这款保湿乳液的配方含有有机椰子，琉璃苣油和亚麻籽油，可修复和滋养水疗肌肤。
This daily moisture lotion is formulated with organic Coconut, Borage and Flax oils to repair and nourish for therapeutic hydration.
由于采用新型乳化剂和其它助剂，对提高聚醋酸乙烯乳液的性能产生了明显的作用。
Thanks to the use of new emulsifying agent and other auxiliary agents, obvious effects were exerted for improving properties of polyvinyl acetate emulsion.
两者都是乳液——一种液体的微小球体均匀地分布在另一种液体中。
Both are emulsions—tiny globules of one liquid evenly distributed throughout another.
若皮肤极为柔嫩，可在沐浴前涂上温和的护肤乳液。
For super-soft skin, lather on a light body lotion before you bathe.
采用单因素法探讨了影响D4-丙烯酸酯乳液预乳液稳定性的因素。
The influence factors on the pre-emulsion stabilization of D4-propenoic acid ester are discussed by using the mono-factor method.
通过多步复合乳液聚合方法合成了一种具有核壳结构的刚性聚合物微球。
A kind of rigid polymer microsphere with core shell structure was synthesized by multi step composite emulsion polymerization technique.
生产方法是乳液聚合，和苯乙烯-丁二烯橡胶的生产过程相似，得到“热”橡胶和“冷”橡胶。
Produced by emulsion polymerization in a similar way to styrene-butadiene rubber processes, yielding both "hot" and "cold" rubbers.
并提出了该体系进行阴离子乳液聚合反应可能的反应历程。
The possible polymerization mechanism causing anion emulsion polymerization by this system is raised.
喜爱纯净，散发淡淡香味的天然妊娠纹按摩油但是更喜欢富含营养，润肤乳液？
Love the idea of pure, delicately scented Natural Stretch Oil but prefer a rich, emollient lotion?
介绍一种将聚醋酸乙烯乳液做为母液生产粘合剂的方法。
This paper introduces a new method to produce adhesives by use polyvinyl acetate emulsion as parent liquor.
最后简要介绍反相乳液聚合产品的应用领域。
Application field for products prepared by inverse emulsion polymerization was presented at last.
在阵雨应用沭浴油或一个润肤乳液到所有的皮肤如上述的之后。
After the shower apply a bath oil or a moisturizer to all of the skin as above.
探讨了各种合成因素对乳液聚合反应的影响，并对复合胶乳粒径影响因素进行了考察。
The influence of synthetic factors on the emulsion polymerization and the complex latex size were discussed.
文中就聚合物对无机粒子表面进行包覆改性的原位聚合方法，包括接枝聚合法和乳液聚合法的研究现状进行了综述。
The methods to modify the surface of inorganic particles with in-situ polymerization, including graft polymerization and emulsion polymerization, were reviewed in this paper.
SEM分析表明，采用逆凝聚包覆法制备的PCR粒子为单颗连续粒子，说明产物粒子是由单颗的胶乳液滴凝聚而成。
The SEM analysis shows that the PCR particles are single continuous particles, which shows that the PCR particles are coagulated from the single polychloroprene rubber latex drops.
使用含异丙氧基的阻碍性有机硅氧烷单体可提高乳液聚合的稳定性、增加有机硅氧烷的用量、改善涂膜性能。
When hinder organic silicone monomer with isopropoxy was used, organic silicone level, emulsion stability and film performance could be improved.
结果表明：与传统乳液聚合体系相比，所合成的胶乳耐电解质、耐酸碱、耐有机溶剂的性能均好。
It has shown that the prepared emulsion provides good resistance to hydrolytes, acids and alkali and solvents compared to conventional emulsion systems.
确定了最佳反应条件，并对乳化剂用量和含氟单体的用量对乳液聚合及其产品的影响进行了研究。
The optimum reaction condition is finalized and the influence of amount of emulsifier and fluoro monomers on emulsion polymerization and the product is discussed.
综述了引发剂种类和引发剂的选择，并对引发剂对乳液聚合的影响因素作了分析。
Kinds and choice of initiator were summarized up, and the effect of initiator on emulsion polymerization was analyzed in paper.
用动态激光光散射法测定了丁二烯-苯乙烯乳液聚合的乳胶粒子的粒径及其分布。
The latex particles size and size distribution in emulsion copolymerization process of butadiene-styrene were determined by dynamic laser scattering.
MBS是由丁苯橡胶与甲基丙烯酸甲酯经乳液聚合而得的接技聚合物。
MBS is graft polymers prepared by polymerization of MMA in presence of PBD-styrene rubber emulsion.
一支磨砂沐浴乳、一支豪华的身体润肤乳液和一支美味的滚珠香水，的治疗你的感官。
A delectable sugar scrub, luxurious body lotion and handy fragrance rollerball are a delicious treat for your senses.
研究了题述增稠剂(M - CMHPC)在聚醋酸乙烯乳液(PVA)中的增稠效应。
The thickening effect of the title thickener (M-CMHPC) in polyvinyl acetate emulsion (PVA) has been studied.
本论文采用乳液聚合的方法合成了聚醋酸乙烯树脂，并通过加入硬单体—甲基丙烯酸甲酯对其进行改性。
The method of emulsion polymerization was used to synthesize polyvinyl acetate resin by adding hard monomer_methyl methacrylate to modify it.
研究了乳化剂种类和用量、水相体积分数、温度、搅拌速率等因素对超浓反相乳液聚合的影响。
The stability was affected by kinds and dose of emulsifier, volume fraction of water phase, temperature and velocity of stir.
研究表明采用常规乳液聚合涂膜的光泽较高，而采用无皂和微皂乳液聚合涂膜的耐水性较好，涂料的起泡性较低。
It is shown that conventional emulsion polymerization process leads to high gloss film and soap-free or micro-soap processes will lead to good water resistance and lower foaming.
并与常规加热方式下的乳液聚合结果进行比较。
And the results were compared with those of conventional heating.
考察了聚合温度、乳化剂用量、引发剂用量和PSG用量对细乳液聚合转化率的影响。
The effects of reaction temperature, mass of surfactant, mass of initiator and mass of PSG on the polymerization conversion were investigated.
考察了聚合温度、乳化剂用量、引发剂用量和PSG用量对细乳液聚合转化率的影响。
The effects of reaction temperature, mass of surfactant, mass of initiator and mass of PSG on the polymerization conversion were investigated.
应用推荐