The estimation formula for slit-type buckets maximal pressure intensity is given through analysis and hydraulic model test.
通过分析研究和水力模型试验，提出了窄缝式挑坎最大动水压强的估算式。
Together with the operation experience, the type and position of transformers fault can be determined correctly through comprehensive analysis on the data of electrical test and gas chromatography.
结合平时的运行经验，对电气试验和气相色谱分析数据进行综合分析，可以比较准确地判断变压器故障类型和故障部位。
The designed technical parameters, structural characteristics, dynamics calculation and test analysis of the PW 200 type bogies are described.
介绍了PW—200型转向架设计技术参数、结构特点、动力学计算和试验分析。
The test and analysis shows that this type of control system is capable of lessening structural vibration response efficiently.
试验与分析表明，所提出和研制的半主动控制系统能够有效地减小结构的振动反应。
Through tests, the wall temperature distribution of platen type reheater has been obtained, and the over-temperature of reheater tube being known from the analysis of test results.
通过试验得到屏式再热器的壁温分布，分析试验结果找出超温的再热器管。
As you analyze the test results for each test, you can select a failure type and resolution for each failed test, or add a comment about your analysis to this point.
在分析每个测试的测试结果时，可以选择每个未通过测试的失败类型和解决方法，或添加有关截止到此时所执行的分析的注释。
So test research and theoretic analysis should be done to optimize designing such type transfer-structure. The dissertation comes from an actual project.
所以，对于如何优化设计该种类型的转换结构，需要进行试验研究和相应的理论分析。
Type curve match analysis is the main method of modern well test interpretation, but the error of this method is unavoidable because of the limitation of the type curves in a sample plot.
图版拟合是现代试井分析的主要方法，由于图版上典型曲线分辨率的限制，使得典型曲线图版拟合分析不可避免地存在误差。
The compressive modulus of Elasticity of the butanone rubber gasket are given, based on the compressive test Value of this type gasket, with the analysis and inference method by the authors.
笔者以垫片的压缩试验数据为基础，用分析推理的方法，确定出了丁腈橡胶垫片的压缩弹性模量。
In this paper, analysis is made on the stress distribution of type 13 couplers by the photoelastic simulation test method.
本文用光弹性模拟试验方法分析13号车钩的应力分布状况。
The test and analysis results of model for the C6132 type lathe structure are introduced in this paper.
本文介绍了C6132车床结构实验模态分析的测试、分析与结果。
Through the loading experiment of type 7yp950's front fork by using hydraulic testing machine, the test data had been compared with the theory analysis.
采用液压式万能试验机对7yp - 950型农用运输车的前叉减振机构进行模拟实际工作状况的加载试验，将实测数据与理论分析数据相比较。
This paper analyse the dynamic characteristics of cylinder block of type ZS1105 D. I. diesel engine applying test mode analysis technique.
应用试验模态分析技术对ZS1105直喷式柴油机机体的动态特性进行了分析、研究。
Based on the analysis of test result on filtration of airborne particle, the feasibility on removal of oil mist by using wash-type metal filler air filter is analyzed.
在对大气尘过滤试验结果进行整理分析的基础上，对采用洗涤式金属填料空气过滤器去除油雾的可行性进行了分析。
This paper has described the measure principles, the calibration method, the application test and data analysis of the nuclear-earth-base-density-moisture-gauge of type NDH-A.
本文阐述了ndh—a型核子土基密度、含水量联合测定仪的测量原理、标定方法、使用试验及测试数据的分析。
A test analysis is made on macro-failure and micro-failure characteristics, metallography and corrosion mediums of U-type stainless steel bellows type expansion joints leaked.
对发生泄漏的不锈钢u型波纹管补偿器的宏观失效特征、微观失效特征、金相、腐蚀介质进行试验分析。
Methods By retrospective analysis and detection of serum antibody in different type paragonimiasis patients using Dot-ELISA and TEST.
方法对斯氏狸殖吸虫病进行临床分析，采用斑点elisa法与IE ST法对不同类型肺吸虫病人血清抗体的检测。
The vibration generating mechanism of a new type of mechanical transmission unit have been analyzed and revealed through theoretical analysis and vibration measurement on a test-rig.
通过对三环减速机环板动态受力过程的分析与振动试验，揭示了其振动发生根源。
Examples of superposition analysis method for changing production rate test are given in the paper. The results are compared with the results getting from Horner method and type curve matching method.
文中给出了变产量叠加方法应用的示例，并与霍纳方法及典型曲线拟合方法进行了对比分析。
By theoretical analysis and lab test, put forward a kind of new type bolts which may prevent bolt tails from being broken, bolt construction structure's pattern, and bolt made technology.
通过理论分析和实验，提出了一种防止锚尾破断的新型锚杆，以及锚杆结构形式和加工制造工艺。
Many factors may create the deviauon of determination result for spark discharge atomic emission spectrometric analysis, such as type standard choice and processing method for test spcimen.
选择类型标样的不同、试样加工方法的不同，都可能造成直读光谱仪测定结果的偏差。
A new type nano test system is introduced, the test principle and the indentation data analysis method are described.
介绍一种新型的多功能纳米材料性能测试仪，阐述仪器工作原理和压痕数据分析法。
With the parameters of a real dry-type air-core reactor, the emulation analysis verifies that the impulse-voltage method is suitable to test its turn-to-turn insulation.
基于脉冲电压法原理，对一个实际干式空心电抗器的电路参数进行了计算机仿真分析，验证了脉冲电压法对干式空心电抗器进行区间绝缘检测是可行的。
With the parameters of a real dry-type air-core reactor, the emulation analysis verifies that the impulse-voltage method is suitable to test its turn-to-turn insulation.
基于脉冲电压法原理，对一个实际干式空心电抗器的电路参数进行了计算机仿真分析，验证了脉冲电压法对干式空心电抗器进行区间绝缘检测是可行的。
应用推荐