白光扫描干涉法在三维表面形貌的测量中有着广阔的应用前景。
Scanning white-light interferometry for 3D surface topography has a wide application.
此方法已成功地应用于自行研制的衍射光学元件三维表面形貌测量系统中。
The method has been successfully used in the system for measuring the 3-d surface topography of diffractive optical elements.
最后利用三维表面形貌仪，分别对湿法刻蚀和干法刻蚀的磁头结构进行了数据分析。
The etching parameters and the photos of the head slider were presented. 3D surface microstructures of the head sliders were analyzed by Vecco MHT-III interferometer.
利用计算机仿真技术，定量分析了上述因素对铣削加工振动和工件三维表面形貌的综合影响。
By applying computer simulation technology, influences of above factors on milling vibration and 3d surface topography of workpiece are analyzed quantificationally.
物体表面三维形貌测量在逆向工程、机器视觉、在线产品检测以及医疗诊断等领域的应用日益广泛。
Three-dimensional shape measurement of object surface is now widely applied in different areas, such as reverse engineering, computer vision, online product inspection and medical diagnosis.
模拟的薄膜的三维形貌显示，在薄膜的表面存在着柱状结构，这与实验是相符的。
The simulated images of the film display a column structures, agreeing well with the experimental results of our group and other researchers.
建立了一种研究激光刻花轧辊表面形貌的三维模型。
A three-dimensional model for studying the surface shape of the rolls textured by laser beam is set up.
实验结果表明本文采用的光栅投影式物体表面三维形貌测量方法能够获得比较满意的结果。
It is proved that this measurement method for three-dimensional shape of object surface with grating projection presented in this dissertation can obtain good results.
本文介绍采用触针式轮廓仪与通用微型机相连的表面三维形貌测量系统。
In this paper, a three-dimensional measuring system for surface asperities is described, in which a microcomputer is interfaced to a stylus profilometer.
采用激光三维扫描方法，对树脂结合剂砂轮的表面形貌进行了测量。
In this paper, the surface topography of resin bonded grinding wheel was measured by laser 3d scanning.
为了实现长、细管道内表面三维形貌检测，基于光学三角原理研制了一种新型检测器。
For inspecting the 3d shape and appearance of the inner surface of long and tiny pipe, a new type of sensor was proposed based on the principle of optical triangulation.
潘兵，谢惠民，李艳杰。用于物体表面形貌和变形测量的三维数字图像相关方法[J]。实验力学，2007,226：556- 567。
PAN b, XIE h, LI Y. 3d digital image correlation method for object surface topography and deformation measurement [j]. Journal of Experimental Mechanics, 2007, 22 (6) : 556-567.
目的对比观察正常培养、NMDA损伤及MK- 801保护皮层神经元膜表面三维构象形貌改变。
Objective to comparatively observe the changes of three-dimension topography in culture neuron membrane respectively by NMDA injury, MK-801 protection and normal cultivation.
AFM较SE M能更细微地分辩损伤保护作用后引起的细胞膜表面三维形貌改变并可以做出定量分析。
AFM is better in distinguishing the three-dimension surfaces in neuron membrane after injury and protection than SEM.
依据白光干涉理论，研制了垂直扫描白光干涉表面三维形貌测量仪。
Based on the white-light interference, a vertical scanning white-light interfering profilometer was designed.
为了实现强反射表面三维形貌的光学非接触测量，提出一种改进的投影栅相位法。
An improved non-contact optical measuring method, projected fringe profilometry, is proposed to realize the 3-d structure measurement of high reflective surfaces.
构建了一种应用结构光三维视觉检测技术对微小型构件内表面进行三维形貌检测的系统。
A 3d shape inspection system for inside surface of microminiature workpiece based on structured light vision is presented.
用三维形貌仪测量工件的表面粗糙度，并对数值进行分析，结果表明磨牙冠的加工符合设计要求。
The surface roughness of workpiece was measured with 3d Profiler. The test results show that the surface roughness is consistent with design requirements.
用三维形貌仪测量工件的表面粗糙度，并对数值进行分析，结果表明磨牙冠的加工符合设计要求。
The surface roughness of workpiece was measured with 3d Profiler. The test results show that the surface roughness is consistent with design requirements.
应用推荐