter can access it.
人们应该更关心节点的运行位置以及运行的作业。
People would be more concerned with where their nodes are running and how long the job has been running for.
对产生严重职业病危害的作业岗位，应当在其醒目位置，设置警示标识和中文警示说明。
It is also required to post conspicuous warning mark and the warning message in Chinese at the workplace severely harming the occupational health.
这种组合使基本节点或Network Deployment单元可位于在地理上远离作业管理器自身的位置。
This combination enables the base nodes or Network Deployment cells to be located geographically distant from the job manager itself.
每天作业完的吊篮应停在首层安全网以上位置。
The daily work hanging basket should stop above the first safety net the position.
郎恩先生表示，这使得调查人员能够了解到渔船作业的确切位置。
Mr. Long says that permits investigators to understand exactly where the fishing boats are operating.
该系统实现无人监控、自动记录、绘制紧扣转矩—圈数曲线，可方便、直观地反映下套管作业的全过程及有问题套管所处的位置。
The system can record and plot the make up torque turn curves automatically, and it also can monitor whole process of casing job and find out the location of the casing with trouble.
所述脚踏开关允许操作员有选择地保持所述地面驱动控制器和作业工具控制器之一或两者的位置。
The foot pedal allows an operator to selectively hold the position of one or both of the ground drive control and work tool control.
当所述脚踏开关在第一位置时，所述作业工具控制器和地面驱动控制器不受影响。
When the foot pedal is in a first position, the work tool control and ground drive control are not affected.
为高空作业车更大的驾驶乐趣，控制，以确保其使用的位置很容易直觉，而每次刚刚合适的权重为自然、自信鼓舞人心的感觉。
For even greater driving enjoyment, the controls are positioned to ensure their use is readily intuitive, while each has just the right weighting for a natural, confidence inspiring feel.
设计注重站段位置，使到、发列车和调车作业交叉干扰较轻；
The attention was paid to the location of the station section in the design.
为确保在井筒内的正确位置实施处理作业而对深度进行测量和对比所使用的程序和设备。
The procedures and equipment used to measure and correlate depth to ensure that a treatment is applied at the correct position within the wellbore.
该播种机由变量控制器控制机械式无级变速器，根据GPS的位置信号，完成处方图设计的播种施肥作业。
It could be accomplished sowing work prescribing by the application maps based on the GPS signal under the control of mechanical variable speed unit.
如果整个字串仅包含有效的字元(根据其在输入遮罩中的贴上位置)，整个作业将会成功。
If the entire string only contains valid characters, according to their paste position in the input mask, then the entire operation will succeed.
运用产生降水的指标性物理量分布、卫星云图降水概率分布和模式的降水预报等综合确定作业区的地理位置。
The operation location can be determined by means of precipitation indexes, precipitation probability of satellite cloud pictures and model forecasts.
如果写入作业成功，资料流的目前位置以写入的位元组数目前移。
If the write operation is successful, the current position of the stream is advanced by the number of bytes written.
粉碎作业在金属矿选矿厂占有重要位置，是耗电最大的作业，尤其磨矿作业更为突出。
Smash operation plays an important role in metallic ore concentration plant and it consumes maximum power, especially grinding operation was even more evident.
针对清刷机器人水下作业的非线性特点，采用参数自调整模糊控制策略设计了位置模糊控制器，保证了机器人具有良好的姿态调节能力。
Due to the nonlinearity of the robot system, position controller USES the parameter self-adjusting fuzzy control strategy, which assures good pose regulating power.
可用于深井、超深井钻井作业中漏失层位置的测定。
It can be applied to leakage zone during the deep well measurement and the ultra-deep drilling operation.
当所述脚踏开关在所述第二位置或者第三位置时作业工具控制锁用来防止所述作业工具控制器启动。
A work tool control lock is used to prevent the work tool control from engaging when the foot pedal is in the second position or the third position.
在层间隔离封隔器坐封并测试后，操作人员将TORRENT充填的服务工具定位在最下层的位置上来对此层进行挤压充填作业。
After the zonal isolation packers were simultaneously set and tested, the TORRENT service tool was positioned at the lowermost zone to perform the frac-pack stimulation.
当所述脚踏开关在第二位置时，所述作业工具控制器的位置被保持而所述地面驱动控制器不受影响。
When the foot pedal is in a second position, the position of the work tool control is maintained, while the ground drive control is not affected.
表示呼叫位置上的动态删除成员作业，并提供系结语意和作业详细资料。
Represents the dynamic delete member operation at the call site, providing the binding semantic and the details about the operation.
表示呼叫位置上的动态取得成员作业，并提供系结语意和作业详细资料。
Represents the dynamic get member operation at the call site, providing the binding semantic and the details about the operation.
表示呼叫位置上的动态删除索引作业，并提供系结语意和作业详细资料。
Represents the dynamic delete index operation at the call site, providing the binding semantic and the details about the operation.
表示呼叫位置上的动态建立作业，并提供系结语意和作业详细资料。
Represents the dynamic create operation at the call site, providing the binding semantic and the details about the operation.
表示呼叫位置上的动态建立作业，并提供系结语意和作业详细资料。
Represents the dynamic create operation at the call site, providing the binding semantic and the details about the operation.
应用推荐