本论文设计了三个实验，旨在验证和比较这两种关于产生式建立的主要观点。
Three experiments are run in this disquisition to compare two different viewpoints about establishment of productive rules and production system.
目前对内冷式刮膜薄膜蒸发器进行研究，一是以模拟研究为主，所得到的结论未经实验数据验证；
Recent research on the inner condensing wiped thin-film evaporator is mainly on the theoretical of the evaporating process, but unfortunately without certification by the experimental findings.
经过实验证明，执行分布式有反馈融合算法时的效果最好。
It has been improved that the result of distributed recursive algorithms is better than others.
报道了一种太阳能吸附式空气取水器的技术方案，对其进行了原理分析和实验验证。
The operation principle of solar powered drinking water producing apparatus which condenses the water from air using adsorbents is presented and verified by experiment.
将捷联式罗经算法移植到DSP系统中加以实现，通过实验验证了整个系统算法的可行性，从而完成了捷联式光纤陀螺罗经系统的设计。
The algorithm of strapdown gyrocompass system is replanted into DSP for realization, and feasibility is validated by experiment, so the design of strapdown gyrocompass system based on FOG is finished.
实验证明由该种“复合式极板”构成的电容式浓度传感器的检测场均匀性误差可达13%，远远优于单对极板的该项指标。
Test results showed the homogenous error of sensitivity distribution of the sensor was 13%, which is much better than the capacitance sensor with only one pair of electrodes.
总之，本文在理论研究的基础上，通过大量实践性实验，验证了时空坐标转换理论和场式时栅理论。
In a word, on the basis of theoretical research, this paper verifies the space-time coordinate transformation theory and field-mode time-grating theory through doing experiments in a large amount.
实验证明，基于3维小波变换的3维SPIHT编码算法在对超光谱图像压缩时，表现出了优良的率失真性能。 并且算法复杂度适中，具有嵌入式特性。
The test results show that the 3D SPIHT algorithm based on 3D DWT for hyperspectral images compression is very efficient, the algorithm is embedded and has modest complexity.
经实验验证：该系统能够检测到熔池的温度场变化信号，并能控制步进式TIG焊的焊接时间和行走时间。
The experiments show that the variable temperature signal can be detected and the welding time and traveling time can also be controlled in "step" TIG welding by this system.
实验结果表明，该方法可在软件工程中有效地提高高可信嵌入式软件开发和验证的效率。
The experimental result shows that the strategy could significantly improves the efficiency of development and verification of high-confidence embedded software.
本文分析讨论了轮辐式扭矩传感器的原理和精度，并用有限元计算和实验加以验证。
Principle and accuracy of the sensor are analysed and verified with finite element calculation and experiment.
实验证明，开放式消防网络系统是可行的。
The experiment proves the open fire fight network system is viable.
探索出“验证型、应用型、综合设计型”三阶段式实验教学新模式。
The laboratorial teaching model of three stages about testing and verifying, applying and synthetical designing is explored.
实验证实，该理论模型具有相当的实践性和可行性，并能更加有效地提高背越式跳高的教学效果。
Positive studies show that the model is practical and feasible and can effectively enhance the effect of teaching the back-style high jump.
理论上，导出了该传感装置的调制函数关系式，并用实验进行了验证。
Theoretically, the characteristic modulating function and its curve compare with the experimental data were given.
实验证明，采用分布式的告警相关性模型可以有效提高系统的故障诊断水平。
The experimentation has proved that the fault diagnosis efficiency is prompted by the distributed alarm correlation systems.
实验证明，系统可以有效实现分布式网络环境下的入侵检测。
The experiments proves this the system may carry out intrusion detection under distributed net- work environment.
经过比较分析，发现LC - OFDR的性能参数非常适合应用于光纤光栅准分布式传感网络，实验验证的其可行性。
Based on the analysis to its parameters, this LC-OFDR is particularly suitable for fiber grating quasi-distributed sensing network which is demonstrated in our experiments.
给出了计算气轨上滑块运动加速度的另一公式，并用实验进行了验证。
This paper offers another formula to calculate acceleration of gliding blak movement on air cushion track, and it has been proved with experiment.
本文在模拟火灾的条件下，对分维值和强度之间的关系式进行了验证，实验误差在可接受的范围内。
The article examined relationships between the fractal dimension value and the intensity on simulated fire condition. the experimental error was in the acceptable scope.
通过对对旋式轴流通风机小流量特性的分析，并利用实验验证分离器能够控制和改善对旋风机小流量内部流动特性，从而获得叶片分离器设计和使用的一些关键技术。
The working principle and key parameters of the blade separator were introduced, and tests on the performances of adding the separator on the contra-rotating axial flow fan were carried out.
为了验证活塞式螺旋绕组磁通压缩发电机（MFCG“）减小电感以放大电流”的工作原理，设计制作了活塞式螺旋绕组MFCG原理样机，并完成了原理实验。
A kind of piston-type magnetic flux compression generator (MFCG) prototype model with a helix winding is developed to prove the working principle of decreasing the inductance for the enlarged current.
通过仿真实验，验证了该自主式学习方法的有效性。
Simulation results illustrate the efficiency of this self-learning method.
通过实验验证了该算法的有效性，并以峰值信噪比(PSNR)为评价准则，利用多项式拟合方法选择了最优参数。
Experiments proved the validity of the model. Taking Peak Signal-to-Noise Ratio (PSNR) as criterion the best preference was found by using polynomial fitting.
利用这种方法，对典型的去耦式双二次二阶带通滤波器进行了计算机模拟及实验验证。
Using this method, the computer simulation and the experimental verification of a typical decoupled biquad second-order bandpass SCF are conducted.
解决了高压释放式活塞的密封问题，通过实验证明锥体活塞工作可靠、寿命长，有比较好的应用前景。
The seal of high pressure release cone piston had been resolved, The examination proved that cone piston has long life and reliable work. The cone piston will be applied widely in the future.
解决了高压释放式活塞的密封问题，通过实验证明锥体活塞工作可靠、寿命长，有比较好的应用前景。
The seal of high pressure release cone piston had been resolved, The examination proved that cone piston has long life and reliable work. The cone piston will be applied widely in the future.
应用推荐