针对这些要求,提出了将空气静压轴承应用于超高速微钻削电主轴支承结构中。
A novel structure of motorized spindle with aerostatic bearings for micro drilling is analyzed.
SLP1060型立旋机是一种新型的人工砂石制造设备,主轴支承是其中关键的部件。
SLP1060 vertical rotating crusher is a new equipment of making grit. Principax axis bearing is a key part of it.
前言:SLP1060型立旋机是一种新型的人工砂石制造设备,主轴支承是其中关键的部件。
SLP1060 vertical rotating crusher is a new equipment of making grit. Principax axis bearing is a key part of it.
研究主轴电极头所受的液体阻力,为主轴支承件的有限元分析和优化设计提供详实可靠的理论依据。
Researching into the force will provide the detailed and reliable basis for the analysis of finite element method and optimal design of strut member.
该方法充分考虑了主轴支承边界条件和有关载荷方面的特点,特别是考虑了由于主轴的垂直安装引起的油膜力的非线性。
This method takes fully into account the characteristics of supports and loads, deals especially with the nonlinearity of oil film force of guide bearing caused by vertical arrangement of spindle.
本文通过粗糙度切削试验,分析讨论了车床主轴油膜减振支承对其加工粗糙度的影响。
This article analyses the influence of the support of oil film vibration damping of the main spindle on cutting degree of roughness through cutting test.
计算机模拟计算和试验研究表明,机床滚动支承主轴系统采用复合式油膜阻尼器,可显著提高机床的动态性能。
Analogue computation and experiments show that employing compound oil film damper in antifriction bearing spindle system will raise significantly the dynamic behavior of machine tool.
解决了套筒与主轴的配合及支承部件的布置形式等关键技术问题。
Solved with the spindle sleeve and bearing components with the layout of the form of the key technical problems.
本文对机床滚动支承主轴系统采用油膜阻尼技术进行了深入、系统的试验研究和机理分析。
The deep, systematic research of experiments and theoretical analysis are made to employing fluid Film damping technology in antifriction bearing spindle system of machine tool.
空间斜支承结构是指其支承端的运动方向与其弹性主轴方向不一致的支承。
Spatial Angle brace is a kind of brace that the movement direction of supporting end is different from the direction of major elastic axis.
主轴部件刚度的研究和支承结构的优化,对于进一步提高加工中心的工作性能有十分重要的意义。
It is important to study the spindle's rigidity and optimization of the supporting construction of the MC.
支承结构可包括用于支承介质卷的主轴(100)并包括用于与识别应答器通信的识别耦合器(110)。
A support structure may include a spindle (100) for supporting a media roll and include an identification coupler (110) for communicating with the identification transponder.
支承结构可包括用于支承介质卷的主轴(100)并包括用于与识别应答器通信的识别耦合器。
A support structure may include a spindle (100) for supporting a media roll and include an identification coupler for communicating with the identification transponder.
用在此基础上编制的计算机程序,在主轴系统实际安装条件下,根据各测点的位移导纳试验数据,对机床主轴系统支承动态参数进行了识别计算。
By the computer program, the bearing dynamic parameters of the lathe spindle sys-tem could be identified using the experiment data when the lathe spindle system is mounted practically.
筒体利用端盖支承在主轴承上。
研究表明,要降低振动对加工精度的影响,应当适当加大主轴跨距,同时增大轴承支承刚度和系统阻尼系数。
The data indicates that the machining accuracy will be promoted when the span of spindle and the rigidity of bearing or damping coefficient are increased.
本文采用截面状态矢量法和模态参数识别方法识别出CM 1107单轴纵切自动车床主轴部件的支承参数和模态参数。
The state vector methd of cross-section and modal analysis methd are used to identify the support and modal parameters of the spindle unit of the single spindle longitudinal automatic lathe mod.
在对主轴部件分析模型进行研究的基础上,采用弹簧阻尼单元模拟轴承支承的方法,建立了主轴部件动力学分析有限元模型。
The finite element dynamic analysis model of the spindle assembly was developed by taking the advantage of the spring-damper elements to simulate the bearing supports.
一种大型洗衣机主轴的密封装置,它是由支承装置、密封介质、注油孔、密封件等组成;
The utility model provides a main shaft sealing device for a large-size washing machine, comprising a supporting device, sealing medium, an oil feeding hole, a sealing element, etc.
实验室采用陶瓷球轴承作支承的电主轴做高速精密磨削。
We adopt the ceramic bearing electric spindle to achieve high speed and precision grinding.
铣头式机床的主轴是多组件、复合支承的特殊结构,影响机床动态性能。
The spindle structure of milling head type machine tool is made up of multi-elements and complex bearing, thus the dynamic characteristics will be influenced.
对五轴联动加工中心主轴系统进行动力学仿真分析,对原主轴系统的轴承支承系统和主轴结构进行了动态优化设计,提出了双排轴承的设计方案。
Based on the dynamic simulation of the spindle system of 5-axis machining center, dynamic optimization design is done for the bearing support system and the structure of the spindle.
采用弹簧单元模拟主轴承支承,使计算模型更接近实际情况。
Adopting the spring unit to simulate the support of main bearing so as to let the computation model be more close to the actual situation.
工作台主轴用长支承距上下两端各一套双列短圆住滚子轴承,保证在高处加工亦能在高精度下平稳的工作。
Supported by a long table spindle from the upper and lower ends of a double row of the short-lived circular roller bearings to ensure that height in the high-precision machining can under steady work.
工作台主轴用长支承距上下两端各一套双列短圆住滚子轴承,保证在高处加工亦能在高精度下平稳的工作。
Supported by a long table spindle from the upper and lower ends of a double row of the short-lived circular roller bearings to ensure that height in the high-precision machining can under steady work.
应用推荐