完成整个单芯片交流伺服控制系统尚需进行进一步的研究。
If the whole single ac servo control system is accomplish, farther research is must.
本课题研究的主要内容是AMK交流伺服控制系统在烟机卷接机组中的应用。
This subject mainly researches the application of the AMK AC servo system in the fitter tip attachment assembly.
本课题的目的是研究以圆网印花为工程背景的基于CAN总线的智能双轴交流伺服控制系统。
The purpose of this paper is researching intelligent two-axis AC servo control system based on CAN BUS in the background of rotary scream printing .
交流伺服控制系统的组成本文所设计的交流伺服控制系统是用于数控机床上的进给驱动系统。
This paper introduces an AC servo control system based on the design of CPLD and analogue controller integration.
目前，交流伺服控制系统已经广泛应用于数控机床、轧钢设备、造纸设备、纺织设备等自动化领域。
At present, ac servo control system has widely applied in automation area, for example NC machine, steel rolling equipment, paper making equipment and weave machine etc.
此泛用型交流伺服控制架构主要包含三个控制迴路：电流控制迴路、解耦控制迴路与伺服控制迴路。
The proposed UAC scheme consists of three main control loops: current control, decoupling control, and servo control.
反推控制是一种新颖的非线性控制策略，算法简单，易于工程实现，是目前交流伺服控制研究热点之一。
Backstepping control called a novel nonlinear strategy is one of the high focus research in ac servo drive for simple arithmetic and facility project implementation.
针对该设备负载大、运行情况复杂等特点，主轴采用了交流变频调速矢量控制技术，小车采用了先进的交流伺服控制技术。
Against the heavy equipment load and complex operations characteristic, the spindle used vector control technology of ac frequency speed control; the car used advanced ac servo control technology.
针对该设备负载大、运行情况复杂等特点，主轴采用了交流变频调速矢量控制技术，小车采用了先进的交流伺服控制技术。
For the load of equipment, such as the operation of complex features, using the main exchange Frequency vector control technology, using advanced car AC servo control technology.
在济钢ASP1700薄板坯连铸连轧项目中，连铸机结晶器调宽系统采用了新型全数字交流伺服控制系统，代表当今世界最先进控制水平。
In the project of ASP1700 thin slab continuous casting and rolling, the system of mould width adjust in the continuous casting is equipped with the new digital alternating servo control system.
本文提出了一种基于模糊神经变结构控制的交流伺服系统。
This paper presents an AC servo system based on fuzzy neural variable structure control.
文章提出了一种适用于交流伺服系统的鲁棒滑模控制器的动态设计方法。
A dynamic design method of robust sliding mode controller in AC servo system is proposed in the paper.
采用交流伺服电机作为驱动器件，可以和直流伺服电机一样构成高精度，高性能的半闭环或闭环控制系统。
Adopting ac servo motor as the driving device, can the dc servo motor and a high precision, high performance as the half closed loop or closed loop control system.
目前常用的伺服电机是交流伺服电机，在电机的轴端装有光电编码器，通过检测转子角度用以变频控制。
Now commonly used servo motor is ac servo motor, the axial end in motor with photoelectric encoder, by examining the rotor Angle to frequency conversion control.
实验结果表明基于模糊控制的交流伺服系统具有较快的响应速度、较高的稳态精度和较强的鲁棒性。
The results of experiments show that the ac servo system based on fuzzy control has quick response speed, high steady accuracy and good robustness.
实验结果表明，基于模糊pid控制的交流伺服系统具有响应速度快、稳态精度高和鲁棒性强等特点。
The results of experiments show that ac servo system based on fuzzy PID control has quick response speed, high steady accuracy and good robustness.
实验结果表明，基于积分分离PID控制的交流伺服系统具有响应速度快、稳态精度高等特点。
The results of experiments show that AC servo system based on integral partition PID control has quick response speed and h.
介绍自行研制的基于80C196KC单片机的交流伺服电机控制卡的硬件设计及其软件实现。
The paper introduces the hardware and software design of an AC servo motor control card based on 80C196KC.
交流位置伺服系统广泛应用于工业控制系统中。
The AC position servo systems are extensively used in the industrial control systems.
采用全数字技术实现对交流永磁同步电机的伺服控制，并将此项技术应用于工业缝纫机领域。
The full digital technique was adopted to realize the servo control of the ac permanent-magnet synchronous (motor.) the technology was applied in the industrial sewing machine.
针对永磁同步电机交流伺服系统，提出了串级滑模控制方案。
A cascaded slide mode control scheme is designed for permanent magnetic synchronous machine ac servo system.
介绍了基于TMS320F2812交流伺服电机控制系统的整体方案设计。
The whole project design of the AC servo motor control system based on TMS320F2812 is introduced.
实验结果表明，基于对角递归神经网络整定的PID控制的交流伺服系统具有响应速度快、稳态精度高和鲁棒性强等特点。
The results of experiments show that AC servo system based on DRNN PID control has quick response speed, high steady accuracy and good robustness.
重点介绍了永磁交流伺服系统的控制策略，位置检测和辨识、主电路和驱动技术等关键技术。
This article introduced emphatically the control strategy, position detection and identification, drive technique as well as main circuit of permanent magnet Ac servo system.
下位TMSF2812型DSP芯片则主要用于实现复杂的插补及控制算法，并以西门子伺服驱动放大器和交流伺服电机作为驱动单元，对改造后的数控铣床各轴进行位置控制。
The lower DSP (TMS F2812) is used to realize the interpolation and control of three axes for the retrofitted CNC milling machine equipped with SIEMENS servo drive amplifiers and ac servo motors.
数字化的交流伺服系统是靠软件完成控制计算来支持闭环控制的，它的控制计算程序直接决定了系统的控制质量。
For digitized AC servo system, it needs software to support it's closed-loop control. Its control quality is decided by the program of control computation directly.
实验表明：双闭环的永磁数字交流伺服系统拥有很高的速度和位置控制性能。
Experiments show that the two-loop Servo System has good performances in speed and position control.
实验表明：双闭环的永磁数字交流伺服系统拥有很高的速度和位置控制性能。
Experiments show that the two-loop Servo System has good performances in speed and position control.
应用推荐