对定向井有杆泵采油设计进行了研究，提出了优化设计的原理和方法，建立了定向井有杆泵采油设计模型。
Based on the research of oil production design of beam bump in directional Wells, we bring forward the principle and method for optimization and set the design model for oil production.
BP的报告总结认为，最备受争议的油井设计，也就是采油套管设计是合理的，不是导致失败的原因。
The BP report concludes that the most criticised well-design choice, known as a long string, was a reasonable one and did not lead to the failure.
因此，冰区固定采油平台的设计以及对服役期平台的评估，均需进行可靠性分析，而且主要是极端冰载作用下断裂的可靠性分析。
Therefore, reliability analysis, especially fracture reliability analysis, for the design of fixed production platforms in ice environment or under extreme ice loads is required to be conducted.
主要包括部分内容：一是电子重组理论分析； 二是采油工艺设计业务电子重组实践。
There are two parts discussed in this desertion: one is analysis of electronic reengineering theory, and the other is practice of electronic reengineering.
第三步，电子重组后，形成新的采油工艺设计业务。
Third step is to make a conclusion of the new process that is reengineered.
及设施装备和采油工艺流程的设计。
The Equipment and the design of production process are also described in this article.
有杆泵抽油是世界采油工程中一直占主导地位的机械采油方式，系统动态模拟是系统效率分析和优化设计的基础。
The rod pumping is the predominance mechanical recovery mode in world petroleum production, the system dynamical simulation is the base of system efficiency analysis and optimum design.
目的解决深井气举采油过程中不同流动型态的压力梯度、持液率、混合物密度对气举井设计和运行影响的问题。
Aim To resolve the influence of pressure gradient, liquid hold-up and mixture density of the different flow model on the design and operation of gas-lift well in oil recovery.
基于单片机设计了采油井石油产量的多路循环计量系统，阐述了该系统的计量原理及工艺过程，给出了计量系统的软、硬件设计。
Multiplex cycle metering system of petroleum output is designed based on single chip, which includes the designs of hardware and software. Metering principle and process are formulated.
鉴于水平井开采油田的优点及其适应性，考虑在锦45 - 32 - 18块大凌河油层设计、部署一口水平井。
As many advantages and adaptive capacity in horizontal well development, so we consider designing and deploying a horizontal well at JIN 45-32-18 block da Ling He reservoir.
应用该方法对南海W12 - 1海洋采油平台进行模型设计，得到较为满意的相似模型。
An actual model is designed for W12-1 offshore production platform sited in South China Sea using this method and a satisfactory result is obtained.
其次，根据油田抽油机采油控制系统的工作特点和技术要求，对系统的硬件电路进行了深入细致的设计研究。
Secondly, considering the working characteristic of the control system for oil extraction and specific requirement, the research of the system's hardware is carried on thoroughly and particularly.
该实用新型设计新颖、结构紧凑，适用于各种单螺杆泵采油系统。
The utility model has the advantages of novel design and compact structure, being suitable for various single-screw pump oil extraction systems.
针对江苏油田部分油井位于洪泽湖区泄洪道上的特点，设计了一种湖区采油平台。
Aim at the characteristics that parts of oil Wells of oil-field in Jiangsu locate the Hongze area floodway in the lake, which designed a kind of lake area oil extraction terrace.
本论文为三次采油技术中注聚泵的设计提供了理论依据，而且还能为其它工业化工用泵研究提供一定的参考和指导。
So this paper provides a theoretical basis of designing the polymer injection pump used in eor, it also provides a reference and research guide for other industrial chemical pump system.
所介绍的方法，在让井方式、驱动原理和配重形式等方面为新型地面采油设备的设计创出一条新路。
These methods set up a new pathway for the design of new pumping unit in automatically removing the pumping unit, driving principle and the forming balance weight.
结合先前的设计经验，本文对大排量lb1600螺杆泵采油系统进行了设计计算。
In this paper, LB1600 screw pump system has been designed and calculated combination of the previous design experience.
并根据井组模拟结果，应用采油工程理论，对现场试验井进行了排水采油工艺设计。
According to the well group simulation results, we has designed water drainage-oil production technology for field proving well by applying the production engineering theory.
通过数值模拟优化、热力开采设计及相应的采油工艺配套设计，确定了合理开发对策，取得了较好开发效果。
Through optimization of numerical simulation, thermal recovery design and corresponding oil recovery technology, the reasonable development policy is determined and some good results have been gained.
本文的设计思路对今后无杆泵采油等类似问题具有启发作用。
This design thinking may have inspirement for similar non-rod pump production from now on.
为此，本文设计了螺杆泵用新型多星形移相变极电机，使得螺杆泵采油系统工作效率进一步提高，同时可以减少了变速装置。
To settle the problem, a novel energy-saving motor used in screw pump was designed, and this motor could make efficiency of screw pump oil system improved and variable speed device decreasing.
针对这一问题，研究设计新型双筒式小直径抽油泵，进行了深抽采油工艺技术的试验研究，获得了成功，取得了良好的经济及社会效益。
In accordance with this problem, a new pump of small diameter with double barrel has been developed. Experimental study of the deep pumping process has been conducted and attained a success.
基于这种情况，胜利油田采油院设计加工了热采水平井蒸汽流量自调节装置。
Based on this situation, Shengli Oilfield institute Research design and processing of thermal horizontal well steam flow Self-adjusting device.
根据采油车的作业流程，设计开发出了一种采油车作业的自动控制系统。
According to operating process of trailer mounted pumping unit, an auto control operation system of trailer mounted pumping unit is developed.
根据采油车的作业流程，设计开发出了一种采油车作业的自动控制系统。
According to operating process of trailer mounted pumping unit, an auto control operation system of trailer mounted pumping unit is developed.
应用推荐