为该连铸机结晶器振动机构采用高频率振动提供依据。
It can provide theoretic base ground for the mechanism using high frequency.
本文主要介绍了唐钢薄板坯连铸机结晶器漏钢预报系统的功能算法。
This paper mainly introduces the mould breakout detection system function arithmetic of thin slab caster in Tang Steel.
本文简介兰钢薄板坯连铸机结晶器和铸坯导向段的工艺参数及设备特点。
The process parameters and features of the equipments are briefly desecribed with regard to the mould and slab steering section of the thin slab continuous caster at Lanzhou Ion&Steel Works;
本文介绍了方坯连铸机结晶器液压振动控制系统及监测系统的组成和功能。
This paper studies the structure and function of remote monitoring system about Billet Caster's hydraulic crystallizer.
针对本钢1600板坯连铸机结晶器振动装置的结构和性能进行了详细地分析和论述。
The paper discusses in detail the structure and performance of crystallizer oscillating equipment for 1600 slab continuous caster in Benxi Steel and Iron Incorpcration.
为提高连铸坯的质量，提高经济效益，对连铸机结晶器的液面进行检测控制十分必要。
It is necessary to detect and control the mould level for improving slab quality and economic benefit.
通过水力模型实验，研究了水口结构对南钢板坯连铸机结晶器内钢水流动特性的影响。
The present paper studies the effect of structure of the submerged nozzle on the flow ability of the liquid steel in the mold of the slab continuous caster.
根据板坯连铸机结晶器的振动规律，设计并实现了结晶器振动参数在线辨识及其计算软件。
According to the vibration regularity of slab caster mold, the software of on line detecting and calculating parameters for the crystal mold vibration is designed and realized.
结合宝钢3号连铸机结晶器生产数据，对模型进行了验证，所得计算结果符合实际测量值。
The simulation was validated by the actual operation data of No. 3 continuous caster at Baosteel. The agreement was very well.
本论文研究的是模糊pid复合自适应控制系统在包钢连铸机结晶器液位控制中的设计及应用。
This paper mainly researches the design and application of the Fuzzy-PID complex compound adaptive control method for the continuous casting mould level control in Baotou steel corporation.
在济钢ASP1700薄板坯连铸连轧项目中，连铸机结晶器调宽系统采用了新型全数字交流伺服控制系统，代表当今世界最先进控制水平。
In the project of ASP1700 thin slab continuous casting and rolling, the system of mould width adjust in the continuous casting is equipped with the new digital alternating servo control system.
分析认为，济钢大板坯连铸机出现粘结漏钢的原因是保护渣的性能不良，其中液渣层厚度、渣耗量及玻璃相比例偏低，以及结晶器液面波动，拉速提升过快等。
Analysis consider that the reason of breakout by sticking is bad capability of the powder, such as lower depth of liquid powder, less consumption and low proportion of glass phase in the powder.
介绍结晶器液面自动控制技术在连铸机上的应用。
The paper introduces the application of automatic level control in caster mould.
结晶器及其激振系统是连铸机中的重要组成部分。
The mold and its oscillation system are the important part of the caster.
介绍了除结晶器以外连铸机的主要部件上所采用的各种检测仪表，以及它们对连铸机操作及连铸坯质量的作用。
This paper reviews instruments used on major components of continuous caster beside mold, their effect on the design and operation of continuous caster and quality of slab.
本文论述了各种弧型小方坯连铸机用结晶器的结构特点和工艺要求，比较了各种结构的优缺点。
The structural features and technological requirements of moulds used in various kinds of curved spray billet continuous casting machines are discussed and compared in this paper.
弗洛·朗热钢铁厂板坯连铸机上安装的结晶器振动装置灵活可靠。
Mould oscillation installed on the slab caster at Florange is very flexible.
根据板坯连铸机的运行机理，设计实现了结晶器振动状态在线监测系统。
According to the mechanism of the slab caster, an on line oscillation monitoring system of the slab caster mold has been designed and realized.
结晶器在连铸设备中是非常重要的部件，形象地称之为连铸机的“心脏”，而铜板又是结晶器的关键件。
The mould is a very important part of the continuous casting equipments, it is looked as the "heart" of the continuous casting, and the copperplate is the key piece of the mould.
漏斗形结晶器是薄板坯连铸机的重要设备。
The funnel mould is one of the important equipments of the thin-slab continuous casters.
结晶器是连铸机中一个非常关键的设备，结晶器的断面尺寸和锥度是结晶器设计中最重要的参数。
The cross-sectional dimension and taper are the most important data in the design of the mould.
本文以板坯连铸机为研究对象，对液压振动条件下结晶器和铸坯间的瞬态摩擦力进行测试和分析。
Based on a slab caster which is equipped by hydraulic oscillators, the transient friction force between mould and strand shell was measured and analyzed.
介绍了包钢圆坯连铸机采用结晶器电磁搅拌的应用实践。
The application of MEMS in round bloom caster at Baotou Steel was introduced.
在连铸过程中，结晶器锥度对提高连铸机的产量、改善铸坯质量、延长结晶器的寿命都起着决定性的作用。
During continuous casting, the casting mold taper plays a decisive part in increasing the output of continuous caster, improving quality of casting slab and prolonging service life of casting mold.
基于液压振动装置的板坯连铸机，对结晶器摩擦力进行了瞬态检测，分析了结晶器摩擦力的周期行为特点。
Based on a slab caster equipped with hydraulic oscillators, the transient mould friction force was measured, and the characteristics of periodical behavior of mould friction force is discussed.
结晶器是连铸机的核心部件，完成将钢液初步凝固成型的任务。
The mould is the core component of continuous caster for primary cooling and initial shell forming of liquid steel.
在半板簧结晶器振动试验装置上，模拟了小方坯连铸机的非正弦振动。
The non-sinusoidal mould oscillation of machine was simulated at a half plank spring mould tester. The developed hydrauli…
在半板簧结晶器振动试验装置上，模拟了小方坯连铸机的非正弦振动。
The non-sinusoidal mould oscillation of machine was simulated at a half plank spring mould tester. The …
在半板簧结晶器振动试验装置上，模拟了小方坯连铸机的非正弦振动。
The non-sinusoidal mould oscillation of machine was simulated at a half plank spring mould tester. The …
应用推荐