采用有限元分析方法分析了硬三角胶尺寸对轮胎静态力学性能的影响。
The influence of the dimension of hard bead filler on the static mechanical properties of tire was investigated by FEA.
材料的动态硬度与静态硬度或其它静态力学性能指标之间没有简单的直接关系。
It was found that there was no direct relation between dynamic hardness and static hardness or other static properties of material.
采用静态力学法，分析了中等密度、孔隙率的泡沫钼静压全程加载-卸载特性曲线。
The characteristic curve of full loading unloading with mid density sintered porous Mo specimens has been analysed under lower hydrostatic pressure.
结合模型试验和数值计算对大潜深、带大开口的球形耐压结构静态力学性能进行了研究。
Based on the model experiment and finite element analysis, structural static performance of a pressure spherical model with a big viewport is discussed in this paper.
最后考虑并研究了帘线角、初始内压和附加容积等主要参数对空气弹簧静态力学性能的影响。
Finally, some major parameters such as cord Angle, initial inner pressure and additive volume were taken into account, which had remarkable effect on the air-spring's static performance.
利用有限元分析软件ANSYS，对沉箱重力式码头在船舶荷载作用下的沉箱静态力学性能进行数值分析。
Using finite element procedure ANSYS, we analyze caisson gravity wharf acted by the vessel load in the static condition.
然后根据静态力学的有关知识，提出了立柱三种静态工况的模拟，并施加载荷对立柱进行静力有限元分析。
Referring to static mechanics, three types of static operating conditions are simulated and static finite analysis is made after the loads are applied.
在反复进行优化模拟后，对分子模型体系进行了静态力学性能的分析，得到了SU-8胶的力学弹性常数。
After repeated optimization simulation, a stable cell structure was obtained. The elastic constants of SU-8 photoresist were gained after analysis of the static elastic properties.
路基路面结构在运营中主要承受交通车辆的作用，它的实际工作状态与现行的静态力学计算体系有较大的差距。
Subgrade and pavement mainly bear the vehicle loads under the transport conditions. The actual working state of the subgrade and pavement has difference from the static mechanical calculation system.
介绍了MTS810陶瓷试验系统的工作原理及其在陶瓷材料各种常温及高温动、静态力学性能测试中的应用。
The principle and features of MTS810 are introduced, and the applications of MTS810 for evaluating mechanical property of ceramics in normal and high temperature environment are discussed.
经层状化增韧，热固性基体复合材料的抗冲击损伤性能得到显著提高，同时原有的静态力学性能基本上没有受到影响。
Laminated-toughened TS matrix laminates showed remarkable enhancement in impact damage resistance, while their static mechanic properties were well kept.
本文在MR阻尼器的准静态力学模型基础上，设计制作了新型MR阻尼器，该阻尼器具有适用范围广，性能稳定的特点。
New type of MR damper is designed and made based on the quasi-static model, so called parallel-plate model of MR dampers, which has the advantage of high dynamic range and stable performance.
为此，对弓的静态力学性能进行了实验研究，并分析了箭巢位置的选择，提出了一种射箭运动员确定最佳箭巢位置的方法。
Therefore, it made the statics experimental research and analysed the selecting of the position of arrow's nest and put forward the way of fixing optimum position.
研究了PA6/PTFE和PA66/PTFE共混物的熔融过程的热学性能、动态力学性能和吸水前后的静态力学性能。
The melting temperature, melting heat, static and dynamic mechanical properties of PA6/PTFE blends and PA66/PTFE blends are experimentally investigated in this paper.
油井水泥石属于脆性材料，其在动态下的力学性能与静态下的情况相比有显著的差异。
As oil well cement stone is a brittle material, its dynamic mechanical property differs remarkably from that of a static condition.
本文研究了在不同的熔体温度和模具温度下，注射成型的聚丙烯塑料试样的静态和动态力学性能；
The static and dynamic mechanical properties have been studied for PP that have been injected at different melt temperature and mold temperature.
研究兼顾静态性能和力学环境适应性的信号检测方案是高精度光纤陀螺实用化的迫切要求。
Good static and dynamics environment performance of the signal detection scheme is necessary to meet the practice application of the high precision fiber optic gyroscope (HPFOG).
通过室温下的仪器化冲击试验和静态拉伸试验，研究一种低屈服比高强度钢板在冲击载荷下的力学性能和断裂机理。
Mechanical properties and fracture mechanism of high strength steel sheet with low yield ratio under impact loading have been studied through instrumented impact and quasi-static tensile tests.
本文运用弹性杆理论建立了小应变、大挠度铺设过程中海底管道的静态分析力学模型。
In this paper, the elastic rod theory is applied to establish a static analytical mechanical model for a small strain, large deflection Marine pipeline during installation in ocean.
研究了共混时间对动态硫化EPDM/PP体系结构、静态以及动态力学性能的影响。
The effect of the blending time on the structure, the static and dynamic mechanical properties of dynamically vulcanized EPDM/PP blend was investigated.
详细讨论了“V”型切槽在冲击波的动态压力和爆轰气体的准静态压力作用下所产生的力学效应。
The mechanical effects produced by the V-shape notch, which is under both the dynamical pressure of explosive shock wave and the quasi-static pressure of explosive sas, are discussed in detail.
通过静态试验、动态试验和再生试验研究了天然斜发沸石吸附氨氮的热力学性质、再生性能和影响因素。
The absorption capability, the regeneration capability and the influencing factors of the clinoptilolite to ammonia nitrogen are studied through static state test , dynamic test and regenerative test.
对于气体搅拌的萃取过程，静态混合器的型式和规格对传质性能和流体力学性能的影响很大。
So the type and specifications for motionless mixer have a great influence on the mass transfer and fluid mechanics properties.
对静态发酵生产细菌纤维素的动力学模型进行了研究，初步建立了细菌纤维素静态发酵生产的动力学模型。
The paper mainly studied the dynamical model of the static fermentation of Bacterial Cellulose(BC). Thus the dynamical model of BC in static fermentation was established.
文章对热力学准静态过程与非静态过程进行教学研究，并提出处理热力学过程有效和准确的方法。
This paper studies the thermodynamic quasi-stationary and non-static processes from the Angle of methodology, and presents an efficient method for the thermodynamic processes.
本文提出了光面爆破和预裂爆破的断裂力学模型，分析了应力波、爆生气体准静态压力在爆破破裂过程中的作用。
This paper presents a fracture mechanics model of smooth blasting and pre-split blasting, analyzes the function of stress waves and quasi-static pressure of explosion in blasting process.
对静态发酵生产细菌纤维素的动力学模型进行了研究。
The dynamical model of static fermentation of Bacterial Cellulose was studied and established.
对静态发酵生产细菌纤维素的动力学模型进行了研究。
The dynamical model of static fermentation of Bacterial Cellulose was studied and established.
应用推荐