生产实践证明，按猛振原理设计的平振式振动机，是典型的优化振动机，可供推广使用。
The practice has showed that the flat vibration type feeder designed according to the principle is a typical optimum vibration feeder, which can be widely used in production practice.
在单材料优化振动钻削实验的基础上，进行了两种叠层材料按优化值变参数的振动钻削实验。
On the basis of optimized vibratile drilling mono -material test, the optimized value variable parameter is selected for vibratile drilling test of two kinds laminated materials.
在单材料优化振动钻削实验的基础上，进行了两种叠层材料按优化值变参数的振动钻削实验。
On the basis of optimized vibratile drilling mono-material test, the optimized value variable parameter is selected for vibratile drilling tesl of two kinds laminated materials.
因此，乐器的进化优化了它们的声学特性，且优化了乐器振动的方式，并将这些振动通过空气传到我们的耳膜。
So musical instruments evolved in ways that optimize their acoustical properties, how the instrument vibrates and sends those vibration through the air to our eardrums.
双万向轴的优化数学模型必须满足强度、刚度、振动条件、稳定性及边界条件的约束。
The optimal mathematical model of the double universal spindle must satisfy the constraints of strength, rigidity, vibration condition, stability and boundary condition.
本文概要论述了双轴惯性振动机构，两自由度动态模型的分析和优化方法。
After a brief description of the inertia vibrating mechanism with twin axles, the analysis and optimization method of dynamic model with two degrees freedom.
本文概要介绍受振动载荷作用的圆柱压缩螺旋弹簧的模糊优化设计。
This paper briefly introduces the fuzzy optimum design of the cylindrical compressed screw springs under vibrating load.
通过对其结构参数优化，使其射击频率与结构固有振动频率匹配更加合理，实现其射击的动态稳定性。
Through the structure parameter optimization, the matching between firing frequency and structure solid vibration frequency was more reasonable and the dynamic stability of firing was realized.
本文对周期波导中波传播与振动局部化的分析方法和计算结果可用于结构的优化设计。
The method and results in this paper for solving the problem of wave and vibration mode localization in periodic wave guide can be used in the optimum design of such kind of structure.
本文拟对关机过程中导叶小开度振动原因进行分析，并对机组关闭规律的优化方案及实施过程进行介绍。
The origin of the unit vibration in small guide vane opening is analyzed when the unit is closing and the optimal scheme of the unit closing law is suggested.
分别在环境温度或振动应力单独作用下，各自优化出四个应力水平。
Four stresses levers are achieved through optimizing design under surrounding temperature or vibration stress alone affected.
介绍了消减发动机管道振动的结构优化方法。
The paper deals with structural optimization for reducing vibration of engine pipeline.
在分析的基础上，提出了设计振动冲击夯时应遵循的原则和优化方法。
The design principles and optimal method for vibration-impact rammer were proposed on the base of the analysis.
实例计算表明，采用动态优化方法比采用静态优化方法，对降低万向节传动引起的传动系的振动和噪声将会有更好的效果。
Calculations of some examples show that the dynamic optimal design is better than the conventional one for reducing vibration and noise caused by universal joint propeller shafts.
介绍了利用有限元分析软件ANSYS，对压电智能结构的主动振动控制系统进行优化设计的方法。
A method of optimum design on active vibration control system of piezoelectric smart structure using finite element analysis software ANSYS was introduced.
通过对车架有限元模型进行动力优化分析，介绍了轻型货车横向振动的控制方法。
With the dynamic optimum analysis of the frame FEM model, a control technique of the lateral vibration is introduced.
振动模态分析是立式电机优化设计的重要步骤。
The analysis of vibration mode is an important process during the optimizing design of vertical motor.
优化研究了新型堑沟受矿振动助流底部结构。
Optimized and studied the new bottom structure with ore gathering by trench and vibration flow-aiding.
实验表明，通过切削条件和振动参数的优化组合能够得到满意的纤维尺寸。
It shows that the satisfactory equivalent diameter of fibre can be obtained through the optimization of the above parameters and conditions.
周期运动的稳定性与分叉研究可以为冲击振动落砂机的动力学优化设计提供理论依据。
The system parameters of shaker may be optimized by studying of stability and bifurcation of periodic impact motion of shaker.
运用ADAMS软件进行了动力总成悬置系统的模型仿真验证，通过振动模态分析的方法研究了优化前后悬置系统的隔振性能。
Having set up the dynamic model in ADAMS, this paper uses the method of vibration mode analysis to study the isolating ability of the mounting system.
作动器优化布置是振动主动控制中的一个重要问题。
Actuator optimal placement is an important problem of active vibration control.
介绍了两种多重调谐质量阻尼器（MTMD）的参数优化公式，并采用两种方法对车桥耦合振动中桥梁的竖向振动进行了控制。
Two parameter optimization formulas of multiple tuned mass dampers(MTMD)was introduced. Vertical vibration of bridge was controlled in the train-bridge coupling vibration by the two methods.
提出并设计了一种基于粒子群优化算法的振动信号的自适应滤波模型。该滤波模型在计算机仿真测试中，获得了很高的效率和良好的结果。
A new adaptive filtering model based on particle swarm optimization (PSO) algorithm is proposed and designed. It is proved to be efficient and effective in the computer simulation example test.
对切削振动信号的分析是研究切削优化方案的重要手段。
The analysis of cutting vibration is one of the important methods of optimization in cutting research.
以振动输送机械能量效率为目标函数，探讨单质体惯性式振动输送机械的优化设计方法。
This paper discussed the optimization design of the inertial vibrating conveyer under the best energy efficiency of conveyer as its objective function.
本文针对随机参数压电智能桁架结构开展了结构动力分析、主动杆优化配置和结构振动主动控制研究。
In this paper, the research of structural dynamic analysis, the optimization of active bars placement and the active vibration control for piezoelectric structure are studied.
本文利用微机通过梯度法初步实现对汽车振动参数的优化设计。
An attempt has been made to apply a gradient method for optimizing motor cars oscillatory parameter using microcomputers.
通过对直线运动平台的有限元分析和动静态频率仿真，确定了刀架振动的原因，并优化了刀架的结构。
By using finite element method (FEM) and by simulating the dynamic and static frequency, the reasons of vibration are clear and then the servo structure is optimized.
通过对直线运动平台的有限元分析和动静态频率仿真，确定了刀架振动的原因，并优化了刀架的结构。
By using finite element method (FEM) and by simulating the dynamic and static frequency, the reasons of vibration are clear and then the servo structure is optimized.
应用推荐