他们从通过拆分地球深处说热熔融材料流动起来。
They said hot melted material flows up from deep inside the Earth through the split.
依冷凝速率梯度不同，该组成样品可以获得显微结构渐变的熔融材料。
The cooling speed gradient leads to a gradually changed microstructure of the fused materials.
激光深熔焊接的传热过程包括热传导和焊接熔池内熔融材料的对流流动。
The heat transfer in laser deep penetration welding includes heat conduction and convection in the welding pool.
研究人员发现在月球内部深处：有一个跨度约为300英里的固体铁球，包裹在另外56英里厚的铁水里，顶上部分地还有93英里层的熔融材料。
What the researchers found deep in the lunar interior: a solid iron ball 300 miles across, wrapped in molten iron another 56 miles thick, topped with a 93-mile layer of partially molten material.
可以认为颗粒与基体间弱界面的解聚是熔融石英颗粒复合材料韧化的原因。
The decohesion of the weak interface between particle and matrix may be considered as the origin of toughening.
无机涂层有电镀、转化层、热喷涂、热浸渍、熔炉熔融、或在材料表面涂上薄膜、玻璃、陶瓷。
The inorganic coatings perform electroplatings, conversion coatings, thermal sprayings, hot dippings, furnace fusings, or coat thin films, glass, ceramics on the surfaces of the materials.
通过熔融共混的方法制得甘油含量不同的TPS样品，研究了甘油含量对材料的结构与性能产生的影响。
The TPS materials with different glycerol contents were produced by melt blending method. The influences of the glycerol contents on the structure and properties were studied.
应用传热学理论，建立材料丝在液化管中的熔融模型。采用数值解方法，求出该模型的解。
By applying theory of heat transfer, a melting model of material filament in liquefied pipeline is built and solved by numerical method.
通过交流阻抗方法研究了熔融碳酸盐燃料电池阴极材料锂镍氧化物、锂钴氧化物和锂铁氧化物的导电性能。
The conductivity of cathode materials for molten carbonate fuel cell (MCFC), such as lithium nickel oxide, lithium cobalt oxide and lithium ferrite oxide, was studied by AC impedance measurement.
结果表明：该复合材料有优良的拉伸强度、抗水性和熔融流动性；
The modification results in the excellent mechanical properties, water resistance and melting fluidity of this composite material.
成功地制备了以泡沫金属镍为基体和熔融盐复合形成新型高性能复合蓄热材料。
We successfully prepared the high quality composite heat storage materials by combining foam metal nickel base and some kinds of molten salts at certain temperature.
熔融性比较差的镀膜材料在蒸发过程中以直接气化为主，挖坑效应比较明显。
Materials without good melting property will not be melted and digging effect will exhibit evidently when electronic beam irradiating on it.
下分水口均可采用熔融石英、铝碳质、锆质材料制成。
The lower bleeder is made from fused silica, and aluminum carbon and zirconium materials.
木塑复合材料的加工技术是把塑料、木质纤维(稻壳、木屑等)与助剂一起熔融、混炼制成颗粒，再经过挤出成型的一种加工方法。
Processing technology of WPC is a kind of processing method that plastics and wood fiber are melted, smelted and extruded together with chemistry assistant agents.
以d,l乳酸、乙醇酸为原料，通过熔融聚合法直接合成生物降解材料聚乳酸乙醇酸(PLGA)。
Starting from d, Llactic acid and glycolic acid, biodegradable drug delivery material poly (lactic acid-glycolic acid) (PLGA) was directly synthesized via melt polycondensation.
快速成型技术中的熔融沉积造型(FDM)工艺由于设备费用较低、材料利用率较高而在实际生产中得到广泛的应用。
Fused Deposition Modeling (FDM) in rapid prototyping technology is widely applied in industry because of its lower expense of equipment and lower consumption of materials.
针对传统失芯注射成型利用低熔点合金熔融去芯时出现的问题，研制了一种新型水溶性失芯材料。
In view of some problems emerged in melting lose core process of low melting alloy in traditional lose core injection molding technology, a new type of water soluble lose core material was developed.
通过熔融混合挤出得到增强HIPS复合材料。
Mixed melt extrusion through enhanced HIPS composite materials.
本发明揭示一种熔融模制材料。
采用高温熔融法，在硼酸盐玻璃的配合料中引入抗菌剂磷酸银，一次烧制而成制得抗菌玻璃材料。
By adding silver phosphate as antibacterial into the batch of borosilicate glass, we can get the anti-bacterial glass in high temperature melting furnace.
负责原材料、配料和窑炉操作的人应该给制瓶工人提供始终如一、无缺陷的连续不断的玻璃熔融液。
The goal of people responsible for raw materials , batching , and furnace operations should be to provide the bottle makers with a continuous flow of uniform defect - free glass.
本发明提供了由熔融的矿物材料形成纤维的方法。
A method of forming fibers from molten mineral material is provided.
挤出共混法通过熔融混炼聚合物和纳米微粒可加工成稳定的纳米复合材料。
Extrusion blending method can process a stable nanometer compounding material through melt-mixing polymer and nanometer particle.
注射成型的基本概念是使热塑性材料在受热时熔融，冷却时硬化。
The basic concept of injection molding revolves around the ability of a thermoplastic material to be softened by heat and to Harden when cooled.
采用一种新的熔融浸渍工艺制备了长玻纤增强尼龙6复合材料，研究了玻纤含量、玻纤长度分布对复合材料力学性能的影响。
The long glass fiber reinforced PA6 was prepared by using a new melt impregnation process. Influences of the glass fiber content and distribution to the composite were studied.
激光切割熔融石英材料出现裂纹的主要原因是相当大的温度梯度所产生的过大热弹性应力。
The great thermal elasticity stress, resulted from the too great temperature gradient of material, is the main cause of bringing many cracks when the laser beam cuts the fused quartz material.
传感器的结构建立在SOI材料上，在关键工艺中采用硅熔融键合技术。
The structure, which is fabricated on the SOI material, and its fabrication process have been designed based on the theoretical analysis.
传感器的结构建立在SOI材料上，在关键工艺中采用硅熔融键合技术。
The structure, which is fabricated on the SOI material, and its fabrication process have been designed based on the theoretical analysis.
应用推荐