样机设计过程是在选定设计条件后，利用参数化模型设计软件进行零件设计和整机装配。
The process of prototype design is that parts design and system assembly are completed by parameterized model design software after conditions given.
考虑了传动系统中所有零件的分离，并详细分析了其动力学性能，由此得到了相关的重要结论，可以用于系统的设计参数选择。
The dynamic characteristics of the model had been analyzed in DE - tail, and the system dynamics results can be used for the references of every part.
目前参数化设计约束处理技术操作的直接对象是基本图形元素和约束，这在复杂零件参数化时会遇到困难。
The existing parametric design softwares are not safficient for processing the complicated parts We present a new method based on graphics decomposition to solve the problem.
本文将网络化信息发布技术应用于CAD系统的零件设计，提出了通过网络化参数驱动建立三维模型的新方法。
In this dissertation, networked information releasing technology was applied to part design in CAD system, brought forward a new three dimensional modeling method by networked parameter drive.
对于工程机械计算机仿真模型试验、系统设计参数优化、传动系统的零件寿命的评估尤其是车辆换挡平顺性的研究具有一定的实用意义。
All is directed toward computer Simulation model testing optimizing system design parameters and evaluating power train component capability and especially vehicle shift-feel.
根据用户选择的基本设计参数，得到调用对应的零件族中的某一个实例零件，实现标准件的调用。
In the basis of parameter, we can get a special part which comes from corresponding parts, finally the designing of standard unit comes true.
本文介绍了电子表夹板零件冲模设计中应解决的几个问题，给出了几种结构参数的选择方法。
This article introduced several problems in the design of punching die for electronic watch champed plate. Provided several select methods of design value.
当所有的参数计算完后，对磨具的装配方案，对主要零件的设计和装配要求技术要求都进行了分析。
When all parameter calculations are over after, requested the technique requests to the design and assemble of the main spare parts to all carry on analysis to the assemble project that whets to have.
本文阐述了CATIA软件的二次开发性能和二次开发方法，总结了基于CATIA的零件模型的参数化设计方法；
This paper illuminates the performance and the method of secondary development of software CATIA, and generalizes the parametric design methods of parts modeling based on CATIA.
从零件的结构和要求入手，结合精冲工艺的特点，论述了离合器板精冲工艺及模具设计时各参数的选取和模具设计的主要技术问。
According to the structure and requirements of the clutch plate part and the characteristics of fine blanking process, the fine blanking process for the clutch plate is proposed.
参数化设计就是用参数来描述零件尺寸。
Parametric design USES parameter to describe part dimension.
用参数化的方法进行面向机械设计的成本评估，同时讨论了基于零件特征的成本分析。
The cost oriented machine design and the methods of cost estimating like parametric estimating, feature based costing are discussed.
复合轮齿空气压缩机CAD／CAM系统由三大模块构成：复合轮齿机构参数化设计模块、压缩机典型零件CAD模块、压缩机典型零件CAM模块。
This system is made up of three parts: compound gear air compressor parameters design module, typical compressor-part CAD module and typical compressor-part CAM module.
通过典型凸轮零件的数控铣削加工，阐述铣床数控改造设计的原理和设计的方法，以及在加工编程设计中参数数据的转换。
The reconstructive principle and the designing way of nc milling machine are expatiated by machining a typical CAM, so does the parameter conversion.
论述了圆孔拉刀全参数化计算机辅助设计软件中有关拉刀各部分尺寸计算，总体程序设计，自动生成零件图及其强度校验的实现方法。
This paper deals with the realization of dimension calculations general programming, parts pattern auto -forming and strength test in the whole parameter CAD Software of the round hole broach.
列举了相关零件的设计步骤，并对在设计过程中所关心的参数给出了一个基于WEB的工程计算模块，从而大大推动了设计过程的顺利进行。
Listing the design processes to a axis, and a calculating model based on WEB is set up for the concern to some parameters related to a axis, which will be sure make the design work convenient.
给出了罩壳零件旋转自动脱螺纹压铸模实用结构，锁模力计算和工艺参数，论述了模具工作原理和设计要点。
The practical structure of die casting mould with the rotational automatic thread demoulding for shell parts, the calculation of mode locking force and the process parameters were presented.
压铸模设计中，根据要压铸零件支架的参数性能要求，设计定模和动模两部分。
Die-casting in the mold design according to toeing die-casting the parameter function request of the spare parts support, design to settle the mold and move two parts of mold.
当所有的参数计算完后，对模具的装配方案，对主要零件的设计和装配要求技术要求都进行了分析。
With all parameters done, analysis on the assembling of the moulds and requirement of main parts design and assembling was made.
盘式制动器的零部件比较多，但由于部分零件为异形不规则结构，并且需要定义的尺寸参数过多，不便于进行参数化设计。
The brake system has many parts, but some of them are irregular structure, and need to define too many size parameters, are not easy to make parametric design.
结合旋转导向钻井工具的结构特征，详细论述了对这种工具进行参数化设计的总体方案设计和设计过程，其中包括零件设计、装配体设计和工程图生成。
Then it presents the overall conceptual design and design procedure of the tool combined with its design feature, including component parts design, assembly design and schedule drawing forming.
为了寻求零件最优的结构参数，作者引入损伤度作为判据，建立了零件优化设计与随机疲劳寿命的联系。
Moreover, the author proposed "damage degree" as a criterion in obtaining the optimum structure parameters. A relationship between the optimum design of mechanical elements and r…
分析多种设计参数对零件疲劳寿命的影响。
Effects of several kinds of parameters such as load, elliptical parameters etc on stress field have been analyzed.
本系统实现了交流接触器的向导式参数化设计，并建立了交流接触器基本零件数据库。
This system realizes the Wizard parametric design of ac contactor, and establishes the basic parts database of ac contactor.
以汽车焊接夹具设计中使用的气缸为例，提出利用MDT建立参数化零件模型。
This paper introduces a way to draw different type cylinder in designing automobile welding jig.
以汽车焊接夹具设计中使用的气缸为例，提出利用MDT建立参数化零件模型。
This paper introduces a way to draw different type cylinder in designing automobile welding jig.
应用推荐