The Dip-spin processing was adopted and by drying and solidification gained the zinc-basic coating with high corrosion-resistance.
采用离心浸涂的处理方式，经烘烤固化得到高耐蚀锌基涂层。
Effects of basic coating performance of stain resistance were studied in the light of drying time, hardness and surface tension of the coatings.
从涂料干燥时间、硬度和表面张力出发，研究了这些基本性能对涂料耐沾污性的影响。
Zinc basic coating, prepared with flake zinc powder, aluminum powder, chromic anhydride and some other organic compounds, possessed good combination force and corrosion resistance.
利用片状锌粉、铝粉、铬酐及其它有机物配制的锌基涂料具有良好的结合力和耐蚀性。
Finally, the best prescript of nano epoxy bond coating is recommended. The basic data are recommended for the aim of usage in bonding field.
推荐了具有较好耐磨粒磨损能力的环氧树脂纳米胶粘涂层的最佳配方，为其在胶粘领域推广应用积累基础数据。
Second times the coating construction: in the first pass of the basic curing coating, and then scraping the surface of the coating second times, the coating method with the first coating.
第二遍涂层施工：在第一遍涂层基本固化后，再在其外观刮涂第二遍涂层，涂刮方法同第一遍涂层。
This paper introduces the conversion coating with rust, stable rust paint, permeable paint with rust and functional mechanism, with rust paint basic scope of application and its development trend.
本文介绍了转化型带锈涂料、稳定型带锈涂料、渗透型带锈涂料以及功能型带锈涂料基本的作用机理、适用范围及其发展趋势。
With the basic equations of rotating coating process, the velocity distribution of the flow of a thixotropic fluid on a rotating disk was derived.
采用甩涂过程的基本方程，导得触变性流体在旋转圆盘上流动的速度分布。
In this paper, both basic structure of lubricant coating device and its working principle are discussed and the deformation of some workpieces is analysed and calculated.
对轿车铝合金轮毂模具涂敷装置的基本结构及工作原理进行了探讨，并对杆件的变形予以分析与计算。
On this basic, we studied the amphiphilic polymer's application to pure organic hydrophilic coating for air-condition.
在此基础上研究了两亲聚合物作为纯有机空调用亲水涂料的应用。
The key basic technology in full mould casting process includes: material and formation of pattern, coating, vibratory fill of moulding sand as well as molten metal filling.
实型铸造法的关键基础技术包括：模样的材料及成形、涂料、型砂的振动充填、金属液的充填。
Multi - coating availably solves the problem of matching between basic material and coating, but the technology of multi - coating seriously affects the adhesion.
复合涂层可有效地解决基膜的匹配性，但多层涂镀工艺对涂层间附着性等质量问题有重要影响。
The basic contents of quality control in coating process, basic requirements for coating inspector, technical training and et al are introduced.
介绍了涂装质量检查的基本工作，涂装检查人员的基本工作要求和技术培训等。
This paper introduces the masking tape characteristic and coating method, describes detailedly the basic structure and disposition of the coater for the masking tape production.
介绍了美纹纸的特点以及美纹纸的涂布方式，并详细阐述针对此纸种开发的涂布机的基本结构特点及配置。
Main varieties, production technology, basic formulations, influencing factors on coating film, application fields and existing problems for powder coatings containing aluminum powder are discussed.
介绍了金属粉末涂料的主要品种、制造工艺、基本配方、影响涂膜性能的因素、应用领域和存在的问题。
This paper presents the basic concept, process, and formulation of foam coating, and conducts aninvestigation on the factors that affect the results of the coating process.
本文介绍了泡沫涂层的基本含义、工艺及配方；探讨了涂层工艺的影响因素；
In the production of PU color-change transfer coating leather, the basic form, color-change mechanism, the pulp of the film, and the controlling parameter of operation are introduced.
介绍了PU变色贴膜革的基本构成、变色机理、变色贴膜加工程序以及膜层浆料配方、操作参数控制等生产技术。
The study on the coating material has been made on basic material selection, additive and solution analysis, performance test and field application.
从这种防腐涂料的基料选择、颜填料及溶剂分析、性能试验及现场应用等几个方面进行了研究。
The silicone resin marine anti-fouling coating was prepared by using NaPT as the marine anti-fouling agents and silicone resin as the basic material.
以苯甲酸钠为防污剂、硅树脂为基料，制得硅树脂海洋防附着涂料。
Basic principles, methods, processes and equipments for pipe, wire coating and stripe processing and moulding of PTFE dispersion resin are introduced.
介绍了聚四氟乙烯分散树脂的管材、电线包覆和带材加工成型的基本原理、方法、工艺及设备。
Examples of coating methods are listed and the basic flow equations are derived.
本文列举涂布工艺的实例，给出基本流动方程。
The typical equipment, the basic principle and arc plasma process of anodic vacuum arc coating are presented.
介绍了阳极真空电弧镀膜方法的镀膜装置、工作原理及电弧等离子体微观过程。
The fiber paper are used as the basic materials of PVDC latex coating packaging materials, with the same packaging property as painting PVDC on other plastics films.
用纤维纸作p VD C胶乳涂覆型包装材料的基材，具有与以塑料为基材的涂覆膜相同的包装性能。
Under used temperature, the coating has high combining strength with basic material, has good resistance to corrosion, resistance to oxidation and heat stabilization and this coa…
在使用温度下涂层与基材结合强度高、耐腐蚀、抗氧化性能和热稳定性能好、使用寿命长。
An expandable transparent, waterproof and flame retarding coating has been developed with ethanol-modified mixed resin as basic material and phosphoric acid and starch as flame retardant.
研制出一种以乙醇改性共混树脂为基料，磷酸和淀粉为阻燃剂的膨胀型透明耐水阻燃涂料。
This article reviews the basic physics of ECR discharge and experimental research, and describes new applications of ECR plasma in surface processing, plasma coating and ion source.
本文综述了ECR放电的基本物理过程和实验研究概况，介绍了ECR等离子体在表面处理、镀膜和离子源等方面应用的最新结果。
The influence factors such as the hydrogen content in weld metal, the hydroscopicity in electrode coating and the toughness of weld metal of basic electrodes are studied.
研究了碱性焊条工艺性的影响因素，探讨了焊缝金属的含氢量、焊条药皮的吸湿性、焊缝金属的强韧化特性等。
The basic properties, surface modification technology of nano-particles and the preparation of nano - modification coating are introduced.
本文叙述了纳米粒子的基本特性、表面改性技术、纳米粒子改性涂料的制备。
In this paper, the progress and current situation in research of the zinc-basic paint with high corrosion resistance technique and the specialty of the properties of the coating are introduced.
本文介绍了高耐蚀锌基涂料技术的历史及其在国内外的研究和应用情况，以及涂层性能特点。
The basic condition of gradient liquid phase sintering, the micro structure and the poperty of coating bonding are discussed.
分析了喷涂层梯度液相烧结的基本条件 ，并观察了其显微组织及其结合性能。
The basic condition of gradient liquid phase sintering, the micro structure and the poperty of coating bonding are discussed.
分析了喷涂层梯度液相烧结的基本条件 ，并观察了其显微组织及其结合性能。
应用推荐