本文采用个体跨期最优模型，通过计算劳动力供给跨期弹性，分析新法对劳动力供给的影响。
This study adopts an individual intertemporal optimal model to analyze the effects of the new Labor Contract Law on labor supply by calculating intertemporal elasticity of labor supply.
采用弹性球-弹性杆的纤维运动模型，建立了纺粘法生产断裂纤维的运动方程；
The motion equation of spunbonded broken fiber was established using an elastic sphere-elastic rod motion model.
采用线弹簧型弱界面模型来模拟柔性涂层，研究柔性涂层对复合材料宏观弹性模量的影响。
The effect of soft coatings on the elastic moduli of composite materials is studied, in which the coating is modeled by a linear spring type imperfect interface.
采用大曲率梁理论和弹性基础梁带理论，建立潜艇特殊舱段结构的力学模型。
According to the theory of curve beam and elastic foundation beam, a mechanic model for the structure of a special submarine cabin is developed.
采用虚拟裂缝模型结合线弹性断裂力学的方法，分析了RPC（活性粉末混凝土）及纤维增强RPC的断裂特性；
The fracture properties of RPC(Reactive Powder Concrete) and fibre RPC are analyzed by the Fictitious Crack Model(FCM) and the linear elastic fracture mechanics.
模型将圆形地连墙和环形内衬当作线弹性材料，土体采用D - P准则。
The model considered the circular diaphragm wall and circular lining as elastic material, and the soil as D-P model.
粘弹性分析采用特殊的三元素标准线性固体模型拟合实验数据。
Viscoelasticity was analyzed by the special three element standard linear solid model.
基于磁致伸缩的概念，采用磁致伸缩应变模型，对横向磁场中铁磁体的磁弹性屈曲的临界磁场这一问题进行了研究。
Based on the idea of magnetic strain, the model of magnetic strain was used to analysis the magnetoelastic buckling of cantilevered ferromagnetic plate in transverse magnetic field.
本文采用零维边界元，处理组合体弹性联接，使计算模型符合实际边界约束。
In this paper the Zero-dimensional bound element is applied to dispose of elastic join of combinations 'o that the calculating model will accord with the actual bound binding.
对于居民消费结构分析，现广泛采用扩展线性支出系统模型进行统计分析，并计算出各类商品的需求弹性。
Related to residential consumption analysis, extend linear expenditure system (ELES) is widely used in statistics analysis, and calculating the demand elasticity of various commodities.
计算中采用考虑围岩松动圈的双介质模型，反演松动圈的弹性模量。
Taking into account rock loosing zone, the two-medium model is adopted in the computation.
本文比较了几种计算血管壁切应力的方法，认为采用有约束的弹性管模型计算获得的动脉壁切应力更适合于临床应用。
Several methods of calculating arterial wall shear stress are compared in this paper, and the restricted elasticity model is more adapt to clinical application.
对包含中等尺寸的成组分布裂隙的岩体，采用岩体几何损伤本构模型，用监测位移反馈分析法同时辨识岩体弹性模量、地应力及损伤参数。
In this paper, for the joint rock mass with medial size and in-group crack, parameter identification of its geometrical damage model is studied by back analysis of in-situ measured displacement.
比较分析了各种计算GDP就业弹性的方法，认为采用双对数计量模型是测算就业弹性的最好方法。
Based on a comparison of different ways for estimating employment elasticity of GDP, this paper concludes that the double logarithm model is the best method.
粘弹性阻尼器采用开尔文模型，将其对结构的作用看作是位移和速度的反馈控制。
The viscoelastic damper was described by the Kelvin model and its action to the platform was regarded as the feedback of displacement and velocity of the response.
采用施加在轨道上的一系列移动轴荷载模拟列车作用，利用轨道结构连续弹性双层梁模型，计算出某城市地铁列车运行产生的轨枕与隧道之间的作用力。
Using the continuous elastic double layers beam model of track structure, the forces between the sleepers and the tunnel inlay produced by the running of certain subway train were calculated.
以一高层连体结构为例，采用不同计算模型的有限元计算分析程序，对该结构进行详细的弹性及弹塑性计算分析。
By using the different calculation models of SATWE and ETABS of finite element, the elastic and plastic properties of the high-rise connected structure are analyzed and calculated in details.
采用完全非弹性蹦球模型分析了颗粒对容器底的冲击力，并给出了倍周期分岔现象的一种解释。
Based on a completely inelastic bouncing ball model, a possible explanation for the bifurcation phenomena is presented.
采用详细模型对系统进行了模态分析和均匀温升热弹性分析。
The mode and uniform soaking thermal-elasticity are analyzed through the detailed model.
模型生物材料特性分别采用弹性和粘弹性模型描述。
Elasticity and viscoelasticity material models were used to characterize the material feature of the human brain.
从工程实践出发，采用粘弹性两相介质模型，详细研究了地震波在准饱水岩层中的传播问题。
Considering engineering practice, seismic wave propagation in nearly saturated rock is studied by using the viscoelastic two-phase model.
研究了非线性弹性转子-轴承系统的轴心轨迹，认为对称不平衡转子是连续弹性轴，它两端支撑在滑动轴承上，油膜反力采用非线性短轴承模型。
With reference to a symmetrical unbalanced rotor treated as a continuous elastic shaft suPPorted at its end by lubricated journal bearings, the short bearing model is adoPted.
以弹性小挠度理论，采用能量法建立了较简便实用的轧后带材失稳判别模型。
The more practical and simple distinguishing model, ofthe rolled strip's stabilization is set up with energy method that depends on small-deflection elastic theory.
采用弹性理论方法，建立了预应力碳纤维布加固钢筋混凝土梁在放张和承载后界面剪应力的理论计算模型。
A calculation model for the interfacial shear stress of the reinforced concrete beam strengthened with prestressed CFRP sheets was built based on the elasticity theory after releasing and loading.
拉伸弹性模量与压缩弹性模量有明显差异，木质部属各向异性材料，建立力学模型应采用各向异性的本构关系。
There is a distinct difference between tensile and compressive modulus. Xylem is a kind of anisotropic material and modeling its mechanical model needs anisotropic constitutive relations.
粘弹性采用常复数模型，用求解复特征值的方法求得了其固有频率和损耗因子。
The constant complex module of viscoelastic material is used to calculate the frequency and loss factor of the sandwich pate by the complex eigenvalue method.
另外主要编制了飞机风挡材料采用的具有应变率效应的非线性粘弹性朱-王-唐本构模型，结果能很好地对朱-王-唐模型进行描述，特别是应变率对该模型的影响。
Nonlinear viscoelastic's ZWT constitutive model which used in aircraft windshield and has a strain rate dependence is written, and ZWT is described point-device, especially, effect in stain rate.
提出了大行程柔性铰链基于刚度方程的弹性模型，采用刚度组集的方法并通过建立协调方程，构建得到整体系统的刚度模型。
The elastic model based on the stiffness equation is presented, and the stiffness model of the whole structure is constructed via the stiffness assembly and coordination equation.
采用双层规划模型描述弹性需求条件下的连续平衡网络设计问题，设计了近似解的启发式算法。
A bilevel programming model and heuristic solution algorithm is proposed to model the continuous equilibrium network design problem with elastic demand.
对于弹性膜片的动态行为，可采用偏微分方程建立其动态行为模型。
Meanwhile, partial differential equations are usd for modeling dynamic behavior of diaphragm.
应用推荐