采用可编程控制器实现设备自动操作。
第二层联锁机采用可编程控制器（PLC）S7-300。
Theprogrammable controller (PLC) S7-300 is applied in the second layer.
采用可编程控制器对其改造，便可减少故障，提高开机率。
Using PLC to transform electric control system can reduce accidents and raise efficiency.
采用可编程控制器进行控制，提高了拉丝机的可靠性和产品质量。
Applying PLC to its control has improved the security of the drawbench and the quality of products.
采用可编程控制器调节电机转速实现消防供水系统压力的自动控制。
By adjusting the rotational speed of motor, it can control the pressure of fire fighting watering system automatically with PLC.
采用可编程控制器自动控制生产程序、压辊温度、传动速度等技术参数。
It can be equipped with programmable controller to materialize auto monitor production procedure, embossment roller temperature, driving speed and so on.
本文采用可编程控制器(P LC)为主要控制元件，研制出一台成型控制装置。
A molding control device is designed using Programmable Controller (PLC) as a primary controlling component.
采用可编程控制器在汽车后桥壳加强环、后盖自动焊接工艺中实现逻辑顺序控制。
Using the programmable controller in the automobile rear axle house ring stiffener, logic sequential control was realized in the top plate automatic welding craft.
通过对催化气压机控制系统的研究与改进，成功地采用可编程控制器LOGO ！
On the basis of studying the control system of the catalytic gas compressor, a model that adopts the smart PLC LOGO!
分析钢管环缝焊接生产线的组成，并采用可编程控制器技术对生产线进行自动控制。
Analyses the constitution of steel pipe wreath sews welding production line, and adopt the PLC technique to control the production line with automation.
采用可编程控制器(PLC)直接控制液压伺服阀，可以简化控制系统，降低成本。
Direct control of hydraulic servo valve by means of PLC can simplify the control of hydraulic system and reduce cost.
采用可编程控制器(P LC)控制有助于提高三偏心蝶阀喷焊质量与系统稳定性。
Applying PLC to the plasma spray welding system was helpful for enhancing the quality of triple eccentric butterfly valve and the system stability.
在电气控制系统中采用可编程控制器，实现了装煤车从煤塔取煤到顺序装煤的自动控制。
The adoption of programmable controller in the electric control system realized the automatic control from the reception of coal from coal bunker to the sequential charging of the charging car.
采用可编程控制器(PLC)控制钠离子交换装置，可实现无人化管理的连续软化水生产。
With PLC controlled sodium ion exchange device, the unmanned continuous production of softened water can be realized.
下位机采用可编程控制器（PLC），用于实现运动控制、阀门等动作控制、定时和传感器数据采集。
The lower machine used PLC to realize motion control, action control such as valve control, timing and data acquisition from sensors.
根据某厂对专用铣床的电气控制系统所提出的改造要求，采用可编程控制器进行控制，取得了很好的效果。
Aimed at the rebuilding require of the electric control system of the special purpose of milling machine, the application of PLC was introduced, this control system acquires good effect.
对采用可编程控制器的小型汽轮机保护系统常出现的几种误动进行了分析，并且提出了切实可行的改进方案。
This paper analyses the little steam wheel machine with programmable controller, and puts forward some practical plans for improvement.
它采用可编程控制器(PLC)作为系统的运算控制核心，利用液压式压力发生器，实现了测量点处无电气量。
It utilized hydraulic press transducer and adopted PLC as the core of the system, which realized no electrical quantity at measure point.
采用可编程控制器（PLC）的联网功能，构成一个MELSECNET／MINI网络，用于控制闪光对焊机组。
The paper introduced a PLC network (MELSECNET/MINI)control system which is used for controlling flash butt welding machine set.
叙述了某大型辊底式炉在轴承套圈余热退火过程中，采用可编程控制器(PLC)作为控制核心，自动进行工作的机械液压传动控制系统的组成、PLC软件设计及编制。
The authors describe the constituent of hydraulic control system and the design of PLC software for some large roller hearth furnace with PLCs as its control centre for annealing bearing RACES.
控制系统采用西门子公司S7- 300系列可编程控制器组成分布式的体系结构。
Control system adopt controller can programmed which compose distributed structure belong to Siemens Corp. S7-300 series.
所有可编程控制器(plc)和处理器应采用植入目标链接(ole)的过程控制(opc)协议，以便与中央控制和数据处理系统的通讯。
All Programmable Logic Controllers (PLC) and Processors shall use Object Link Embedded (OLE) process control (OPC) protocol to facilitate communication to a central control and data processing system.
采用直流调速器和可编程控制器的结合来实现飞锯机模拟。
In this system, the PLC and the DC speed-regulator are combined to simulate the operation of flying saw machine.
人机界面、可编程控制器、温控模块、变频器采用进口产品。
Man-machine interface, programmable controller, tem-controller and frequency converter are of import brand.
整个系统采用了SLC500可编程控制器、触摸屏、安全光幕控制器等控制部件，为机床提供了安全可靠的装配质量保证。
The whole system adopts control components such as SLC500 programmable controller, touch screen, safety light curtain etc. Then safety and reliable assembly quality is ensured.
通过现场应用说明了锅炉点控制系统由于采用了以PLC为核心的可编程控制器，使点火系统得到了简化，可靠性大为增强。
Through field application, the boiler ignition control system that adopts the PLC programmable controller can simplify the ignition system, and its reliability strengthens further.
文章介绍了采用PLC(可编程控制器)技术对石化工业配电系统进行先进的程序控制。
In this paper, Advanced Program Control of PLC is described in distribution system for Petro-Chemical industry.
采用触摸屏和可编程控制器，用触摸屏键控制设定和测试并显示试验时间、试验温度、自动放水和进水等性能指标。
It adopts touch screen and programmable controller. The keyboard can be used to control and set test time, test temperature, water and etc.
本系统采用触摸、可编程控制器和称重仪表等构成全自动集散控制。
The system contains touchable, programmable controller and weighing instrument, realizing automatic distributed control.
本系统采用触摸、可编程控制器和称重仪表等构成全自动集散控制。
The system contains touchable, programmable controller and weighing instrument, realizing automatic distributed control.
应用推荐