本发明具有表面耐磨及止滑效果，透气性良好。
The insole has the effect that the surface has wear resistance, slip resistance and good air permeability.
表面采用三聚氰胺树脂，平整度高，表面耐磨。
Surface USES melamine and has flatness high, abrasion-resisting.
性能：表面耐磨，机械强度高，平整度高，密度均匀。
Property: scratches resistance, high mechanical, good flatness uniform density.
说明镍包石墨涂层可以大大提高钛合金的表面耐磨性能。
It means that nickel-coated graphite layer can greatly improve wear resistance of titanium alloy.
为了提高铸件表面的耐磨性，本文研究了合金增强表面耐磨复合材料。
In order to improve the abrasion-resistant on the casting surface, this paper has studied surface alloy-reinforced composites.
本文研究了U 74钢轨表面激光淬火工艺及其对表面耐磨性能的影响。
Laser quenching of U74 steel and its effect on the wear resistance are studied.
研究了渗稀土激光熔凝复合处理对纯铁表面耐磨性能及微观组织的影响。
This paper studies the effects on pure fe surface and the microstructure using the method of permeating re combined with laser melting modification.
激光雕刻仿生非光滑表面耐磨性提高的原因是：晶粒超细化，硬度提高，桩钉效应和仿生效应。
The reason for abrasive wear resistance enhancement of bionics smooth surface made by Laser Carving Technology is grain super-refining strengthening, hardening, effect of dowel pin and bionics.
离子注入对材料表面耐磨性能改善的效果取决于注入离子的种类、注入剂量、注入能量和注入温度。
The effect of improving wear resistance by ion implantation depended strongly on the ions, implanting dose, implanting energy and implanting temperature.
通过对柱塞的表面耐磨层进行各种试验，最后采用了高强度工程塑料进行压注试验，取得了成功，效果显著。
By make experiment of plunger case surface abrasion hardness, in the last, adopt high strength engineering plastic to act as anti-abrasive material, make the success, get great result.
为了提高铸件表面的耐磨性，实验以低铬铸铁为基体，WC颗粒为增强体，制备出颗粒增强表面耐磨复合材料。
In order to improve the abrasion-resistant on the casting surface, the low-Cr cast iron matrix composite reinforced by WC particles in sand mold was made in the experiment.
性能优势：通用性纸板表面耐磨转数只有450转，而超耐磨贴面板的转数是普通的3倍，能达到1500转。
Performance advantage: generality board exterior abrasion-resisting, while only 450 turns. And Super Abrasion-resistant Veneer Board is ordinary 3 times, can achieve 1500 turns.
新款产品不仅是外表镀真金而显得华贵美观，表面耐磨不氧化，整体技术含量和机械精度、音色等都能给用户耳目一新的感受。
Not only no oxidation and anti-wear appearance looks rich and beautiful because of gold plated technology, but surprise on the excellent tamber, technique and accuration, etc.
它具有耐磨、量轻、灵敏度高、声学阻抗低、容易固定在复杂的表面、价格便宜，频带宽等特点。
They are characterized by ruggedness, light weight, high sensitivity, low acoustic impedance, easy conformability to complex surface, low cost and large bandwidth.
这表面有极高的硬度（60局。），耐磨性和耐腐蚀性，低摩擦系数。
This surface has extreme hardness (60 RC. ), excellent wear and corrosion resistance, and low coefficient of friction.
该设备采用氮化钛表面掺金技术，形成离子金膜层，耐磨性非常好，广泛用于各种高档装饰膜层。
This equipment adopts the titanium nitride metal mixing techs forming ion gold membrane with good abrasion resistance, therefore it fits for various top-grade decorating membrane.
提高了产品立体感、增强了产品颜色的多样化及表面防火、防水、耐磨等特点。
Improve the product dimension, enhance the diversity of color and surface fire, water, wear and so on.
由于加进适量极压添加剂对高转速，大进刀具时，刀具仍然耐磨，制品表面光滑。
Due to the amount of extreme pressure additives on high speed, into the cutter, cutter still wear, smooth surface products.
试验结果表明，钢表面强化层具有良好的耐磨、耐蚀性能。
The experimental results show that the surface strengthened layers of steel possess better wear and corrosion resistance.
为防止锅炉受热面泄漏，可在电站锅炉吹灰器吹损的管壁表面喷涂耐磨涂层。
To prevent the leakage of power station boiler, the coating resistant to abrasion was prepared on the tube surface damaged by the power station boiler soot blowers.
表面粘贴高耐磨hpl面，多种颜色，纹理可供选择，四周侧面采用黑色导电边条封边。
HPL surface of high wear-resistant surface paste, a variety of colors, textures to choose from, around the side of a black conductive edge of the edge.
顶级涂层的金属圆锯片（表面：彩虹色），经过最顶级的涂层处理，具有优异的耐磨性能。
Metal-cutting circular saw blades have the top-performance coating for metal-cutting circular saw blades .
它的喷涂材料丰富，能赋予工件表面以耐磨、耐蚀、抗高温等多种功能，并且工艺及操作简便。
The spraying material is abundant and it endows workpieces with wear-resisting, anticorrosive, temperature-resisting capabilities and so on.
结果表明，激光硬化处理的表面能够有效地改善材料表面硬度和耐磨性。
The results show, surface treated by laser hardening can improve the surface hardness and wear resistance.
结果表明，该钢经复合处理后，具有较好的表面硬度和良好的耐磨性，显著地增加了刀具的使用寿命。
The results showed that the steel after combined treatment had higher surface hardness and wear resistance, and prolonged the service life of cutting tool.
研究了断裂方式对磨损表面剥落和耐磨性的影响。
The influence of fracture mode and wear surface pullout on wear resistance was studied.
所用的金属和应用系统都可以变化，但大多数应用都是在要求改善抗腐蚀或耐磨性能的表面涂上薄层。
The metals used and the application systems used vary but most applications result in thin coatings applied to surfaces requiring improvement to their corrosion or abrasion resistance properties.
认为激光硬化处理能够有效地改善材料的表面硬度和耐磨性。
The laser hardening material can effectively improve the surface hardness and wear resistance.
认为激光硬化处理能够有效地改善材料的表面硬度和耐磨性。
The laser hardening material can effectively improve the surface hardness and wear resistance.
应用推荐