介绍了氯化亚铜的生产方法及技术进展情况,对其需求情况进行了讨论。
The production method and technology progress status of cuprous chloride has been introduced, as well as it's demand status has been discussed.
介绍了以铜灰为原料直接生产氯化亚铜的方法,讨论了工艺条件对产品收率的影响。
By use of copper ash as raw material, a new method for direct production of cuprous chloride is introduced. The process conditions affecting on recovery of cuprous chloride are discussed.
研究了相转移催化剂(PTC)在液固相体系中,转移萃取非解离型中性分子氰化亚铜的过租。
Transfer of non dissociated neutral molecule CuCN in solid-liquid system by phase transfer catalysts is investigated.
还有一个赞比亚铜矿的事例。
这可能会损害微妙红色氧化亚铜层,我们需要使太阳能电池的工作。
This might damage the delicate red cuprous oxide layer we need to make to solar cell work.
我们的太阳能电池是由氧化亚铜而不是硅。
Our solar cell is made from cuprous oxide instead of silicon.
介绍了以丙烯酸酯共聚物为分散介质、以碘化亚铜为分散相的导电涂料的制备方法。
A method for making conductive coating comprising acrylic copolymer as dispersion medium and cuprous iOdide as dispersion phase is reported.
硫氰酸实验研究了利用硫氰酸钾生产废液中的硫氰酸根制备硫氰酸亚铜过程中合成废液及洗涤废水无害化处理技术。
The treatment process of liquid waste in synthesis of cuprous thiocyanate by use of sulfocyanide ion existed in the liquid waste of potassium rhodanate was investigated.
附上两个阿利·盖特剪辑线索,一个新的铜板,其中的氧化亚铜涂层板。
Attach the two alligator clip leads, one to the new copper plate, and one to the cuprous oxide coated plate.
乙炔亚铜是黄褐色的红棕色的粉末,不溶于水和大多数有机溶剂。
Cuprous acetylide takes the form of a russet or reddish-brown powder, insoluble in water and in the majority of organic solvents.
自由电子进入盐水,然后把干净的铜板,到线,通过米,并回到氧化亚铜板。
The free electrons move into the saltwater, then into the clean copper plate, into the wire, through the meter, and back to the cuprous oxide plate.
提出了拟一元模型,把四氯化亚铜铝甲苯液作为一个虚拟的纯物质。
The quasi-unitary model was presented, and the cuprous aluminium tetrachloride-toluene solution was defined as a quasi-pure substance by this model.
本文介绍了用溴化亚铜激光器利用光脉冲法来测定光速的实验及其设计思想。
This paper presents the experiment and design thinking for measuring velocity of light by using a copper bromide laser.
研究了以湿法回收利用废铜催化剂中的铜、锌制取氧化亚铜和氧化锌的原理以及最佳工艺条件。
Cuprous oxide and zinc oxide can be recovered from waste copper catalyst by a wet process. The principle and the optimum conditions of the process have been studied.
在赞比亚铜矿带中国人经营的矿上,工人们必须工作两年才能得到安全帽。
At Chinese-run mines in Zambia's copper belt they must work for two years before they get safety helmets.
分析和测量了ZQM1—1000/10氢闸流管的氢发生器电压对溴化亚铜激光器激光平均功率的影响。
The influence of ZQM1 - 1000/10 thyratron reservoir voltage on CuBr laser output power was measured and analysed.
介绍了利用溴化亚铜激光器输出的脉冲激光通过光纤延时的方法测出光波波包中心所通过的光程及所需时间,从而实现测定光速的实验开设及其设计思想。
By using a fiber to postpone light pulse output from CuBr laser, the light speed can be determined by the time that light wave packet center traversed.
用常压分步消化-碘量法测定防污漆中铜的含量,对氧化亚铜试剂和防污漆的最佳实验条件进行了总结。
The content of Tin and Copper in antifouling paints by microwave digestion-EDTA method has been determined and the optimum experimental condition has also been studied.
结果表明,氧含量超标,存在大量的脆性相氧化亚铜,且材料内部仍留有部分残余应力,是失效的主要原因。
Results showed that the fracture was caused by higher content of O2, a large amount of Cu2O and residual stress.
结果表明,氧含量超标,存在大量的脆性相氧化亚铜,且材料内部仍留有部分残余应力,是失效的主要原因。
Results showed that the fracture was caused by higher content of O2, a large amount of Cu2O and residual stress.
应用推荐