系统由程控电源、测试回路、信号采样、调理电路和数据采集接口卡等部分组成。
The system is composed of programmable power, test circuit, signal sampler, signal conditioner and data acquisition card.
根据低压程控电源程控接口的特点，阐述了程控电源PC总线控制板卡的设计原理。
According to the characteristics of program controlled interface in low voltage programmable power supply, the design principles of PC bus board in programmable power supply are described.
测试系统包括程控电源、测试回路、信号采集、调理电路和单片机数据采集接口电路等部分。
This system is composed of a programmable power source, a test circuit, a signal sampler, a signal conditioner and a Single Chip Microcomputer.
数据采集卡采集程控电源的输出以实现对程控电源的闭环控制，采集发电机控制器和汇流条功率控制器的保护信号以计算延时时间。
Data acquisition card collects data about the power output to realize a close-loop control, and protection signal of the two controllers to compute the delay time.
IPMI提供了远程控制机器电源的方法，还提供远程控制台，可以观察计算机的BIOS引导过程。
IPMI offers a way to remotely power-cycle a machine, as well as have remote console viewable to see the machine boot from BIOS.
介绍了用于电压继电器动作特性测试的可程控交流电源。
A programmable power supply which tests action characteristic of voltage relay is presented.
远程控制设备和系统。第5部分：传输协议。第102节：总电源系统传输的标准手册。
Telecontrol equipment and systems. Part 5: transmission protocols. Section 102: companion standard for the transmission of integrated totals in electric power systems.
某些国外电镀电源虽然也实现了程控，但也存在一定的缺陷，如脉宽调节范围较窄，脉冲频率不可调等。
And some foreign power supply units for electroplating also have certain disadvantages, such as limited adjustable range of impulse width, and non-adjustable impulse frequency.
本文对程控电度表校验台用PWM电源进行设计，提出了整体硬件设计方案。
Programmable Meter Tester with PWM power supply design raised the overall hardware design.
与一个单一的联系，在手掌大小的和谐1100年缩短了电源远程控制您的家庭娱乐在你的手中。
With a single touch, the palm-sized Harmony 1100 remote puts the power to control your home-entertainment in your hands.
对该焊机的主电源结构、小车行走控制电路、送丝电路、单片机控制电路以及焊接过程控制软件等的设计作了较详细的介绍。
The design of main power sources structure, the control circuit for welding tractor and wire feeder, SCM control circuit and software for welding process are introduced in detail.
防御性军事战地远程控制系统硬件由指控单元、中央单元、直流电源和外设单元组成。
The hardware of remote control system for defensive military battlefield consists of Command and control unit, central unit, DC power supply and peripheral units.
弧焊电源的输出动态特性的研究，对优化焊机性能、焊接过程控制和改善工艺效果有重要意义。
Study of the dynamic output characteristics of arc welding power supply is of great significance for optimization of welder design, control of welding process and improvement of welding quality.
介绍了一种用于程控交换机的由VMOS管驱动的DC - DCPWM开关电源的工作原理与电路设计。
This paper introduces a kind of DC-DC PWM switching mode power supply driven by VMOS and applied to Program Exchange. The principle and circuit are presented.
分析了焊接电源、焊缝跟踪和焊接质量的模糊控制技术，探讨了模糊逻辑在弧焊过程控制的应用途径。
The fuzzy control techniques for arc welding power source, seal tracking and arc welding quality is analyzed. The fuzzy logic application methods in arc welding process control is discussed.
本文设计的发电机检测系统由转速驱动和控制单元，数据采集单元，可程控的负载，初始励磁电源以及应用测试软件组成。
The system is composed of rotate drive and control unit, data acquisition unit, program control load, initial excitation source and measure-control program.
变压器断开线已扩大至包括提供电源产品，可编程控制器和其它电子设备。
The transformer disconnect line has been expanded to include products that provide power to programmable controllers and other electronic devices.
它通过将TCP/IP嵌入到电源当中，实现电气设备与互连网的对接，实现电器设备的远程控制，网络控制。
The product has embeded the TCP/IP protocol into the power and realize the electronical facilities to connecting with Internet. , and also realize the remote control and network control.
该监控软件包括对EPS电源管理、参数的显示、远程控制和报警等功能。
The software includes the management for EPS power supply, display of parameters, long-distance control and alarm etc.
同时介绍了基于PLC可编程控制器应用于离子泵电源的启动和过流保护的远控系统。
The features of the BEPCII linac vacuum system are described, with the remote monitoring system used in the process of ion pump power starting to normal operation and overflow protection based on PLC.
支撑架中放置有显示屏控制系统和电源系统，电子计算机可以进行远程控制，也可以安装到支架中。
The control system of display and source system are located on the supporting rack, and the computer can be controlled remotely, or mounted on the supporting rack.
摘要：在分析CO2焊接过程控制特点的基础上，设计了恒流型IGBT逆变电源。
Abstract: Based on the foundation of analysis of CO2 welding process, a constant current (CC) IGBT inverter is developed.
同时仪表柜及系统程控柜配置ups电源，保证系统在意外断电时工作人员有紧急处理的时间。
Meanwhile, UPS is equipped for instrument cabinet and system program control cabinet to ensure that there will be emergency handling time for workers during accident power interruption.
所有元器件均来自一个品牌，包括真空断路器，空气断路器，电流接触器，热继电器，驱动，可编程控制器，输入输出模块，电站管理系统继电器和仪表，不间断电源，传感器和照明器材。
All of components come from one brand, from vacuum circuit breakers, air circuit breakers, contactors, thermal relays, drives, PLC, I/O, PMS relays and meters, UPS, sensors and lighting fixtures.
所有元器件均来自一个品牌，包括真空断路器，空气断路器，电流接触器，热继电器，驱动，可编程控制器，输入输出模块，电站管理系统继电器和仪表，不间断电源，传感器和照明器材。
All of components come from one brand, from vacuum circuit breakers, air circuit breakers, contactors, thermal relays, drives, PLC, I/O, PMS relays and meters, UPS, sensors and lighting fixtures.
应用推荐