本文将曲面造型与数值计算有机的结合在一起应用到离心泵叶轮的优化设计中。
In this paper, an organic combination of surface molding and numerical calculation is applied to optimization design for centrifugal pump impellers.
采用整体有限元模型计算与设计优化相结合的方法，可以在满足各项设计要求的条件下找到最优预应力设计方案。
The optimized design scheme could be found out to content requirements of design by a method combining calculation of finite element model and optimized design.
为了优化冷却效果，建筑体与窗户开口的形状和大小都是根据计算机模拟被设计成最佳的方式来捕捉清风。
To optimize the cooling effect, the building mass and window openings were shaped and sized to best capture the breezes based on Computer Generated Simulations.
介绍了北京钢铁研究总院采用计算机仿真技术与计算机辅助设计技术，开发出具有优化功能的钢管冷拔过程CAD系统通用软件。
The paper introduces CAD system of steel tube cold drawing process which is a software with optimum function developed by Iron & steel General Institute on basis of computer imitation technology.
本文阐述了一个基于动态数学模型及启发式优化策略的连续加热炉计算机控制系统的设计与实施。
The design and implementation of reheating furnace computer control system based on the dynamic mathematical model and the heuristic optimization strategy is discussed in this paper.
本文主要研究了导管架海洋平台结构系统优化设计的理论与数值计算方法。
The theoretical and numerical methods of structural design optimization for offshore platforms are studied in this thesis.
通过计算机接口软件模块的优化设计，加快了数据处理的速度，同时便于数据的后续处理与加工。
Furthermore, the speed of data processing is increased, and available for subsequent processing and handling on account of the optimizing design of computer interface software module.
本文对周期波导中波传播与振动局部化的分析方法和计算结果可用于结构的优化设计。
The method and results in this paper for solving the problem of wave and vibration mode localization in periodic wave guide can be used in the optimum design of such kind of structure.
通过设计一个平方和函数，使蜡沉积速率的计算值与实测值的残差平方和为最小的优化数学模型成为一个无约束的非线性规划问题。
The paper designs a sum of square function, which is an optimization mathematical model that makes the residual sum of squares of wax deposition rate between the calculated and the measured minimum.
计算结果表明，这些模糊控制值与相应工况的优化设计值的相对误差除两个工况外均小于5 %。
The results show that the relative errors between the fuzzy control values and the corresponding optimized design values are less than 5% except two engine work status.
笔者将数学规划理论与计算机程序设计方法相结合，通过实例对多股螺旋弹簧的计算机辅助优化设计进行了初步探讨。
The disquisition pilot study about the computer assisted optimization design of a screw spring of many radices using math layout theory conjoint to computer programmer method with a exemplity.
实例数值计算结果表明，灵敏度分析法对接触器结构设计参数的局部调整与优化设计提供了一条有效途径与理论依据。
The calculated result shows that the sensitivity analysis method gives convenience and a theoretical basis for the partial adjustment of the contactor structure design parameter and optimum design.
结合包装工程学科的有关领域，论述了计算机辅助包装设计、分析与优化的若干进展，介绍了网络辅助包装设计技术。
This paper discusses the advance of computer aided design, analysis and optimum in packaging engineering, and introduces the technology of net aided packaging design.
在可调减振器的设计基础上，分别对车辆阻尼优化前后进行了试验，分析了车身与驾驶员座椅处的振动特性，计算与试验基本吻合。
A turnable damping was designed, and based on these, the road tests were done, analytical study on vibration performances of passenger seat were carried out, and the results were accordant.
从改进气动载荷分布和边界层特性着手，研制一套可供叶栅优化设计与改型的计算方法与程序。
A set of numerical calculation methods and correspondent software are developed for the optimized design of turbo cascade profiles.
单舵销半平衡舵的舵杆与挂舵臂的匹配设计需要提取的数据量较大，计算及优化过程也较为复杂。
The data collection in matching design between rudder stock and rudder horn of single rudder pintle semi-balanced rudder is massive, and its calculation and optimization is complex.
针对机床产品结构动力学分析与优化设计的需要，进行了某型号精密卧式加工中心数字化性能与优化设计的分析计算。
According to dynamic analysis and optimal design of machine tool structure, digital analysis and optimal design of some model of precision horizontal MC was developed.
根据国内许多行业计算机网络集成综合布线工程的方案设计与施工实践，提出较为优化的结构布线设计方案。
According to the domestic many computer network integration synthesis wiring plan design and construction practice, proposed optimizes structure wiring design proposal.
本文概述了管壳式换热器的设计计算及最优化的电算过程与结果。
The computer applications to design and rating of shell-and-tube heat exchangers, and their optimum procedures as well as calculation results are outlined in this paper.
鉴于此，论文旨在形成一个用于材料经验设计的数据软计算建模与优化框架。
The goal of this work is to develop a systematic data-driven modeling and optimization framework for empirical design of material, so it focuses on solving the following problems.
计算机通信网的路由选择优化问题和容量与流量分配(CFA)问题始终是计算机通信网设计、建设过程中重要而复杂的两个问题。
Route selection, capacity and flow assignment (CFA) are always the important and complex problems during the design and construction of computer communication networks.
电磁结构设计中，采用电磁场解析计算进行初步设计，进而采用有限元法对致动器的结构和线圈参数进行进一步的分析与优化。
The magnetic circuit structure of actuator is designed by analysis method. The structure and parameters are analyzed and optimized by electromagnetic field FEM.
优化孔型设计与现场主电机功率值的计算表明，轧制能耗可减少3.19%。
Optimization design of pass and computation of the main driving motor power under operation show that the rolling energy consumption may be reduced by 3.19%.
与传统的方法相比，该法物理概念清楚，表达式简单明了，计算结果精确，便于电算和优化设计。
Compared with the traditional method, the new one is clear in physical conception, simple in expression, accurate in calculation, and convenient for computer operation as for optimum design.
通过研究，提出了一种精确计算异形橡胶衬套的悬架系统动力学方法与优化设计方法。
Calculation method and optimum design is presented for the computation of kinematics for suspension system with abnormal rubber sleeve.
计算结果可以对燃烧臂及其底座的设计与优化提供重要的参考依据。
The results can give useful information for the designing and optimizing of the combustion beam structure.
在试制铝合金半固态压铸汽车零件过程中，引入计算机模拟技术用于充型过程的预测与缺陷的预防，实现了充型工艺系统的优化设计。
Computer simulation was employed to optimize filling system to predict filling process and prevent the defects for al alloy automotive parts in semi-solid die casting.
提出了简捷优化法与逐板严格计算优化相结合的方法，克服了以往优化设计计算中仅求得局部最优解的弊端。
Simple optimization method and rigorous calculation method are integrated in process optimization. It may overcome the defect of part optimal result.
提出了简捷优化法与逐板严格计算优化相结合的方法，克服了以往优化设计计算中仅求得局部最优解的弊端。
Simple optimization method and rigorous calculation method were integrated in process optimization. It may overcome the defect of part optimal result.
通过模态试验，可以计算出结构的固有频率、模态振型、阻尼比等参数，为结构设计与优化打下坚实的基础。
Eigenfrequency, vibration pattern and damping ratio can be got by modal experiment. Then, these parameters can be used to structural design and optimization.
应用推荐