所述主控芯片内置有HID设备描述符。
使用RORTUNE主控芯片，内置多层防护装置。
RORTUNE use the main chip, built-in multi-layer protective device.
设计了以8051单片机为主控芯片的智能综合保护装置。
An intelligent and synthetic protective device, with the master chip of 8051 SingleChip micro-controller, is designed.
首先，本文介绍了固态硬盘的总体结构及主控芯片FPGA的特点。
First of all, the article describes the overall structure of Solid State Disk and FPGA features.
系统采用凌阳SPCE061A单片机作为语音识别系统的主控芯片。
The system selects SPCE061A as MCU of speech recognition system.
系统以SPMC75 F 2413 A作为主控芯片来控制单相桥式逆变主电路。
The SPMC75F2413A chip is used as main control chip to control single-phase bridge inverter main circuit.
该系统按照坦克电传动的特点、以DSP为主控芯片设计成的数字控制双闭环系统。
The electric drive system is designed on the basis of the electric transmission feature in tank, which composed of DSP is a two closed loop and digital control system.
它们包括信号采样电路、人机接口电路、主控芯片接口电路、过零触发电路及通讯电路等。
They include signal sampling circuit, man-machine interface circuit and control circuit, main chip interface circuit, zero-crossing triggering circuit, and communication circuit, etc.
本文以TMS320 LF 2407 A作为主控芯片，设计了整个系统的主控制电路。
In this paper, the total system control circuit based on TMS320LF2407A was designed.
主控单元的主控芯片选用了ARM芯片，并配以数据存储电路、按键和液晶显示接口电路。
ARM chip is chosen as the master chip of main control unit, main control unit includes data storage circuit and key and LCD display interface circuit besides.
采用FPGA作为主控芯片，在FPGA内部设计了刺激脉冲发生器，多路选择器和串并转换器。
It USES FPGA as its main control chip. The FPGA comprises a spike generator, a serial-to-parallel converter and some multiplexers.
软件部分主要是对各个功能模块的编程，并通过专门的写入器下载到硬件部分的主控芯片中执行。
The software part is mainly to each function module programming, and download to MCU by special programmer.
因此论文采用了低功耗的数字信号处理器作为主控芯片，构成一种基于数字信号处理器的控制与选线系统。
So, the thesis adopts a type of low loss DSP processor as main controller which composing the control and fault feeder detection system based on DSP in order to deal with the question.
给出了以89s52为主控芯片的下位机系统的软硬件设计，并给出了上位机操作软件和与下位机的通信协议。
The software and hardware design of the substrate control system which USES 89s52 as the main control chip, the PC's operating software and the communication protocols are given in this paper.
然后根据配料秤流量控制的设计要求，设计了以at91sam 7x256单片机为主控芯片的配料秤控制器。
According to the design requirements for flow control of a batching scale, this paper designs a batching scale controller with AT91SAM7X256 single chip microcomputer as the master control chip.
本系统采用了AT 91rm 9200作为主控芯片，并实时将采样信号传输到PC工作站，供PC工作站分析。
It USES AT91RM9200 as its main control chip, and transmits vibration signal to the PC work station which analyses the signal in real time.
电动机采用ML 4425专用芯片作为主控芯片，通过调压控制电机的转速，从而达到控制血液流量及压力的目的。
ASIC chip ML4425 was used as the central control unit. The speed of the motor can be controlled by changing the input voltage and hence the flux and pressure of blood can also be controlled.
论文中对装置的主体电路结构、主控芯片的选择、模拟量输入通道设计和A/D采样方法进行了详细的方案比较和论证。
The main structure of the device, the selection of the microprocessor, the design of analog inputs, and the A/D sampling method are argued in detail in this dissertation.
主控芯片采用AT89C51单片机，通信方式采用抗干扰能力强、可靠性高的DTMF信号和单工调频的无线通信方式。
The master control chip uses AT89C51, the communication mode adopts DTMF signal with strong anti-interference and high reliability, and simplex frequency modulation.
针对不间断供电的需求，介绍了一种以m 68hc 908sr12单片机为主控芯片的双电源转换控制器的研制方案。
To satisfy demand for uninterrupted power supply, the developing scheme of double power switch controller taking M68HC908SR12 controller as main control chip was introduced.
由于嵌入式系统是一个比较广的概念，所以本文以HCS12作为主控芯片的摄像头组小车调试为例对调试方法进行介绍。
Because of the embedded system is a more widely concept, so this paper HCS12 as the main control chip with camera group as an example to car debugging debugging method was introduced.
论文中选用TMS320F 240数字信号处理芯片作为系统的主控芯片，实现了全数字化的直接磁场定向的矢量控制系统。
TMS320F240 digital signal processor that is selected as the main CPU in the system realizes the full digital vector control system.
设计采用数字信号处理器(TMS320 LF 2407dsp)作为主控芯片，能提高控制系统的实时性和数据处理能力。
This design USES digital signal processor (TMS320LF2407 DSP) as a control chip, which helps the system to improve the real-time control capability and data processing capability.
以ARM7处理器(at91sam7s64)为主控芯片的嵌入式光伏MPPT控制方案，由太阳跟踪器和二维平面支架控制器组成。
A embedded PV MPPT control scheme is proposed with ARM7 processor (AT91SAM7S64) as the main control chip. The system consists of sun-tracking device and two-dimensional plane support controller.
各个节点设计上采用内置CAN模块的飞思卡尔16位单片机作为主控芯片来搭建硬件电路，以实现CAN总线的物理层和数据链路层。
Through using 16-bit freescale MCU embedded CAN controller as master chip in each node, it achieved the design of hardware circuit, so realized CAN physical layer and CAN data link layer.
经过比较，选用单向电压源高频链逆变器作为逆变电源的主电路拓扑，采用的飞利浦单片机P 87lpc 768为该电源的主控芯片。
After compares, a unidirectional power flow mode inverter using high frequency link is selected as the main topology and the inverter is controlled by P87LPC768 that is made by Philips.
设计开发的电除尘器电源控制器采用ARM9系列STR912微控制器作为主控芯片，供电电源及信号输入输出模块采用光耦隔离设计方案。
Power controller adopts STR912 of ARM9 series as microcontroller, and USES the technique of optical coupling isolation within the input, output and power supply module.
文章提出采用TMS320 LF 2407为主控芯片，介绍了系统总体方案设计、硬件设计、软件设计、并给出了详细的实验步骤和实验数据分析。
The system USES TMS320LF2407 as major control chip, introduces system main scheme design, hardware design, software design, and gives detail experimental procedure and analysis of experimental data.
文章提出采用TMS320 LF 2407为主控芯片，介绍了系统总体方案设计、硬件设计、软件设计、并给出了详细的实验步骤和实验数据分析。
The system USES TMS320LF2407 as major control chip, introduces system main scheme design, hardware design, software design, and gives detail experimental procedure and analysis of experimental data.
应用推荐