这种方案一般会包括使用自动化过程模拟功能来优化业务过程模型的功能。
Such solutions commonly include the ability to optimize business process models using automated process simulation capabilities.
通过工况的识别以及模型参数的离线辨识和在线优化，混合模型可以准确地模拟复杂过程在大范围内的动态特性。
By recognition of work condition, off-line identification and on-line optimization of parameters, hybrid model can be used to simulate dynamics of complex process correctly in a large scale.
在技术层次，基于严格的单元过程模型进行单元过程模拟和优化，修正战略层次过程模型参数。
At the tactical level, rigorous models are utilized to simulate and optimize unit processes, and provide more fitful unit process models for the strategic level.
实例表明，在工艺优化设计和器件性能预测中用回归模型代替工艺-器件模拟具有较大的优越性。
The examples indicate that using regression model instead of process and device modelling is superior in process optimized design and device performance prediction.
该模型可进一步用于末敏弹系统的弹道修正、参数优化和弹道模拟。
The model can be applied further to ballistic correction, parameter optimization and ballistic simulation of TSP systems.
利用流程模拟得到的装置模型，对常压塔常一线航煤进行离线操作优化，达到航煤产量最大化的目标。
With the draw ratio of aviation kerosene as the optimization objective, off-line operating optimization has been done by the plant model of process simulation.
遗传算法(GA)是模拟自然界生物进化机制的计算模型，是一种全局优化搜索方法。
As a global optimized search means, Genetic Algorithms (GA) are computational models simulating the evolutionary mechanism of nature.
本模型简单可靠，可用于超临界流体萃取天然产物过程的预测、分析、设计、模拟和优化。
This simple and reliable model could be used to predict, analyze, design, simulate and optimize the process of extracting natural products with supercritical fluid.
运用该模型的模拟解，进行地下水动态观测网优化设计。
The simulation solution of the model is applied to optimal design of groundwater regime observation network.
计算结果与线型聚能射流的物理现象和规律相吻合，说明该计算模型和模拟方法合理、可行，可用于线型聚能切割器的优化设计。
The study indicates that the calculation model and simulation method are reasonable and feasible, so can be applied to the optimizing design for linear shaped charge cutter.
结果表明，数学模型较为准确地反映了实际情况，数值模拟结果对柴油机微粒捕集器的优化设计有参考价值。
The result indicates that the mathematic model has satisfactory accuracy, at the same time, the simulation result can be used as a reliable tool for optimized design of diesel particular filters.
使用该模型可以对聚合工艺进行设计、模拟和优化，并将有助于聚苯乙烯树脂分子设计的探索。
This model would be used in the design, simulation and optimization of the styrene polymerization process.
通过对塑件工艺分析的人工神经网络模拟，建立了可供工艺优化计算的数学模型。
And the mathematical model for the calculation of the technological process optimization was built through artificial neural net simulation of the technological analysis of the plastic part.
提出了用混沌模拟退火法估计非线性马斯京根模型参数的优化算法。
This paper presents an optimization algorithm based on chaotic simulated annealing algorithm, which is used to estimate the parameter of Nonlinear Muskingum model.
因此，试图建立一个二层次消费与投资决策优化动态规划模型，以便更好地模拟现实世界的情况。
Therefore, a two-level dynamic programming model of an investor's consumption and investment decision optimization was tried to establish, in order to better imitate the realistic world.
建立了仿真模型并进行模拟优化，最终确定了达到最佳风选效果的风速、风力倾斜角等多个参数。
The simulation model was established to precede simulation optimizations, and then the optimum data of wind speed, inclination Angle of wind and other parameters were verified.
该数学模型可以用来指导模拟移动床色谱装置的设计操作、过程优化与先进控制。
This model can facilitate the design, operation, process optimization and advanced control of a SMBC unit.
提出并建立了三类成品油调合优化问题的非线性规划模型，设计了基于模拟退火法的求解算法。
It presents and builds the non-linear planning models of three kinds of product oil blending optimizing problem, and designs the solving algorithm based on the simulated annealing method.
实证研究表明，基于优化的IS -LM - PC模型是经济分析及政策模拟的一个有力工具。
The stochastic simulations indicate that the optimizing IS-LM-PC model is a good tool for economic analysis and policy-simulation.
为此，建立了优化消毒数学模型，并采用遗传—模拟退火混合算法对其进行求解。
Therefore, the mathematic model for optimization disinfection was set up, and the hybrid genetic-simulated annealing algorithm was used for solution.
本文采用动态最优化模型，借助计算机对列车运行状态进行模拟，求出其以节能为目标的优化运行方式。
In this paper, the dynamic optimization model is established and the train running state of optimum energy consumption is simulated with the help of computer.
基于单个截齿的受力模型，对掘进机截割头钻进工况载荷进行了计算机模拟，为截割头的结构设计和参数优化提供了理论依据。
Based on the mechanical model of single bit, drilling loads on the cutting head of tunneling machine are simulated by means of computer in this paper.
借助ANSYS有限元软件建立CCGA624器件的三维条状模型，基于应变对焊柱可靠性进行优化模拟分析。
ANSYS software was employed to establish three-dimensional strip model of CCGA624 device and optimized simulation of soldered column dimension was also studied.
通过对肘杆系统工作过程的分析并利用多体系统动力学软件（ ADAMS）对模型进行了动力学模拟和优化设计。
Through the analysis of the working process of this linkage system, this paper execute the dynamic simulation and optimization of this model by using multi-body system dynamics software ADAMS.
有鉴于此，以随机模拟法为基础，建立了求解防洪发电相结合的水库群防洪库容优化模型。
To solve the problems, this paper develops an optimum model based on random simulation method for solving volume of reservoir group flood control.
模拟计算表明，优化后的模型给出的停留时间分布曲线与实验结果吻合良好。
Simulation with the optimized model showed that the calculated RTD curves coincided well with experimental data.
模型库包括预测模型、优化模型、模拟模型、评价模型四大部分，各模型又包括一系列子模型系统；
While model module comprises four parts, prediction model, optimized model, simulation model, appraisal model. Each model also includes a series of sub model system.
模型优化结果表明：在所有参与模拟的树冠生长的阶跃模型中，以幂函数模型为最优。
The optimizing model results show that the power model is the best one in all models tested.
模型优化结果表明：在所有参与模拟的树冠生长的阶跃模型中，以幂函数模型为最优。
The optimizing model results show that the power model is the best one in all models tested.
应用推荐