科学家们称他们的计算证明了该制动系统的可靠性良好，能适用于飞机、火车和工厂的控制系统。
The scientists say their calculations have proved the brake system's reliability is so good it could be used to control systems in aircraft, trains and factories.
尽管中国取得了长足的进步，但在引导与控制系统、涡轮发动机、机床、医疗诊断与司法鉴定设备和计算机辅助设计与制造等方面还很落后。
Despite China's progress, it lags in guidance and control, turbine engines, machine tools, diagnostic and forensic equipment and computer-aided design and manufacturing.
网络控制系统是控制科学和计算机网络及通讯技术的综合应用。
Networked control systems are integration of controlling science, computing network and communicating technology.
计算机控制系统的引入，大大地提高了效率和精度。
The introduction of computer control system, greatly improves the efficiency and accuracy.
本文介绍了一种常见的卷绕生产线计算机控制系统，阐述了系统的构成、主要功能和实现方法。
This paper introduces a familiar kind of computer control system for convolute product line, and discusses its composition, main function and implementation method.
在铁路车站信号计算机联锁控制系统中，对系统的可靠性、可用性和实时性要求较高。
In the railway station signal computer based interlocking control system, there are high requirements for the reliability, availability and real time performance.
但这些方法大都需要昂贵的检测设备和复杂的传感控制系统和计算机处理系统，有些方法研究起来也有一定的困难。
But most of these methods is expensive to testing equipment and complex sensing control system and computer processing system, some methods to also have certain difficulties.
中央控制系统是一台计算机，采用组态软件，对电子地图板和区域显示器以及采集到的各子系统信息进行系统集成。
Central control system is a computer, using the configuration software, the electronic map display as well as the regional board and collected the information of the subsystems of system integration.
电子控制系统基本上由计算机或电子控制组件、发动机显示线束、输入的传感器和输出的执行器组成。
The electronic control system consists basically of the computer or electronic control module, engine wiring harness, input sensors, and output actuators.
目前基于计算机及网络的管理信息系统和自动控制系统已经很广泛地应用于各个行业的各个领域。
Management information system and automation system based on computer and net has been used in each field of each vocation widely at present.
本文还提供了发汗控制系统的实验方案，包括系统的计算机接口、硬件和软件以及发汗供给系统的实施方案。
In this paper an experimental plan of transpiration control system is also provided, including the hardware and software of the interface with the computer, and the coolant supply system.
随着计算机技术和管理技术的飞速发展，计算机控制系统也越来越多地被用于石油工业中。
With the development at full speed of computer technology and administrative skill, the computer control system is used in the petroleum industry more and more.
低频电磁场电流测控系统包括电流测试和输出控制两个部分，由软件和硬件相互配合组成一个完整的计算机控制系统。
The current measurement and control system in a Low-frequency Magnetic Field is a comprehensive system of hardware and software, including two parts: current measurement and computer control.
给出了基于全分布式计算机网络控制系统的硬件和软件实现。
I also put the hardware and software implementation of the full-distributed computer network based control system.
本文给出了带知识库的微型计算机控制策略，介绍了两级微机控制系统的软件和工作框图。
The paper presents the control strategy of the microcomputer with knowledge base, and describes the software and block diagram of work of the two-stage microcomputer control system.
结构设计作为电磁计算、控制系统设计和相关分析的基础，我们更有必要对磁力轴承结构虚拟设计进行深入研究。
The structure design is the foundation of electromagnetism calculation, control system's design and other analysis, so we should take much count of the virtual design of magnetic bearings' structure.
它是一种利用多媒体计算机、CAN现场总线和微控制器组成的一种新型的分布式多媒体控制系统。
A new type distributed multimedia control system, which utilizes multimedia-computer, CAN BUS LINE, and micro-controller is introduced.
为控制系统的计算机辅助设计提供了统一的命令表达方式和统一的运行界面；
A unified form of command and unified interface when command is running are provided for CADCS.
论文详细地介绍了该计算机控制系统的组成、功能、调试步骤和实际效果。
This paper introduces the composing, function, debugging steps and actual effect of the computer control system in detail.
对计算机控制系统虚拟实验室的研究和开发现状作了综述。
This paper overviews the current research and development of the computer control system virtual laboratory.
控制系统，计算机程序产品，装置和方法。
Control system, computer program product, device and method.
文中还以降低蒸汽消耗为目的，通过理论分析和计算，提出了控制系统的改进方向和控制方案。
Aimed at reducing the consumption of the steam, this paper also puts forward a design and the improving direction of the control system through analysis and computation.
计算机实时控制系统的可靠性和稳定性与它的抗干扰能力有关。
Reliability and stability of Computer real-time control system are concerned with ability tor its anti-interference.
根据系统的实时性和跟踪精度指标，设计了主从式结构计算机控制系统。
Based on the real time and tracking accuracy indexes, the master-slave computer control system is designed.
描述了高温高压流化实验床的工作过程，采用计算机控制和仪表控制相结合的设计思想，设计了具有手动后备的计算机控制系统。
The working process of experiment fluidized bed with high temperature and pressure is described, and a computer control system with a spare manual control is designed by combining computer with meter.
由管理计算机和控制计算机组成的新型商品砼配料生产线控制系统。
The control system of the new commercial concrete product line is composed of management and control computer.
汽车加速工况仿真实验系统由发动机-测功机实验台架、模拟驾驶实验台和计算机数据采集及控制系统组成。
The vehicle acceleration simulation system consists of three parts: the engine dynamo test bench, the driving simulation test bench and the computer data acquisition and control system.
本文介绍一种基于图象处理和识别技术的计算机视觉控制系统。
In this paper the computer vision control system, based on the principle of image processing and recognition, is introduced.
本文首先概述了计算机控制系统和PLC在工业控制中的重要性，分析了农产品加工机械产品的质量现状。
Firstly, this article summed up the importance for the computer control system and PLC in industrial control and analyzed the quality current situation of agricultural products processing machines.
系统采用间接法进行恒张力控制，利用现代传动设备变频器和工业控制计算机组成电气恒张力控制系统。
The system mainly takes an indirect method to control the constant tension which consists of a modern transmission frequency transformer and an industrial control computer.
应用推荐