讨论了影响电泳漆性能的诸种因素。
Factors influencing the properties of the CED paint were discussed.
介绍了阴极电泳漆的几种性能测试方法。
Several test methods of performances of the cathodic electrophoresis paints are introduced.
介绍了影响电泳漆沉淀的主要因素和采取的对策。
The main factors influencing precipitation of electrophoretic coatings and their solving methods are given in this article.
介绍了电泳漆液沉淀产生的主要原因及处理方法。
The main reasons of depositing in electrophoretic paint and the treatment methods have been discussed.
所得的聚氨酯丙烯酸酯光固化阴极电泳漆综合性能良好。
The UV curable cathodic electrophoretic paint prepared by polyurethane acrylate showed good properties.
本文研制了用于阴极电泳漆处理的HNA型复合超滤膜。
The HNA composite membrane was prepared to depose electrophoresis paints.
根据商用车车架的材质及其结构特点,选择使用高防腐阴极电泳漆。
Based on the materials and structure features of commercial vehicle frame, high anticorrosion cathode electrophoresis paint was chosen.
表面层透明漆、二层金属漆、三层静电漆(防辐射)、底层电泳漆。
Surface layer clear lacquer, two metallic paints, three static electricity paints (radiation protection), first floor electrophoretic paint.
经过改进,电泳漆膜各项性能达到质量要求,面漆外观质量得到了提高。
Afterward the appearance and thickness of coatings get right, and all properties of coatings meet the quality requirement, aside the quality of varnish is improved.
介绍了阴极电泳漆烘干过程中废气的来源,提出了废气处理设备的设计原则。
This paper introduced the source of exhaust gas from cathodic electrodeposition primer in baking, and gave the design principle of disposal equipments.
厚膜型阴极电泳漆是阴极电泳漆的新一代产品,其膜厚明显高于一般电泳漆。
The thick film type of cathodic electrodeposition coating is a new one of electrodeposition coatings whose film is more thicker than that of other electrodeposition coations.
用于电泳漆的颜料必须细心选择,不能使用水溶性太强的或与水起反应的颜料。
The pigments used in electropaints must be carefully chosen. Those which are too water soluble or those which react with water should not be used.
对阴极电泳漆的干膜密度、溶剂含量、烘干减量的测试方法、影响因素进行了探讨。
This article discusses the test methods of dry film density, solvent content, and weight loss during baking of the cathodic electrophoresis paints, as well as the influencing factors.
随着人们对环保及低能耗要求的不断提高,低温固化电泳漆己成为电泳漆发展趋势之一。
With the increasing requirement on the environmental protection and low energy-consuming, the low cured EC is becoming a trendy for the development of EC sector.
介绍了ED - 5电泳漆的技术特点,并与ED - 4电泳漆的技术特点进行了比较。
The technological characteristics of ED-5 electrophoretic paint are introduced in comparison with those of ED-4 electrophoretic paint.
PP G电泳漆实验室每周从槽中取的样品做实验,常常是在生产线上出现问题之前就能预报。
Samples from the tank, which are tested weekly at the PPG Electrocoat Laboratory, often predict problems before they appear on the line.
为满足顾客需求,减少磕碰,保证产品质量,增加一条高标准阴极电泳漆生产线和电镀生产线。
To meet the customer need, and to reduce the collision, and to guarantee the product quality, we increase a high standard negative.
本文对阴极电泳涂装的成膜机理,电泳漆膜质量的影响因素,电泳漆的回收利用及废水处理作了论述。
The film-forming mechanism, factors affecting the film quality, recovery and recycling and sewage disposal in respect with cathodic electrophoretic painting are described in this paper.
同时,从理论上分析了低锌磷化膜耐腐蚀性好的原因,强调了低锌磷化膜是所有电泳漆的最佳匹配选择。
It also analyzed the causes of higher corrosion protection of low-zinc-phosphating film, and indicated low-zinc-phosphating film is the best choice for all sorts of electrodeposition paint.
经过大量的技术准备工作和周密的实施过程,使该项替代工作获得成功,证明了不同体系电泳漆混溶的可行性。
With a number of technology preparation and well thought - out operation, the substitution was succeeded, which has shown that the compatibility of different CED system is feasible.
合成了用于阳极电泳漆的阴离子丙烯酸树脂,研究了影响树脂电沉积效果和涂膜性能的因素,探讨了涂膜在高温和低温固化的实现途径。
The title CED paint is developed by combination of acrylic and epoxy resins to solve the weathering problem for only epoxy resin CED "primer-topcoat in one" paint.
合成了用于阳极电泳漆的阴离子丙烯酸树脂,研究了影响树脂电沉积效果和涂膜性能的因素,探讨了涂膜在高温和低温固化的实现途径。
The title CED paint is developed by combination of acrylic and epoxy resins to solve the weathering problem for only epoxy resin CED "primer-topcoat in one" paint.
应用推荐