介绍了利用计算机与PLC进行串行口异步通信方法开发的PLC仿真调试系统，并对计算机与PLC通信的实现进行了论述。
The emulated debugging system of PLC developed by means of serial communication between computer and PLC is presented and such communication technique is discussed.
描述供机载雷达应用软件调试、测试用的软件仿真系统。
This paper describes the simulation system for debugging and testing of air borne radar application software.
在使用DeviceDeveloper调试Nokia 6310i仿真器中的MIDlet 时，有时候不能在 Nokia 仿真器与 Device Developer 调试系统之间建立调试连接。
Sometimes, when using Device Developer to debug a MIDlet in the Nokia 6310i Emulator, a debug connection between the Nokia emulator and the Device Developer debugging system cannot be established.
潜艇分布式作战仿真系统是为作战系统开发、调试及验证提供较真实作战环境的大规模仿真系统。
Submarine distributed combat simulation system is a type of large scale system, which providing near real combat environment for the development, debugging and validation of combat system.
系统的CCS软件在XDS510仿真器和调试器配合下工作。
The CCS software of system was operated under the cooperation of XDS510 simulator and debugger.
设计嵌入式仿真平台，可以大大缩短开发嵌入式软硬件的周期，使得调试操作系统级的代码更加方便。
Designing embedded simulation platform can shorten embedded software and hardware development cycle greatly and make debugging codes of operating system level more conveniently.
工控应用程序的完善设计是保证计算机控制系统的性能与可靠性的一个重要措施，而仿真调试是使应用程序完善化的一个重要环节。
The simulation debugging is an important process in the perfect design of the application programs for computer control systems in order to ensure system performance and reliability.
最后对系统进行调试及仿真，实验结果表明该系统运行稳定、控制效果好、性价比高，具有良好的市场前景。
Finally, debugging and simulation systems, experimental results show that the system stability, control, and cost-effective, have good market prospects.
在MATLAB6.5环境下，通过编写和调试m文件，对电弧炉电极调节系统PD控制器进行设计与仿真。
Afterwards, the PD-controller of electrode regulator system of electric arc furnace is designed and simulated on MATLAB6.5 by compiling and debugging M-files.
着重介绍了该仿真系统的总体结构与功能设计，软件编程与调试。
The overall structure, function design, program composition and debugging of the simulation system are emphatically introduced in the paper.
数据采集系统触发电路、随机采样短时间产生电路、存储器地址计数器电路等相关控制电路的设计、仿真和调试；
The circuits revelent to data acquisition system such as trigger circuit, the circuit of short time generator in random sampling etc, are designed, simulated and adjusted.
在该软件平台上可以方便地定义、调试和仿真一个复杂的模糊控制系统。
This software platform can define, debug and emulate a complicated fuzzy logic control system easily.
为了降低现场调试的成本和风险，如何在实验室中建立工程化的磨矿过程控制仿真系统成为具有重要实用价值的研究课题。
In order to decrease the cost and risk of practical debugging, how to establish a control simulation system of grinding process for engineering is an issue which has greatly practical value.
采用计算机对卷取张力控制系统仿真，可以快速获取系统设计参数和这一参数时的系统性能，使现场调试变得方便快捷。
For simulation of winding tension control system using computer, the parameters about system design and the system performance with these parameters can be quickly obtained.
并且进行了仿真，结果表明该方法的合理性、有效性，为实际电机控制系统的设计和调试提供了新的思路。
The simulation result proves that this method is reasonable and deficient and offers a new thought way for designing and debugging actual control system of motor.
对消磁系统S矩阵测量过程和分析方法进行了仿真研究，调试了S矩阵专用测量程序。
The S matrix measurement method is studied by this simulation process, and a special software for S matrix measuring is also debugged with this process.
为了调试和验证这种新的水下导航系统，开发了水下运载体导航系统仿真平台。
In order to debug and verify this underwater navigation system, the simulation platform of navigation system for underwater vehicle is developed.
该系统可作为计算机控制系统教学的演示装置，亦可进行系统硬、软件设计、调试及控制算法的仿真研究。
The device can be used as a demonstration of computer control system as well as an emulation research for both the software and hardware designing and debugging of the control algorithm.
对诊断系统的调试结果表明：基于虚拟dcs的仿真系统设计的故障诊断系统实现了火电厂的实时故障诊断与事故预报。
The test results indicate that the fault diagnosis system designed with the virtual DCS-based simulation system realizes the real-time fault diagnosis and accident prediction of the power plant.
片上的在电路仿真器(ice)模块，对于支持DSP系统的实时仿真和调试，加快系统开发进程是至关重要的。
On chip in Circuit Emulator (ICE) module is most important for debugging and emulating actual DSP systems. It is very effective to accelerate the process of DSP systems development.
实验证明，单片机虚拟仿真实验简化了程序在目标硬件上的调试工作，有利于缩短系统开发周期，降低成本。
The result proves that the work load of program debugging in objective hardware was reduced, development process is accelerated and the cost is lowed by micro-controller virtual simulation experiment.
根据仿真实验得到的控制规律和提出的双反馈控制原理进行了系统的软件设计，并对设计装置进行了实验室功能调试。
On the basis of introduction of the control rules, the paper makes the software design and makes the experiment function debugging.
通过系统半实物仿真调试，验证了系统的功能，证明了可编程序控制器可应用于控制保护系统中。
The function of this system is tested and verified by simulation and it can be proved that the programmable controller could be used in the control and protect system.
设计根据系统，开发控制程序并在此平台上进行调试仿真。
Design the system to develop control procedures and, in this simulation platform debugging.
此外，本文还利用ADAMS环境中的控制系统设计要素对该机器人进行了基于试行错误方法的关节控制器设计和调试，并进行了仿真。
Based on the implementation wrong method, the paper designs and debugs the joints'controllers by use of the control system design elements in the software ADAMS, and simulation is implemented.
系统完成后，经联机仿真调试和实际通信结果表明：性能良好，达到了预定的设计指标要求。
The result is verified to attain the index requirements by debugging and practical operating, after system design has finished.
本文完成了系统硬件平台设计和软、硬件调试工作，实现了算法的仿真及应用。
In this paper, we complete the system design, the debugging of hardware and software, the implementation and application of algorithms.
在FPGA系统和ARM系统上分别下载实现DDS信号发生器，给出仿真结果和下载调试结果，并对结果进行深入分析。
The DDS signal generators are designed on the FPGA system and ARM system, the simulation results and download results are given and analysed in-depth.
最后对整个系统进行了加工、调试和测试，最终实测结果与仿真结果吻合的较好，满足了各项技术指标的要求。
Ultimately, convenient for the signal surveillance, a coaxial directional coupler was designed. Finally, the result of the simulation and experimentation were matched very well.
最后对整个系统进行了加工、调试和测试，最终实测结果与仿真结果吻合的较好，满足了各项技术指标的要求。
Ultimately, convenient for the signal surveillance, a coaxial directional coupler was designed. Finally, the result of the simulation and experimentation were matched very well.
应用推荐