在此基础上对计算进行简化,减少计算量,并利用机械系统仿真分析软件ADAMS进行仿真分析。
The method not only simplifies the solving process, but also reduces the computations, and using the mechanical system simulation program - ADAMS to simulate it.
利用多体动力学仿真分析软件ADAMS,对断路器机构系统进行动态仿真建模与分析,获得其分闸过程的动态特性。
The model of ACB mechanisms for dynamic simulation was built with multi-body dynamics simulation program ADAMS, and the dynamic characteristics were obtained by simulation analysis.
借助机械系统动力学仿真分析软件ADAMS,探讨了在计算力矩、模糊变结构控制策略和所遴选的轨迹规划方法下,机械手的控制效果。
By using the simulation software ADAMS, the performance of manipulator which employing the designed control algorithms and the selected path planning method has been discussed.
在研究中,他们开始了全面应用故障仿真系统进行试验,并自编软件对大量仿真数据进行统计分析。
In their research they started to apply the fault simulation system for test in an all-round way and created their own software to analyze the enormous simulation data.
详细地介绍了系统的硬件设计和软件设计,并在仿真的基础上通过对方波信号的试验分析,验证了系统设计的可行性和正确性。
Hardware and software designs are amply introduced in the paper and through the test analysis using square wave 'the feasibility and validity of this design are affirmed.
在此基础上采用有限元分析软件对永磁材料的磁导率为非线性时的一对永磁齿轮传动磁场进行了仿真分析,并对结果进行了分析总结。
On this basis, as the permeability of permanent magnetism material is non-linear, two gear wheel's magnetic field is simulated with finite element software, and analysis of the result is carried on.
本课题开发的某雷达仿真试验数据录取与分析系统软件可以根据试验任务的不同,扩充采集信号类型,扩充试验方法,满足了用户的需求。
The software of data acquisition and analysis on radar simulation testing system in this subject can extend the signal types and the testing methods, and meet the requirement of the users.
该方案的基本思想是建立一个适用于工程分析和仿真培训装置开发的综合软件平台。
The basic idea of this plan is to establish a comprehensive (multi-funtional) software platform for engineering analysis and developing simulation test instruments.
最后,利用Matlab软件的作图功能,从自相关函数、频谱函数和模糊函数三个方面对M波形的性能进行了仿真分析。
At last, making use of the plotting function of MATLAB, the paper carries out simulation analysis from three aspects: auto-correlation function, spectrum and fuzzy function.
同时,结合宏观预测结果,应用VISSIM微观仿真软件分析关键节点的交通运行状况,提出世博会园区游客步行交通组织建议。
At the same time, use VISSIM, the microscopic traffic simulation software, to analyze traffic running condition of those points, and put forward the advices of traffic organization in the arena.
在分析NS 2网络仿真软件的基础上,构建了计算机网络辅助教学平台,归纳了计算机网络课程涉及的网络协议。
Following the analysis of the software of NS2 network simulation, the aided teaching system of computer networks was designed, the network protocol in the computer networks curriculum was summarized.
在单片机用户系统的设计中,必须对硬件和软件进行具体仿真。通过分析单片机系统的晶振电路、上电总清和负载能力来解决实际遇到的问题。
This paper introduces simulation methods of MCU hardware and software systems and help to solve actual problems by analyzing crystal circuit, electriferous reset and load capacity of the systems.
运用仿真软件分析了跟踪式光伏阵列运行特性、跟踪闭锁现象及步进跟踪控制方式对光伏阵列工作特性的影响。
It USES the simulation software to analyze the characteristic of the tracking photovoltaic (p v) array and the influence to the PV array by the the tracker locking and step-track approach.
该软件包具有模型变换、系统分析、极点配置控制、最优控制、次优控制、LQG、二次型权矩阵早优和系统仿真等功能。
The package has the functions of modelling, system analysis, pole-placement control, optimal control, suboptimal control, LQG, selecting quadratic weighing matrices and system simulation etc.
本文首先分析了该变换器的工作原理和电路特性,使用PSPICE软件对主电路进行了仿真分析。
The thesis firstly analyzes the converter principle of operation and the circuit characteristic, used the PSPICE software to carry on the simulation analysis to the main circuit.
该系统采用主动工作方式,本文系统地研究了在多途信道中对声学信号进行处理的理论研究和仿真分析及工程软件设计。
The theoretical and simulation analysis about acoustic signal processing in multi-path channel and the engineering software design are given in the dissertation.
通过对丝杠磨削过程中丝杠受热变形的规律进行分析,运用仿真软件进行仿真,计算预测丝杠磨削过程中的变形量。
The screw deformation during grinding is calculated, predicted and simulated by a simulation software, based on analyzing the regularity of thermal deformation.
设计过程中,我们选用精确的器件模型,充分地发挥了微波分析仿真软件的强大功能,大大提高了开发效率。
In the design process, we choose the precise component model, so the function of the simulation software is fully exerted and the research efficiency is increased.
对纯水液压锥阀阀口流场气穴进行了数学建模,并用FLUENT软件进行了仿真分析,从而得到气穴发生的程度与流场压力分布之间的关系。
The flow field cavitation inside the water hydraulic poppet valve was modeled and analyzed by using the software of FLUENT, and the relation between the cavitation and the pressure was investigated.
研究表明,试验结果和仿真具有较好的一致性,仿真软件可以预测和分析汽车的平顺性。
According to the study, the test result and result of simulation fit to each other quite well, the software of simulation can be used in forecasting and analysing the ride comfort of vehicle.
详细叙述了ADAMS软件的多体动力学分析原理,对希望从底层开发自主知识产权虚拟样机仿真软件的人员有一定的参考价值。
Multi-body-dynamics theory about ADAMS software is discussed in detail, which may be helpful to somebody interesting in developing our VP software owned knowledge patent.
利用多体动力学方法建立了基于ADAMS软件平台的整车刚柔耦合多体系统操纵动力学仿真分析模型。
Based on multibody system dynamics method and ADAMS software platform, a rigid-flexible coupling multi-body model is built for vehicle dynamics simulation.
本文通过理论分析和软件数值仿真,分析了蝶形结构、折合偶极子结构以及双馈方式实现方向图可重构的可行性。
Through theoretical analysis and numerical simulation, the pattern reconfigurable feasibility of the structures of butterfly, folded dipole and double-feed is analyzed.
本文论述了EWB仿真软件的优点,分析了EWB在《信号与线性系统》课程中的应用及其对教学方法的影响。
The article discusses advantages of EWB and analyzes EWB applied to Signal and Linearity System. At the same time, EWB has influenced upon teaching means greatly.
本文采用面向对象的设计方法,对列车自动驾驶仿真平台的分析与设计进行了详细论述,并完成了系统仿真软件的设计。
This paper illustrates the process of analysis and design of automatic train operation by use of object-oriented method, and completes the software design of this simulation system.
在分析卫星侦察通信环境的基础上,开发了卫星侦察通信环境仿真系统,给出了环境仿真软件流程,并分析了软件实现的关键技术。
Based on the analysis of communication environment in satellite reconnaissance, the simulation system of communication environment in satellite reconnaissance is developed.
在嵌入式系统组成特性和嵌入式软件测试抽象分析基础上,提出了一种基于故障注入的嵌入式软件仿真测试方法。
Based on abstract analysis of the composing of embedded system and testing of embedded software, a method of embedded software simulation testing based on fault injection is presented.
建模所得的实体模型直接用于运动仿真分析和有限元分析,缩短了设计所需的时间,减少了软件间的数据交换。
Entity model from modeling can be directly used in motion simulation analysis and finite element analysis, which shortens the design time and reduces the data exchange between softwares.
对相同的路口进行定时控制设计。借助VISSIM仿真软件,分别对其定时控制方式和感应控制方式进行仿真和分析。
Carries on timing control at the same crossings, and based on the VISSIM emulational software, simulates and analyzes the way of timing control and actuated control.
本文介绍了自行开发的抗干扰卫星通信系统仿真软件的模块结构、关键技术及应用于分析验证一种新型抗干扰技术的例子。
This paper presents the modular structure, key techniques and an application example of a software package developed by ourselves for simulations of anti-jamming satellite communications systems.
应用推荐