具有良好的耐酸、堿、盐雾和湿热性能。
采用间隙盐雾试验考察了修复层的耐蚀性能。
The corrosion resistance of renovated film was measured by batch salt spray test.
在盐雾试验或其它试验后沿着划线涂层边缘的腐蚀。
Corrosion under a scribe line or an area of damaged coating or edge, after salt spray testing or other testing.
化学性能测试：材料的盐雾试验、不锈钢腐蚀试验等。
Chemical property testing: salt spray test of materials, corrosion test of stainless steel.
介绍了有机涂层中性盐雾试验的相关标准及其评价方法。
The standards and the comment process of neutral salt-fog test for organic coatings are introduced.
结果与失重法和中性盐雾试验法相比，有较好的一致性。
Its results have better consistency than those obtained by methods of weight loss and neutral salt spray.
合适的后处理工艺可提高镀层的耐磨性和抗中性盐雾能力。
An appropriate after treatment can improve the abrasive and neutral salt spray resistance of the film.
这能保护铁不受氧气和盐雾的氧化，铁桥的使用寿命也更长。
It protects the metal from theactions of salty spray and oxygen and the bridge will last a very long time.
研究结果表明：盐雾试验对涂层材料的主要影响结果是起泡。
The research results show that blistering is the main phenomena of coating under salt spray test.
潮湿的盐雾环境和化学氧化膜的薄而软是引起腐蚀的主要原因。
It is mainly reason that wet and salt spray environment and thin film of chemical oxidation.
盐雾环境下，氯离子侵蚀是混凝土结构耐久性退化的主要原因。
Chloride ingress is the main reason for durability deterioration of reinforced concrete structures in salt-fog environment.
这种表面能有效地抵御水、盐雾、碱、原油和天然气的腐蚀反应。
The surface effectively resists corrosive action of water, saltwater spray, alkalies, crude oil, and natural gas.
我们郑重承诺，我们所有金属、塑料材料做到48小时盐雾测试。
We promise that we all metals, plastic materials to do 48 hours of salt spray test.
使用该产品的电机能够通过潮湿、盐雾等防锈试验专项测试要求。
Motor using the product through damp, salt spray test, such as special anti-rust testing requirements.
曾对此套作了耐候、耐湿热、耐盐雾、抑真菌、存放等性能实验。
Moisture and temperature test, Salt spraying test, Fungus test and Storing test.
通过盐雾试验，考察了几种防锈剂及其复合防锈剂的抗盐雾性能。
The salt spray corrosion resistance performances of several single inhibitor and composite inhibitor have been studied by the salt spray corrosion test.
试验结果表明：漆膜具有良好的耐水、耐油、耐盐雾及低播焰性能。
The result showed that the film possessed good properties, such as water resistance, oil resistance, salt fog resistance and low flame spread.
简要介绍了盐雾试验的两项国家标准，对标准的正确应用作了必要的说明。
This paper has briefly described two national standards for salt spray test and added necessary explanation for correct implement of them.
采用X—射线衍射分析法、显微硬度测试法和盐雾试验法来检测镀层性能。
Properties of the Zn-Ni alloy deposit were determined with the methods of X-ray diffraction analysis, microhardness and salt -spray test.
电子双数显拉簧、压簧、扭簧测试仪器、投影仪、硬度计、盐雾测试机等。
The company provides electronic double-digital display tension spring, compression spring, torsion spring testing device, prijector, sclerometer, and salt spray tester.
不同的蜡对溶剂型防锈油的油基稳定性、抗盐雾性能和耐大气性能影响较大。
Shelf stability, salt spray resistance and atmospheric resistance of rust preventive oil could be changed with the oil used.
用中性盐雾腐蚀试验来评价复合材料的耐蚀性，并用XRD检测了腐蚀产物。
Finally, the corrosion resistance of samples is evaluated by neuter salt-spray tests and corrosion products are confirmed by XRD.
一些编码器会经受海洋应用场合的盐雾测试以及湿热测试，证明其热带适应性。
Some encoders are exposed to a sprayed salt mist test for Marine applications and a humid heat test to verify their tropical suitability.
采用SEM、电化学、以及盐雾试验和湿热试验等其它方法对封孔材料与效果进行了评价。
The sealing materials and sealing efficiency was studied by means of SEM. electrochemical salt spay test and hot-humid test.
经环境试验证实能够达到防霉防盐雾的效果，进一步证明了该可剥离防护膜具有良好的性能。
The environmental test results for antimildew and antifogging were very satisfactory, which proved the good performance of the protection film.
耐蚀性：阳极处理之盐雾测试，可依客户要求来规定，但至少要有24小时以上，视产品之定之。
Corrosion resistance: salt test of plating, maybe according to the customers' needs, depend on the production, but at least 24 hours.
涂层金属耐腐蚀性的电化学测定方法简便，快速，比盐雾试验和大气曝露等常规方法提供较多信息。
The electrochemical determination of corrosion resistance of coated metals is more easy and simple compared to the salt fog test and atmosphere exposure and may provide more information.
采用中性盐雾试验测定了镀层的耐蚀性，采用内孔法测定了镀液的覆盖能力，并测定了镀层的硬度。
The corrosion resistance of deposits and covering power of the plating bath were tested respectively by neutral salt spray test and inner-pole method, and the hardness of deposits was also measured.
采用中性盐雾试验测定了镀层的耐蚀性，采用内孔法测定了镀液的覆盖能力，并测定了镀层的硬度。
The corrosion resistance of deposits and covering power of the plating bath were tested respectively by neutral salt spray test and inner-pole method, and the hardness of deposits was also measured.
应用推荐