板柱结构的周边布置边梁可以提高结构的抗震性能。
The seismic performance of flat plate structure can be improved by the spandrel beam.
用等代框架法计算空心板柱结构的关键是确定等代框架的宽度。
The equivalent frame method is the most common method for hollow flat-plate structures, and how to compute the equivalent frame width coefficient is one of key questions of the method.
在美国及其他一些国家,板柱结构是最常被采用的结构形式之一。
In USA and other countries, one of the most common floor systems is the flat plate.
在板柱结构中,板柱连接处的冲切问题是结构设计中的一个薄弱环节。
Proportioning of slab-column connections for adequate Punching strength and ductility is a trigger mechanism in the design of reinforced concrete flat plat structures.
经过对板的结构性能和经济指标的分析,表明这种板可在板柱结构体系中推广应用。
The analysis result of the structural behaviour and economic benefit of the plates shows that such a kin…
抗扭构件的刚度计算公式可应用于钢筋混凝土平板-异形柱板柱结构体系的等效柱理论分析。
The theory expression of transverse torsion member can be applied to equivalent column method to analyze the behavior of reinforced concrete flat plate-special-shaped column structural system.
现讨论一种新型空间结构—组合式网格板柱结构,它使单向受力变为双向受力,从而形成三维受力体系。
This paper discusses a new spatial structure-composite grid slab column structure, which is designed to transform single way force into two-way force to form a spatial forcing system.
无柱帽板柱结构作为一种新型的房屋结构形式,在工程实践中应用不多,尤其是在地震区的使用就更少。
The slab column structure without column cap which is a new type of building structure has not been used usually in engineering practice, especially rarely applied in earthquake regions.
指出在罕遇水平地震作用下,板柱节点发生冲切破坏后,板柱结构的变形呈现弯曲型,并通过算例进行了验证。
It is pointed out and verified by an example that the deformation of flat plate structures is flexural after punching failure of slab-column connection happened under severe earthquakes.
根据实例从结构的具体计算方法及构造施工措施等方面阐述了无粘结预应力板柱结构体系的设计,并进行了经济分析。
According to the computation method and construction practice, the design of the unbonded prestressed slab-column structure is presented and its economy is analyzed.
装配式整体预应力板柱结构是采用预制的钢筋混凝土楼板和柱作为主要的受力构件,通过整体张拉预应力钢筋而形成的板柱结构体系。
Slab-column structure assembled by monolithic prestressing is a type of structure system in which prefabricated reinforced concrete slabs and columns are main members bearing load.
钢结构节点设计中,梁与柱弱轴方向的柔性连接常采用剪力板高强螺栓连接,螺栓群所承受的荷载有竖向力和偏心力矩。
In the connection design of steel structure, the shear plate with high-strength bolt connection is extensively used at the flexible joint where the beam is connected to the weak axis of the column.
建筑的结构包括钢筋混凝土承重柱、梁、墙面和天花板。
The building structure is made of reinforced concrete load-bearing columns, beams, walls and ceilings.
地板和天花板组件是胶合构造,墙是建于梁和柱结构的平板,并于两边绝缘。
The floor and ceiling components are constructed out of glulam, the walls are constructed from a beam and post construction planked and insulated on both sides.
结构加固中,柱优先采用加大截面法,梁采用综合加固法,板采用体外预应力法。
Section increasing method is given priority to apply to the corroded columns, and then the comprehensive method to the beams, external prestressing method to the slabs.
通过对梁、柱、板等基本建筑元素的细节化处理,让结构直接呈现出建筑的本真之美。
Through careful design of architectural elements like beam, column and facade panel, the structure exposes itselfshowing the naturebeauty of the building.
介绍了缀板梁结构体系在框架结构抽柱托换以及加层改造中的应用,并分析了该方法的优点以及设计时注意的问题。
The paper presents the application of batten-plate beam structure in removal columns from frame structure and adding stories. It analyses the advantages and the notices in design.
研究表明,有机相连续时,与其它结构参数的喷嘴板相比,标准喷嘴板脉冲萃取柱具有操作通量大和稳定性好的优点。
The results indicate that the pulsed extraction column provides high operating capacity and stability using a standard nozzle plate rather than other cartridge geometry nozzle plates.
各楼层的梁板柱(包括悬挂斜拉索的立柱)为钢筋混凝土结构。
The complicated structure incorporates a reinforced concrete structure and a spatial steel structure with a stayed cable structure.
对于钢筋混凝土框架结构设计中,基础、梁、柱、板四部分应注意的问题,分别提出了几点看法。
For the design of reinforced concrete frame structure, the four parts of foundation, beams, columns, boards should be paid attention to. A few comments are presented respectively.
介绍了新型单柱式全自动管板氩弧焊机的结构特点、工作原理、主要部件和焊接的使用效果。
This article introduces the characteristic, working principle, main parts and the welding efficiency of the new single-pole pipe-board auto inert gas arc welding machine.
主要结构元素有钢筋混凝土板、板和柱。
The main structural elements are reinforced concrete slabs, plates and columns.
利用该折板结构的空间传力特性,设计了结构板、梁、柱的尺寸、布置、配筋和细部构造。
Taking advantage of folded-plate characteristic of transmitting forces spatially, the laying-out, section, reinforcing bars, and detail construction of slabs, beams, columns are designed.
钢管混凝土结构目前在高层结构中的应用越来越广,但是钢管混凝土柱与梁板的连接还存在着诸多问题,特别是钢管混凝土柱与梁连接的节点受力性能还需进一步研究。
At present, the concrete filled steel-tubular structure has been used in many hight - building, but the CFST column connected beam have a lot of questions, need to study deeply.
这种“梁、板、柱”的结构体系,将所有的压力和所需的空间刚度均匀得分到各个结构,并及时转移到地面。
This structural system - plates, slabs and columns - has the spatial rigidity required to convey all the stresses and distribute the loads evenly when transferring them to the ground.
所述六边形结构单元包括柱和梁或板的局部。
The hexagonal structural unit includes columns and a part of a beam or a slab.
该结构柱包括钢管、缀件、连接板、螺栓、混凝土。
The structure column comprises steel tubes, a studding piece, a connecting plate, a bolt and concrete.
目的:探讨保留后柱结构,有限椎板切除,腰椎管扩大术治疗腰椎管狭窄及中央型椎间盘突出症的可行性。
Objrctive:To study the feasibility of keeping posterior of lumbar spinal canal stenosis and central lumbar disc herniation.
楼层结构由框架柱、楼层梁、钢楼承板以及边模板等组成。
Mezzanine structure is make up of steel column, floor beam, meal deck, etc.
楼层结构由框架柱、楼层梁、钢楼承板以及边模板等组成。
Mezzanine structure is make up of steel column, floor beam, meal deck, etc.
应用推荐