目前，国内客车侧翻安全性仿真研究较少，尤其是对侧翻安全性仿真评价方法和结构安全性的研究才刚刚开始。
The coach rollover safety simulation less in China now, especially for the evaluation methods of rollover safety simulation and the body framework safety simulation study has just begun.
将重调度策略划分为半导体生产线、设备组和设备重调度层次，利用仿真评价确定优化的重调度策略，并获得样本数据。
The rescheduling strategies are divided into line layer, machine group layer and machine layer. The samples for FNN are setup by simulation evaluation.
该评价方法包括自行模式和互动模式两种评价方式，自行模式仿真评价方法的基础是利用驾驶员模糊车速控制模型获得的运行车速；
This evaluation method includes auto mode and interaction mode. The base of auto mode is the operating speed obtained by driver's fuzzy control model;
将基于人体测量参数的数字人体模型应用于载人航天器设计方案的仿真评价对发现设计缺陷，提高整个系统的安全可靠性具有重要意义。
It is very important to find design defects and to improve the system reliability when digital human models based on anthropometric data are applied in simulation of manned spacecraft design scheme.
利用本文提出的控制模型设计了一个实例的信号控制方案，并通过V ISS IM仿真评价了该信号控制方案，验证了本文提出的控制方法的有效性。
A signal control plan is designed for an illustration according to the model and is evaluated by VISSIM. The feasibility and the validity of ther...
目前该评分软件已成功地应用于制氢装置停工过程的计算机仿真培训中，并获得了良好的评价。
At present, the scoring software has been successfully applied in the computer simulation training for the hydrogen producing unit shutdown and has won good appraisal.
以保定市各县供电企业专家评价数据作为BP神经网络的训练样本，进行仿真试验，得到了满意的结果。
Simulation tests were carried out with evaluation data given by experts from power supply enterprises in Baoding taken as training samples for BP neural network, and the results are good.
网络化作战的时代特征迫切需要新的仿真模型和评价方法，以预测信息优势对作战效果的影响。
The development character of network centric operation needs new simulation models and evaluation methods, to forecast the effect of manoeuver based on information superiority.
在自主研发的面向道路交通的高级驾驶模拟器(KMRTS)的应用研究中，动态交通流仿真是影响交通评价实验结果的一个重要因素。
The dynamic traffic flow simulation is an important factor that influences the experiment results for traffic evaluation in the applied research on the full size Driving Simulator (KMRTS).
分析了采用输入、输出虚队列的输入缓存式以太网交换机的运行机制，并用计算机仿真的方法对其进行模拟、评价。
The structure and the operation mechanism for the input-buffered Ethernet switch with input and output virtual queues is analyzed. The model is simulated and evaluated by computer simulation.
为了验证算法的合理性和有效性，在第4章中对此算法进行了大量的仿真实验来评价算法多方面的性能。
In order to verify the rationality and validity of the algorithm, in chapter 4 a large amount of simulation experiments have been made to appraise the performance of algorithms.
试验结果表明，该方法可以有效地应用于虚拟环境中汽车驾驶空间的人机工程仿真与评价，支持产品开发设计。
Experimental results show that the presented approach works well for ergonomic simulation and assessment of driving workplace in virtual environment and product design.
并提出使用相关系数作为算法最优参数选取和性能评价的标准，计算机仿真实验结果证明了该方法的可行性。
The correlation coefficient is proposed as a criterion to determine the optimal parameter, and evaluate the performance of algorithms. The simulation results demonstrates its possibility.
仿真为评价实际使用性能提供了预先估计，冗余阵元使得阵形设计具有灵活性，加权平均可改善跟踪质量。
Simulations provide pre-estimation for evaluation of actual performance, redundant elements make the array design flexible, and the weighted average improves the tracking quality.
理论分析与荷载试验结果的一致性表明采用有限元仿真分析方法能够对桥梁加固效果进行准确的评价。
The result uniformity of theory and test illustrates the simulation analysis method with finite element can be used to evaluate the reinforcement effect of bridge well and truly.
研究了在数字最优预见控制中，输入权重对评价函数的影响，给出了两者的函数关系，最后进行了仿真验证。
The influence of input weighting on evaluation function in digital optimal predictive control is investigated. Its function relation derived has been proven by simulation.
然而，混合动力汽车性能，特别是动力性和经济性的评价与改进，不但需要理论仿真，更需要大量的试验分析。
However, evaluating and improving HEV performances, especially dynamic and economical performance, not only needs theoretic simulation but also needs vast test datum analyzing.
通过对多种启发式调度规则特性的全面仿真研究与分析，得出了各种规则与生产管理评价指标的影响度关系。
Through full simulation, studying and analysis of the characteristics of simple heuristic scheduling rules, I make sure each rule's influence degree for different evaluation measures.
仿真试验说明：改进后的权重插值算法优于原先的算法，最后用平均梯度进行了性能评价。
The simulation results show that the improved power interpolation is better than the original algorithms, and the performance is evaluated with the mean grade finally.
本论文的主要工作即着重于系统芯片中片上总线结构的性能评价研究，包括总线结构的建模、系统仿真环境的建立以及性能评价的方法。
This paper focuses on performance estimation of the embedded microprocessor based on the on-chip bus, including on-chip bus modeling, high-level simulation environment building and their combination.
最后运用VISSIM仿真软件，对该设计方案的效果进行检验和评价，结果证明该绿渡系统的可行性。
Lastly the VISSIM simulation software is used to evaluate the function of the scheme, and the conclusion that this green wave system is feasible and superior can be drawn.
然后利用ADAMS对虚拟样机进行各项机动性能的仿真分析，验证机动性能的影响因素和评价指标。
Then carries on each maneuvering performance using ADAMS to the dummy specimen the simulation analysis, the confirmation maneuvering performance influence factor and the appraisal target.
提出一个面向通信系统性能评价的语音库研制方案，并给出其基于MATLAB仿真的实现途径。
This paper presents a development scheme for speech base aiming at the performance assessment communication system, and also the way of how to realize it by simulation based on MATLAB platform.
目前，微观交通仿真模型已被广泛应用于城市快速路交通运行评价与管理策略研究中。
At present, the microscopic traffic simulation model has been widely used in the evaluation of traffic operations and management alternatives for urban expressways.
现有的汽车平顺性的仿真分析评价只考虑垂向振动对人体的影响，难以准确全面地反映传入人体的振动情况。
Most of the evaluations to the vibration ride comfort of the vehicle only consider vertical vibration presently, and could not show the vibration from vehicle to body completely.
信息网络设计和信息网络性能评价是网络研究的重要领域，而网络仿真技术是开展网络研究的重要方法。
Information network Design and network Performance Evaluation are critical network research areas, while network simulation is an important method to carry out these research activities.
交通信息获取、交通状况分析与评价是微观仿真系统实现交通模拟及方案论证功能所不可缺少的组成部分。
The traffic information obtaining, traffic status analysis and estimation are indispensable components to the micro-simulation systems for their traffic simulating and scheme reasoning functions.
数值仿真技术已成为挤压锻造模具设计中的重要评价手段，有助于设计人员更好的理解设计空间。
Numerical simulation technique has become the important verifying tools in extrusion and forging die shape design. It helps designers to know the design parameters space better.
阐述了手扶机动插秧机液压仿形系统的功能、特点、设计依据、动态分析、数字仿真及评价指标。
The functions, distinguishing features, dynamic analysis and applications of digital stimulation of hydraulic position control system for a walking type transplanter are discussed.
阐述了手扶机动插秧机液压仿形系统的功能、特点、设计依据、动态分析、数字仿真及评价指标。
The functions, distinguishing features, dynamic analysis and applications of digital stimulation of hydraulic position control system for a walking type transplanter are discussed.
应用推荐