介绍了该阀主要零件使用的材料。
Introducing material for main parts and discussing existed problems of the valve.
离合器压盘是汽车的主要零件。
往复式压缩机的主要零件是活塞和气缸。
The main elements of a reciprocating compressor are the piston and cylinder.
气动驱动装置主要零件材料及热处理要求。
Pneumatic drives the main components of materials and heat treatment requirements.
车床变速用拨叉是某企业产品的主要零件之一。
Variable speed lathe with a fork is the product of one of the main parts.
气动驱动装置主要零件的主要表面的加工精度。
Pneumatic drive of the main surface of the main parts of the machining accuracy.
主要零件的计算、驱动装置的选择传动机构的设计。
Major parts, drive transmission mechanism of the choice of design.
本文介绍了NJD433型柴油机主要零件选用和试验的情况。
This paper presents the material selection and the experimental results of the main parts for NJD433 diesel engine.
介绍了快换丝锥夹头的结构、工作原理和主要零件的设计计算。
The structure and working principle of a screw tap holder is introduced, and the design calculation of its main parts is presented.
最后对模具的一个主要零件导套进行了简朴的加工工艺路线的制定。
Finally led the wrap to mold major parts to carry on the simple processing craft route formulation.
气动驱动装置缓冲行程长度与气动驱动装置主要零件缸体直径的关系。
Pneumatic drives pneumatic buffer stroke length and drive the main parts of the relationship between cylinder diameter.
本文还对主要零件的加工工艺及存在的问题和改进措施等进行了论述。
This paper also refers to the process technology of its main parts and to the existing problems.
腔体是连续挤压机的主要零件之一，在工作过程中产生复杂的温度环境。
Chamber is one of the main parts of continuous extrusion machine, which produces complicated temperature environment in working process.
介绍了毛坯制备处理、反挤压模具结构设计及主要零件的加工技术要求。
The preparation treatment of the blank, the structure design of the backward extruding die and the manufacturing technical requirements of the main part are introduced.
设计出了主要零件的结构和整体结构，绘制了模具的装配图及部分零件图。
The designer designed the structure of the major parts and the entity model, painted assembly drawing and part of the detail drawings.
详述了倒圆角工具主要零件的设计计算、技术要求和倒圆角工具的使用方法。
The design calculating, technical standard and the using method of the chamfered tool are details introduced.
三牙轮钻头主要零件形状复杂，影响钻头直径及牙轮齿圈啮合误差的因素较多。
There are many factors influencing the bit diameter and the tooth row intermesh due to the complicated shapes of the main parts of a three cone bit.
介绍了裁印、切断、弯曲、成形及粗整模具结构和主要零件设计以及设备的选用。
Cutting, bending, figuration, rough mold structure, design of main parts, the choice of equipments are introduced.
泵在主要零件材质、制造精度、装配精度检验和液压试验合格后，方能进行试运转。
Pump in the major parts material, manufacture, assembly precision accuracy test and hydraulic test after passing the required test run.
通过调查和理论分析，介绍了自动成形模的结构设计、主要零件的设计及成形调试。
Based on the survey and theoretical analysis, the design of construction of automatic forming dies and main details is introduced with forming commissioning.
本产品的主要零件如拖板齿条半齿轮等均采用优质特地材料经先进工艺加工制造而成。
The main parts, such as drag plate, rack and half-gear are all made of special material with high quality though processing under advanced technologies.
摆轮是手表的主要零件，由于它尺寸小，精度要求高，一般说来，它的产品合格率较低。
The balance wheel is the main part of a wrist watch. However, now its percent of pass is relatively low in our watch industry because of its small size and high precision.
本文采用弹塑性有限元法和解析法，对分离机转鼓的主要零件进行了超速自增强的变形分析。
The deformation analysis of the main parts of the disc-separator bowl is performed for the overspeeding process using elastoplasticity FEM and analytical method.
介绍安装板进模的模具结构，重点介绍其排样图及主要零件的设计，同时提供一些经验数据。
The die structure of progressive die of assembled panel is introduced. The strip layout and the design of main parts are also analyzed. Some reference data are also provided.
汽车覆盖件作为汽车车身的主要零件，其质量对整车的性能及外形美观至关重要，质量要求高。
As an important part of the auto-body, automobile panel, decides the automobile performance and the appearance quality, therefore enjoys high demands for its quality.
叙述了油缸的组成及工作原理，较系统地计算了油缸主要零件的参数并对其进行了相应的验算。
Narrating cylinder's composition and working principle, systematic calculate mostly part's parameter of the cylinder and making corresponding checking computation.
当所有的参数计算完后，对模具的装配方案，对主要零件的设计和装配要求技术要求都进行了分析。
With all parameters done, analysis on the assembling of the moulds and requirement of main parts design and assembling was made.
当所有的参数计算完后，对磨具的装配方案，对主要零件的设计和装配要求技术要求都进行了分析。
When all parameter calculations are over after, requested the technique requests to the design and assemble of the main spare parts to all carry on analysis to the assemble project that whets to have.
当所有的参数计算完后，对磨具的装配方案，对主要零件的设计和装配要求技术要求都进行了分析。
When all parameter calculations are over after, requested the technique requests to the design and assemble of the main spare parts to all carry on analysis to the assemble project that whets to have.
应用推荐