通过溶液聚合法制得了阻燃性丙烯酸酯胶。
Fire retardant acrylic ester was prepared by the radical copolymerizations.
AC系列丙烯酸树脂适合于广泛的金属、胶及汽车涂料应用范围，光泽、度优异。
Ac series acrylic resin has excellent glossy and hardener, suitable for all purpose for plastic and metal and car coating.
本研究采用丙烯酸酯单体聚合制成一种全新的合成冷封胶。介绍了制备方法和有关性能。
The preparation process and the related properties of the cold-seal adhesive polymerized from acrylate monomers were included in the paper.
以甲基丙烯酸甲酯为硬单体，丙烯酸丁酯为软单体，丙烯酸为功能单体，环氧树脂为改性剂制备了密封胶用环氧改性丙烯酸树脂。
The epoxy modified acrylate resin for sealant is prepared with methyl acrylate as hard monomer, butyl acrylate as soft monomers, acrylate acid as functional monomers and epoxy resin as modifier.
该密封胶的胶体为丙烯酸酯与醋酸乙烯酯的共聚物。
Jm-2 is based on the copolymer of acrylate and vinyl acetate.
通过采用预乳化和半连续法乳液聚合工艺，合成了一种水乳型丙烯酸酯复合胶。
A type of acrylic emulsion adhesive was prepared by pre-emulsion and half-continued polymerization.
通过硫化曲线评定，选用苯甲酸铵作硫化剂对环氧型丙烯酸酯橡胶低温胶进行硫化。
Through vulcanization curves evaluation ammonium benzoate was selected as the vulcanizing agent of epoxy acrylate rubber (EACM).
用2-甲基丙烯酸和硬脂酸制得的活性硅铝氧烷溶胶对NBR硫化胶无增强作用。
It was also showed that the active aluminosiloxane sol from 2-methylacrylic acid and stearic acid had no reinforcing effect on NBR vulcanized rubber.
氯丁橡胶（CR）、甲基丙烯酸甲酯（MMA）和丙烯酸（AA）在低毒溶剂中接枝成胶。
The chloroprene rubber(CR) combined with methyl methylallate(MMA) and allenoic acid(AA) to obtain graft adhesive in low poisonous solvent.
实验表明，固化一转移工艺不仅能够较好地解决溶液型丙烯酸酷压敏胶的转移施胶，而且有利于降低压敏胶的残留。
The cured-transfer process not only successfully resolved the transfer difficulties in that of solvent-type PSA, but can reduce residues of PSA when debinding.
以SBS和SIS为基材，采用不同橡胶胶种、丙烯酸及其酯类单体进行接枝共聚合成胶粘剂。
This paper mainly studies to synthesize adhesive by graft modification of SBS/SIS block copolymer with rubber or acrylic acid and acrylic ester.
实坚胶灰增贴剂是一种笨乙烯丙烯酸聚合胶液，也是一种高性能液体添加剂，专为增强胶灰的贴性伸缩性及强韧而制。
Skim tile Fix Ad-Plus is a styrene acrylic polymer latex. It is a high performance liquid additive specially designed to enhance the elasticity and strength of cement based tile adhesive.
并讨论了单体组成以及单体中丙烯酸羟乙酯与固化剂的比例大小等因素对胶黏剂性能的影响。
The effects of compositions of monomer and ratio of EHA to curing agent in monomer on the performance of adhesive are discussed.
本文研究了固化时间与粘接强度的关系，而且应用红外光谱研究了第二代丙烯酸酯胶的固化机理。
In this paper, the relationship between the solidification time of SGA and its shear strength has been studied. On the other hand, solidification mechanism of SGA also has been studied by the IR.
介绍了需氧胶的特性、用途及制备方法，并与二代丙烯酸酯胶、厌氧胶作了对比。
Performances, applications and preparation of aerobic acrylic adhesives were introduced in comparison with 2nd generation and anaerobic acrylic.
采用三维弹塑性有限元方法，研究了酚醛树脂和丙烯酸树脂两种胶粘剂的胶焊接头中，板宽对应力分布的影响。
The method is used in this paper to study the influence of plate width on plate shape, and some varying rules of crown with plate width are discovered.
采用三维弹塑性有限元方法，研究了酚醛树脂和丙烯酸树脂两种胶粘剂的胶焊接头中，板宽对应力分布的影响。
The method is used in this paper to study the influence of plate width on plate shape, and some varying rules of crown with plate width are discovered.
应用推荐