或由于钢杆变形根本就上下活动不自由。
Or simply because the upper and lower steel bar deformed activities are not free.
在游梁式抽油机上使旋转的平衡块与游梁相连的钢杆。
The steel beam that connects the rotary counterbalance with the walking beam on a beam pumping unit.
钢杆,钢骨,双金套手柄,色丁布伞面,透明膜包装,晴雨兼用。
Steel pole, steel ribs, golden handle, sadin cloth cover, translucent plastic film packing, both for rainy and sunny use.
钢杆,玻纤伞骨,彩晶柄手柄,花尼伞面,透明膜包装,晴雨兼用。
Steel pole, fibreglass ribs, colorful crystal handle, colorful nylon cloth cover, translucent plastic film packing, both for rainy and sunny use.
在第一部分,学生要用为此特制的实验仪器对一根普通预应力钢杆做拉力实验。
In the first part of the experiment, students will subject an ordinary steel reinforcing rod to a tension test using a testing machine designed specifically for that purpose.
结果表明:在拉伸外荷载作用下,灌浆体对玻璃钢杆的剪应力并不随杆体长度均匀分布;
The study results show that: the shear of grout on FRP rods does not vary uniformly with the length of rod;
新开发研制的碳纤维复合柔性连续抽油杆克服了普通钢杆的缺点,能够满足低渗油田小泵深抽技术的要求。
The new developing carbon fiber compound flexible coiled rod overcome the shortcoming of ordinary steel rod, can meet the need of low permeability oilfield production.
这里,她 bust(ruin completely)everybone, stab(刺伤,用刀等捅) herselfinthechest,shovea two-footsteelrodthrough herneck(把一个两脚钢杆穿过脖子),but with noscratchon her看起来就很像这种表演。
I have busted, like, every bone in my body, stabbed myself in the chest, I've shoved a two-foot steel rod through my neck, and l don't have a scratch on me.
阀杆应该是以镀镉钢合金或316不锈钢作为标准配置。备选的阀杆材料可以根据要求提供,例如,钛,不锈钢,等等。
The shaft shall be cadmium-plated steel alloy or 316 stainless steel as standard equipment. Optional shaft materials shall be available on request, i. e. , titanium, stainless steel, etc.
固定板的钢具有两种功能,保留套管和防止杆旋转。
The steel retaining plate has two functions, retaining the bushing and preventing rod rotation.
本文对截面部分进入塑性的钢偏压杆腹板的屈曲进行了研究。
This paper deals with the local buckling of beam-column with partial yielding of its section.
阀杆和填料密封装置同样采用不锈钢,具有耐腐蚀性能。
The stem and packing gland are also stainless steel for corrosion protection.
温润303不锈钢活塞杆。
高强度钢(100,000防扩散的最低收益率)活塞杆有一个理由,打磨,表面镀铬。
The high strength steel (100,000 psi minimum yield) piston rod has a ground, polished, and chrome plated surface.
采用以尿素为主要原料的液体软氨化工艺,对阀杆(35钢)进行了氮化处理。
The valve rod (steel 35) is nitrided in the fluid soft nitriding process, the main material being made up of urea.
本文介绍了该钢箱杆件的制造工艺及不需焊后矫正就能达到规范要求的变形控制措施。
Fabrication technology and deformation control measures, which can meet requirements of specifications without need of corrections after welding, for the steel box members are expounded.
这种阀门应该是黄铜阀体,不锈钢阀杆和弹簧。
Valve shall have a brass body and stainless steel stem and spring.
因此,用纤维增聚合物锚杆代替钢锚杆为锚固技术在岩土工程中的应用开辟了广阔的前景。
So the fiber reinforced plastic bar anchors can make the anchoring techniques have a more wide range of rock engineering applications.
并与双钢球增力机构与无杆液压缸组成的液压夹具系统进行了比较。
It was compared with that system consisting of double-ball amplifier and rodless hydraulic cylinder.
阀杆应该是400系列不锈钢,不能将阀杆暴露在蝶板紧固件上。
Stem should be 400 series stainless steel, can not stem exposed to the butterfly plate fasteners.
分析了真空白耗电弧炉铜-不锈钢异种金属套管式电极杆焊接裂纹产生的机理。
The mechanism of welding crack generation in the copper - stainless steel tube electrode stem of Vacuum Consumable Arc Furnace has been analyzed.
本文还介绍了中国煤矿玻璃钢锚杆的应用情况。
The application situation of FRP bolt at coal mines in China is also involved in.
对该桥的边墩接头、系杆锚固键、钢混凝土接头及前次横梁等部分结构的细节设计做简要介绍。
The structure details such as the joint of side pier, anchor key of ties, steel-concrete transition section and front minor cross beam are introduced.
介绍了神钢7100履带吊臂杆桁杆的修理过程,提出臂杆更换中的注意要点,为起重机臂杆桁杆修理提供借鉴。
This paper introduces the overhaul procedure of Shengang7100 crawler-type crane boom trussed pole, proposes the attention point during exchanging the crane boom trussed pole.
大跨度穹顶建筑物多采用钢桁架体系,钢桁架的杆件一般采用圆钢管,弦杆为曲线。
The long span dome structure are mostly steel truss structure. The member of steel truss are almost round steel tube, and curve chord.
阀杆材质,力求不锈钢阀杆(2cr13),大口径阀门也应是不锈钢嵌包的阀杆。
Stem material, and strive to stainless steel stem (2cr13), large diameter valves also should be embedded in the package of stainless steel valve stem.
《钢结构设计规范》(GB50017—2003)提出对单轴对称截面钢压杆的弯扭屈曲需做单独验算。
Struts of singly symmetric section need to be checked on flexural torsional buckling, according to the current code for steel structure (GB50017—2003).
《钢结构设计规范》(GB50017—2003)提出对单轴对称截面钢压杆的弯扭屈曲需做单独验算。
Struts of singly symmetric section need to be checked on flexural torsional buckling, according to the current code for steel structure (GB50017—2003).
应用推荐