对象模型的一部分可以使用位掩码(bit mask)或原生数组来优化,并牺牲可读性来提高速度。
Portions of the object model might be optimized using bit masks or native arrays, sacrificing readability for speed.
提高了装载机连杆机构的设计速度和设计质量,这种数学模型对于反转六连杆机构的优化设计具有普遍的适应性。
This mathematical model improves the design speed and quality of loader connecting rod mechanism has general applicability to the optimization design of RSCPM.
本文从神经网络模型的结构出发,对学习算法提出了一系列改进和优化措施,以加快网络的学习速度,并增加模型的稳定性。
With the study of neural network model, this paper advances some of improvement and optimization techniques that can accelerate the learning speed of network and increase the stability of model.
根据飞剪剪切机构的工作特点,综合考虑连杆运动轨迹、速度和位置角,建立多目标优化模型。
Based on the working feature of flying shear mechanisms and considering the motion track, velocity and position Angle of connecting rod, a multi-objective optimization model is built.
借助于局部数学模型的简化和计算方案的优化提高了运算速度。
The simplification of local mathematical models and the optimization of calculation scheme have led to increase the computing speed.
用双层规划思想建立先进出行者信息系统和油耗的最优速度确定的优化模型。
A bi-level programming model is proposed to describe the optimization programming problem for the optimal velocity with advanced traveler information systems(ATIS) and fuel consumption.
本文采用传统方法进行电火花线切割加工工艺参数优化,分别建立了加工速度和表面粗糙度的数学模型。
This article is about the processing parameter optimization achieved through the traditional method to set a mathematical model of the processing speed and surface roughness.
采用三角网格优化算法解决场景中模型复杂度高、交互运行速度缓慢的问题;
The three angle mesh optimization algorithm is adopted to solve the problem of the model complexity and the slow interactive running speed in the scene.
建立了速度匹配的优化设计模型。
An optimum de-sign model for selecting speed parameters is set up based on that.
本文给出的带权优化曲线回归模型参数计算公式,修正参数速度快,拟合精度高,效果显著。
The calculating formulae of weighted optimum curve regression model parameter given in this paper possesses high speed of parameter correcting, high precision of fitting and obvious effect.
这种建立模型的思想还可以应用到需要计算海森矩阵的动态无功优化、最优潮流以及状态估计等问题的算法中,以提高其计算速度。
This proposed modeling idea can also be applied to dynamic reactive optimization, optimal power flow and state estimation for a faster calculation.
利用孤岛模型的并行算法提高了优化的速度和质量;
The island-based parallel algorithm speeds up the convergence and improves the quality of the results.
同时对广泛的支持向量回归模型、优化支持向量模型的泛化能力和运算速度等方面进行讨论。
The generalization of the support vector regression model, the optimization of the generalization capacity, and the training speed are discussed.
本文通过分析长距离输送系统中胶带输送机的张力特性、负载特性和机械特性,建立了其速度和加速度驱动模型并进行了优化。
Based on analysing the long-distance tape conveyor and its characteristics of tension, load and mechanic, this paper sets up its optimized speed-driven and acceleration-driven model.
演化学习具有全局优化性能好,实验样本数要求少等优点,但也存在一些问题,如演化学习的速度较慢、模型的稳定性较差等。
But it has some disadvantages, for example:the rate of evolutional learning is too slow sometimes, and the stability of network is discontented.
该方法利用加速度传感器的动态标定数据,采用遗传神经网络搜索和优化动态模型参数。
In this method, the dynamic model parameters of accelerometer are optimized by genetic neural network according to measurement data of the dynamic calibration.
以多模型PID、多模型滑模控制和多模型优化的模糊控制算法解决深度、速度、纵倾和航向控制问题。
Multiple PID, Multiple Sliding mode and Multi-model based fuzzy controllers are introduced to solve the speed, depth, pitch and yaw control problem respectively.
然后,本论文运用最优化和跟驰理论确定了车辆稳定跟驰行驶速度与车辆在该状态下的车头间距和行驶时间之间的关系,并通过该关系建立了路网临界速度一模型;
The theory of optimization and car-following are adopted to determine the relationship between traveling speed and headway in this dissertation, and a model about critical speed is made.
在模锻过程可视化研究中,提出采用混合单元模型及整体优化变形速度场的方法对模锻过程进行上限元法模拟。
This paper presents a new method which uses the mixed-unit model and optimizes the global velocity field in the visualization research of die forging process.
根据川西南威远气田大水量气井现场测试数据,建立了举升油管和油套环空气液两相流压降优化模型。将油管内的持液率模化为气相、液相无因次速度和液相无因次粘度的函数;
An optimal model is proposed for predicting the pressure drop of two-phase flow in gas well tubing and annulus, based on the measured data from the gas field of southwest Sichuan, China.
为提升算法的收敛速度,采用参数自适应优化算法动态搜索模糊支持向量机的模型参数。
The adaptive parameter optimization algorithm is applied to dynamically search the parameters of FSVM(Fuzzy Support Vector Machine) to enhance the convergence speed.
本文在简要分析多信息自动闭塞系统速度 -间隔理论的基础上 ,建立了列车速度 -间隔控制方案的优化模型 ,介绍了模型的求解和实用算法的构造并给出了算例。
The essence of the affairs is the absence of corresponding theory and theoretical instructions. Based on the brief analyses of the theory on velocity interval control of automatic block system with m…
本文在简要分析多信息自动闭塞系统速度 -间隔理论的基础上 ,建立了列车速度 -间隔控制方案的优化模型 ,介绍了模型的求解和实用算法的构造并给出了算例。
The essence of the affairs is the absence of corresponding theory and theoretical instructions. Based on the brief analyses of the theory on velocity interval control of automatic block system with m…
应用推荐