• 室温固化铸造组分聚氨酯浇注制备进行了研究

    The preparation of the two-component casting polyurethane rubber curing at ambient temperature for cast moulds was studied.

    dict.cnki.net

  • 由于浇注设计轨迹达到浇注铸造的一个均匀迅速浇注

    Owing to the design and trajectory of the casting trough, there is achieved an even and rapid pouring from the casting trough to the casting mold.

    ip.com

  • 室温固化铸造组分聚酯多元醇和多异氰酸酯聚酯聚氨酯制备进行了研究

    A type of polyurethane resin cured at room temperature was prepared for making cast mould, which included two components i. e. polyester polyols A and polyisocyanate B.

    dict.cnki.net

  • 各类辅助材料塑料冲压、压铸造粉末冶金标准件、架、

    All types of moulds and auxiliary material : plastic mould, stamping mould, die and diecasting die, powder metallurgy die and mold parts, mold, templates, etc ;

    www.mdplating.com

  • 采用快速原型技术可以方便地制造硅橡胶离心铸造适用生产外形复杂熔点合金微小铸件

    Based on rapid prototyping technology the silicon rubber mold for centrifugal casting is conveniently made. It is suitable for producting small parts made of low fusion point alloy.

    www.chemyq.com

  • 发明涉及一个浇注浇注熔融金属一个铸造方法

    The invention is a casting trough and method for pouring molten metal in a casting mold.

    ip.com

  • 系统解决消失铸造处理系统普通存在投资能耗、 噪音维修维修不方便弊端

    The system may settle abuses of large investment, high energy consumption and much maintain which exist in sand treating system of lost-form casting at large.

    www.chemyq.com

  • 形式尺寸可以通过其它一些工艺来达到比如挤出挤出加工,沙铸造,拉铸造精密铸造

    Form and dimension may also be achieved by a number of alternative processes such as hot or cold extrusion, sand casting, die casting, and precision casting.

    www.mapeng.net

  • 结果表明采用纳米管的消失铸造工艺可以有效地把纳米加入铸铁

    The results showed that the CNT can in effect be added into ductile iron using lost foam cast method.

    danci.911cha.com

  • 采用铸造技术制备了仿古旅游工艺品———铜鼓

    Imitation antique bronze drum for tourism was produced by investment casting.

    zuci.chaziwang.com

  • 铸造方法另一优点可以铸造各种合金复杂铸件特别可以铸造高温合金铸件

    The investment casting method another advantage is that it can casting various alloy castings, especially the complex of high temperature alloy castings can be casting.

    www.hnjspsj.com

  • 利用扫描电镜电子万能试验机研究了复合添加--中间合金铸造ZA27合金组织性能影响

    Effects of Mn and Al-Ti-B on the microstructure and properties of ZA27 alloy prepared by sand-casting technology were studied with the help of SEM and electronic universal testing machine.

    danci.911cha.org

  • 引进消失铸造技术后,迅速稳定生产出合格产品关键

    It is a key to produce the qualified products by Lost Foam Casting Technology.

    dict.cnki.net

  • 采用液相线连续铸造法制备出Y112铝合金固态坯料。

    Semi-solid slurry of Y112 alloy was cast by near liquidus semi-continuous (NLSC).

    www.chemyq.com

  • 消失铸造铸件出现白色缺陷原因进行详细分析,并根据生产实际提出了一些有效预防措施

    Detailed analysis is done to the causes of while defects in lost wax casting. Some effective precautionary measures are proposed based on practical production.

    www.chemyq.com

  • 消失铸造可以应用小型铸造车间技术改造

    Evaporative pattern casting process is suitable for the technology reformation in small or medium size foundry factory.

    www.dictall.com

  • 最后提出消失铸造发展方向

    Finally, the development prospects of lost foam casting are presented.

    http://www.iciba.com

  • 研究了铝合金消失铸造过程中的涂料行为

    The coating behavior of aluminum alloy lost foam casting(LFC) process has been investigated.

    www.dictall.com

  • 铸造经常出现毛刺缺陷造成铸件次品重要原因

    Burr defect often appears on the surface of investment casting and it is the main reason causing inferior produces.

    www.chemyq.com

  • 本文研究涂料保温透气性铝合金消失铸造充填能力影响

    In this paper the influence of the coating properties on aluminum alloy fillability in lost foam casting process with unbonded sand is studied.

    dict.cnki.net

  • 涡轮导向器型号航天发动机关键部件采用K465铸造高温合金无余量整体熔铸造成。

    The nozzle, which is cast in K465 cast superalloy by investment casting, is one of the key components of the airspace engine.

    www.dictall.com

  • 公司拥有十分完善铸造生产设备机加工设备先进理化分忻

    I have a very sound investment casting production equipment, machining equipment and advanced physical and chemical FENXI.

    dict.cn

  • 试验研究了浇注型腔压力消失铸造表面状态力学性能影响趋势。

    Influence of pressure applied on the mold after pouring on the surface status and mechanical properties of aluminum castings in lost foam casting is investigated.

    www.chemyq.com

  • 铸造砂眼缺陷产生因素进行分析

    Carried on the analysis to the lost wax casting craft sand hole defect creation factor.

    dict.cnki.net

  • 重点介绍喷嘴铸造基本工艺过程主要工艺参数

    The basic technical process and main processing parameter of investment casting nozzles are presented in detail.

    www.chemyq.com

  • 展示了中大型工艺品采用消失铸造优越性

    The superiority to manufacturing middle-large art casting in lost foam casting is presented.

    http://www.iciba.com

  • 利用消失铸造压力凝固技术增强AZ91D镁合金补缩能力

    Feeding capacity of AZ91D magnesium alloy is enhanced by using pressure solidification in lost foam casting(LFC).

    www.dictall.com

  • 风机部件创造采用腔室压力铸造工艺

    The fan component is produced using cold chamber pressure die casting process.

    zsws.92doc.com

  • 介绍利用SLS技术制作精密铸造通过铸造快速获得金属零件工艺方法零件相应性能分析

    Lost wax pattern for making using SLS and technology of rapidly manufacturing metal part in investment casting are introduced. The corresponding properties of the metal parts are analyzed.

    www.chemyq.com

  • 介绍利用SLS技术制作精密铸造通过铸造快速获得金属零件工艺方法零件相应性能分析

    Lost wax pattern for making using SLS and technology of rapidly manufacturing metal part in investment casting are introduced. The corresponding properties of the metal parts are analyzed.

    www.chemyq.com

$firstVoiceSent
- 来自原声例句
小调查
请问您想要如何调整此模块?

感谢您的反馈,我们会尽快进行适当修改!
进来说说原因吧 确定
小调查
请问您想要如何调整此模块?

感谢您的反馈,我们会尽快进行适当修改!
进来说说原因吧 确定