改装常用遥控飞机、遥控船上都会用到的伺服机。
Re-equips the commonly used pilotless plane, controls remotely the server which on the ship can use.
不接电脑，插接电变的BEC，及数位伺服机，离线使用程式卡。
Plug BEC from ESC, then digital servo into this card for offline use.
利用伺服机对大理岩进行高围压及高围压高水压岩石的卸荷力学试验。
Using the RMT-150B servo-controlling testing machine, unloading mechanical tests of marble under high confining pressure and high water pressure conditions were carried out.
我司为全球第四大工业伺服机供应商之关系企业，是以伺服器技术转移至LED照明的第一家公司。
We are associates with the world's fourth largest industrial server suppliers, as the recipient of a high power LED technology transfer.
本文设计的是一种在单片机89c 51控制下红外遥控伺服车，伺服机是经过特殊改装后的伺服机。
This article designs is one kind under the monolithic integrated circuit 89c51 control the infrared remote control servo vehicle, after the server is passes through the special re-equipping server.
就可用性而言，这个计算系统是一个冗余设计，有两组处理器和总线，能够在主机无应答的情况下在主机和伺服机之间进行切换。
For availability, this computing system was a redundant design, with two sets of processors and buses and the ability to switch between a master and a slave if the master was found to be unresponsive.
黑莓机企业版伺服器由俄国系统业者或企业自行掌控。
BlackBerry enterprise Servers for Russian corporate clients are hosted by the operator or the enterprise.
提出了电液伺服系统的支持向量机的辨识建模方法。
A method of the electro hydraulic servo system identification modeling is presented based on support vector machines.
基于伺服电机直接驱动的折弯机数控技术则是一门新兴的技术。
Based on direct drive servo motor CNC bending machine technology is an emerging technology.
介绍了液压伺服阀和位置传感器在拉弯矫直机中的应用。
The application of hydraulic servo and position sensor on stretch bender was introduced.
本文通过对普通模糊控制器的改进，研究出一种高精度模糊控制策略，并将其应用于校直机液压伺服控制系统。
This paper proposes a high accuracy fuzzy control strategy which has improved the common fuzzy controller and been applied in the alignment of the straightening hydraulic servo control system.
本文介绍了阀门定位用机液伺服系统的工作原理及常见故障。
The paper introduces the principle and fault of the mechanical - hydraulic servo system on locating the valve.
伺服控制型文变压力试验机将成为国内外交变压力试验机的发展趋势。
Servo control alternating pressure test will be the trend of alternating pressure test in nation and abroad.
介绍了一种由at89c 51单片机控制交流伺服电机的系统方案，包括系统硬件设计和软件设计。
The paper provides a scheme to control AC servo-motor using single chip-computer AT89C51, including hardware design and software design.
完整的PE系列AGME电子伺服压力机PE执行了主要的控制功能：工作过程中的压力、距离、接触位置和最终位置，以及最终的应用压力。
The complete PE AGME electric presses PE perform the major control functions: force during course, distance, contact and final positions, and final applied force.
平行多辊矫直机是材料平整工业中十分重要的设备，但高精度液压位置伺服控制矫直机国内还很少。
Parallel multi-roller straightener is an important equipment in the materials straightening industry. But high-precision straightener with hydraulic position servo-control can hardly be made in China.
介绍自行研制的基于80C196KC单片机的交流伺服电机控制卡的硬件设计及其软件实现。
The paper introduces the hardware and software design of an AC servo motor control card based on 80C196KC.
方位控制器伺服系统是一种机、电相结合的系统，机械传动装置根据控制信号驱动执行元件完成指令要求的运动。
The servo system of azimuth controller is a combine system of mechanics and electrics, the transmission mechanism drives the executive element by control signal to carry out the demanded motion.
介绍了数控钢琴键盘加工机中的P LC和伺服系统的工作原理及整个系统的硬件和软件的设计。
This article introduced the numerical control piano keyboard machine discussed, PLC servo system working principle, design of hardware and software of the whole system.
该文研究了可重写光盘机DSP数字伺服控制的问题，给出了数字控制系统的硬件构成。
The problems are studied about the digital servo using Digital Signal Processor (DSP)for rewritable optical disk drives, and the system scheme is presented.
本文提出了一种新的机液伺服阀，概要介绍了这种阀的工作原理，结构特点及应用情况。
This paper puts forward a new mechanical-hydraulic servo valve, and briefly introduces operation principle, structural characteristics and application of the valve.
介绍伺服驱动控制技术在多工位压力机的输送系统上的应用情况，重点介绍伺服控制系统的工作原理及组成。
The article presents the application of servo control in the conveying system of transfer press, particularly describes the operating principle and composition of servo control system.
以MCS -51系列单片机和交流伺服装置组成的舰载雷达稳定平台伺服系统为对象，采用带修正因子的FUZZY控制器对其进行控制。
FUZZY controller with a correcting factor is utilized to control a ship based radar stabilizing plant servo system consisting of a MCS 51 family single chip computer and ac servo units.
在上述系统软、硬件平台确定以后，研究了基于PC机的直线交流伺服系统的具体实现方法。
This paper researched the realization of PC-based linear AC servo system after hardware and software platform are confirmed.
使用XTR01型微机控制电液伺服试验机，采用梯级加载法，对煤岩进行了三轴蠕变试验。
Triaxial creep tests on coal rocks are carried out by Step Method and the XTR01 electric-fluid servo compression machine.
基于在伺服试验机对煤样的常规三轴压缩和三轴卸围压试验，分析了煤样在不同应力条件下的强度和变形特征。
The pseudo-triaxial compression tests and confining pressure reduction tests were carried out for coal specimen strengths in different stress on servo-controlled testing machine.
采用交流伺服电机和机械驱动进给系统的冷轧环机，其进给伺服控制系统的设计需要一个新的工艺动力学模型。
The feed drive system of a precision cold ring rolling mill adopts AC servo motor and mechanical transmission, rather than conventional electro-hydraulic actuator.
本文本文研究设计的就是为了解决工业缝纫机伺服系统的研发项目而进行的。
The research and design of this article were done for the item of industry sartorius.
本文本文研究设计的就是为了解决工业缝纫机伺服系统的研发项目而进行的。
The research and design of this article were done for the item of industry sartorius.
应用推荐