主要介绍中冷器性能测试系统的开发工作。
The work of developing the test-system of intercooler′s performance will be introduced in this paper.
介绍了红外成像系统中冷反射形成的原因。
This article introduces the mechanism of Narcissus effect in the infrared scanning system.
冷凝器、蒸发器、中冷器、油冷器,水箱等。
The main products are condenser, evaporator, inter-cooler, oil cooler, radiator and so on.
找到了适合能源梯级利用的中冷器的结构形式。
At last, the more suitable structure of intercooler to the step utilization of the energy is designed.
食品加工中冷杀菌技术可克服传统热杀菌的不足。
Cold sterilization in food processing can overcome the shortcomings of trandiational sterilization.
双级压缩复叠式热泵系统的最突出特点就是中冷器。
The most important part of the system of TCCH is intercooler.
介绍热管及热管换热器的特点,设计了试验用热管中冷器。
This article introduces the characteristics of the heat pipe and heat-pipe heat-exchanger, and the author designed a heat-pipe intercooler for experiment.
威龙搭载了更大的涡轮增压器和中冷器来匹配w - 16引擎。
The Veyron Super Sport features larger turbochargers and intercoolers fitted to the quad-turbo W-16 engine.
采用抽换散热单节进行中冷器修复后无裂漏,并降低了检修成本。
Using replacement of cooling section to repair intercooler resulted in free crack and leakage, and lower maintenance cost.
结果表明,采用谐振进气系统可有效改善增压中冷柴油机的低速性能。
Significant potential may be tapped in the improvement of low speed performance for turbocharged and intercooled automotive diesel engine by resonant intake system.
并以16 V 2 40 Z柴油机中冷器为例,对该模型的可行性进行了验证。
The feasibility of this model is verified by designing the intermediate cooler for the diesel Type 16v240z as an example.
研究了间接挤压铸件中冷夹层的形成过程及机理,给出了冷夹层形貌的微观分析结果。
The mechanism and course of cold sandwich formed in indirect squeeze cast, and the microanalysis of the form and appearance of cold sandwich were studied.
介绍了汽车柴油发动机中冷器出气胶管的特点,比较了硅橡胶与三元乙丙橡胶的性能特征。
The characteristics of diesel engine intercooler rubber tubes are introduced, and the performances of silicone rubber and EPDM rubber are compared in the paper.
利用瞬态控制及测量系统,对增压中冷柴油机在瞬态工况下的烟度排放特性进行了试验研究。
Smoke emission behaviors of a turbo charged after cooled diesel engine under transient operating conditions were investigated by transient measurement system.
试验散热器模块的第一排为中冷器和液压油冷却器,第二排为冷却水箱,第三排是变矩器油冷器。
The first row of test module was charge air cooler(CAC) and hydraulic oil cooler(HOC), the second row was radiator, and the third is transmission oil cooler(TOC).
介绍了中冷器抽换散热单节的氩弧焊接工艺,分析了中冷器抽换散热单节的焊接特点以及焊接性。
The argon arc welding process after replacement of intercooler cooling section was presented. The welding feature and weldability were analyzed.
本文对蒸发冷却式中冷器进行了初步的研究,该技术具有节能、环保、改善工作条件的多重优点。
In this thesis we have a preliminary study on the evaporated-cooling intercooler, which possesses several strong points of energy saving, environment protecting and work condition improving.
对TR燃烧系统应用增压和增压中冷进行预测,采用增压可使碳烟排放降低6%,但NO升高75%。
The application of supercharge and intercooling in the TR is forecasted. The results show that supercharge reduces smoke by 6% but increases NO by 75%.
通过实例,对中冷回热循环燃气轮机的动态性能进行分析,并与简单循环燃气轮机仿真结果进行比较。
The dynamic behaviors of intercooled regenerated cycle gas turbines are analyzed by an example, and are compared with simulation results of simple cycle gas turbines.
建立了冷热两种物流混合过程的数学模型,找到了混合物流中冷介质的摩尔分数与热物流温降的函数关系。
Cold and hot effluents mixing model was set up, which expressed the function related to cold effluent concentration in mixed effluent and temperature drop of hot effluent.
凭借egr和中冷技术联合运用,新一代柴油发动机的排放水平、动力性能和搭载舒适行都得到了进一步提升。
With an EGR and inter-cooled technology, a new generation of diesel engine emission levels, the dynamic performance and carrying all comfortable got further ascent.
不过,有技术人员说,单独地采用EGR技术并不能达到降低废气排放的目的,还必须配合中冷技术一起使用。
However, technical personnel, by an EGR technology alone does not to reduce emissions, but also must cooperate inter-cooled technology are used together.
以往的冷库中冷源有两种方式,一种是氟利昂机组单机对单个冷库直接制冷方式,一种是乙二醇间接制冷方式。
Two refrigeration methods are commonly used in cold storage warehouse : direct cooling of one unit to one house with freon , indirect cooling with glycol.
本文首先对蒸发冷却中冷器研究的主要部分——蒸发冷却介质,给出了蒸发冷却时的膜模型,分析了影响膜模型的主要因素。
First of all, a membranous model of evaporate-cooling medium during the course of evaporate-cooling was worked out, and several primary factors affected on the membranous model were analyzed.
对中冷再热注蒸汽燃气轮机(STIG)循环火用分析结果表明:中冷再热stig循环比简单STIG循环的火用效率显著提高。
The exergy analysis of an intercooled reheat steam injected gas turbine cycle has shown that such a cycle has a significantly higher exergy efficiency as compared with a simple STIG cycle.
采用不同掺混比的生物柴油分别对两台进口增压中冷车用直喷式柴油机和一辆客车进行了经济性、动力性和排放特性台架试验及车辆道路试验。
The performance and emission tests on two turbocharged diesel engines and a passenger car fueled with different fuel mixtures of diesel and biodiesel are conducted.
针对这一情况,提出了一种新型中冷器技术,就是将普遍采用的蒸发冷却技术应用到中冷器上,利用水蒸发吸收空气热量,从而实现空气温度的降低。
In order to improve its performance, research was done on a new type of intercooler which applies evaporate_cooling technology to the intercooler and lowers air temperature by water evaporation.
同时对稀薄燃烧、增压中冷发动机做了ECUI/O标定、怠速标定、冷启动标定、对电控系统进行全工况内点火提前角的标定、内空燃比的标定、发动机增压压力标定。
Then basic calibration such as ECU I/O calibration, idle speed calibration, cold start calibration, ignition advance calibration, air fuel ratio calibration, boost pressure calibration are conducted.
当您为野餐包装食品时,把冷的食物放在一个有大量的冰的冷却器或商业冻结凝胶中。
When you are packing food for a picnic, place cold food in a cooler with plenty of ice or commercial freezing gels.
当您为野餐包装食品时,把冷的食物放在一个有大量的冰的冷却器或商业冻结凝胶中。
When you are packing food for a picnic, place cold food in a cooler with plenty of ice or commercial freezing gels.
应用推荐