在分析球磨机、分级机系统模型基础上，论文给出了磨矿分级过程的控制依据，并将整个磨矿系统分解为若干控制子系统。
The control method of grinding grade process is designed and the whole grinding system is treated as several control subsystems by analyzing of the model of mill and grader.
对于既负责大型机、又负责小型系统的人而言，由于这两种系统在编程或维护模型方面缺乏共同点，因此这种可移植性就显得格外重要。
This is especially important for those with responsibilities that range over mainframes and smaller systems, which share so little else in their programming or maintenance models.
OTP系统通常采用客户机-服务器模型，在给定的时刻对于给定的用户，在客户端生成相同的一次性密码。
OTP systems are typically built on a client-server model, where at a given time, for a given user, the same one-time passwords are generated on the client side.
开发人员使用客户机/服务器模型与集中式VCS系统交互，对本地源代码拷贝的更改只能推回到中心存储库中。
Developers interact with centralized VCS systems using a client/server model, where changes to your local copy of the source code can only be pushed back to the central repository.
这种模型使用一个虚拟机，它在客户操作系统和原始硬件之间进行协调(参见图2)。
This model USES a virtual machine that mediates between the guest operating systems and the native hardware (see Figure 2).
工作流模型的一个中央节点控制那些参与了分布式状态机和两个路由器模型的多个节点；整个系统是使用DEBA来实现的。
A workflow model central node controls the nodes participating in a distributed state machine and two router models; the entire system is implemented with DEBA.
典型的教练机训练效能计算模型对飞机的航空电子系统、操纵系统考虑不足，对飞行参数选择有局限性。
The typical computation model of training effectiveness of training plane has limitation in selection of flight parameters as well as insufficient attention to avionics and control system.
最后以一个6机测试系统为例实际验证了该模型和算法的可行性及有效性。
At last, the feasibility and effectiveness of the equivalent model and the method are testified by a 6-machines test system.
集中供冷系统仿真数学模型的主要特点是压缩机可以根据蒸发器总负荷大小选择性开关不同的档位，相应的输入输出参数也随之改变。
And the capacities of compressor could be selected by on-off switch along with the change of burthen of evaporator, which is a main characteristic of the central refrigeration system model.
本文研究了摄像机模型的标定方法，采用了通过一台摄像机平行移动来模拟两个摄像机的标定方法，达到标定系统参数的目的。
In this paper, we introduce the camera model calibration algorithms and adopt a method of moving a single camera to calibrate parameters of traffic monitoring system.
仿真研究表明，SVM具有优良的逆模型辨识能力，基于模糊控制补偿的支持向量机逆控制系统的动态性能好、跟踪精度高、鲁棒稳定性强。
Simulations demonstrate that SVM has good nonlinear approximation capability for inverse model, and the proposed control system has good dynamic and static performances as well as good robustness.
本论文的背景是高炉炉况诊断系统，论文主要包括扩充的时态黑板模型、推理机的设计与实现。
The background of the paper is Status Diagnosis System in Blast Furnaces. The dissertation includes: extended blackboard model, design and realization of inference.
论文还详细介绍了数控刀具事实库、规则库以及数控刀具选配系统推理机的设计方法，并建立了基于专家系统的数控刀具选配系统模型。
This paper also introduces the design methods of fact base, rule base and reasoning machine design method of NC tool selection system, and establishes NC tool selection model based on expert system.
浆纱机经纱退绕张力控制系统缺乏精确的数学模型，且具有非线性和时变性的特点。
Warp unwinding tension control system for sizing machine lacks an precise mathematical model, and has nonlinear and time-varying Characteristics.
最后作为复杂机械产品的应用实例，建立了港口门座式起重机的CAD系统模型。
As an example, we build the model of the portal crane CAD system to verify the above techniques and criterions.
该系统在管理信息系统(MIS)的基础之上，用模型库，数据库、方法库和人-机对话系统构成。
The system is consisted of model base, data base, method base and man-machine dialogue system on the basis of Management Informantion system (MIS).
应用系统辨识方法建立拖拉机阻力控制系统犁耕阻力的数学模型。
With the method of system identification, a math model is set up in this paper.
其次，建立了一个含平衡重子系统、主提升子系统和船厢子系统的简化升船机模型。
Secondly, a simplified ship lift model is founded including the balance weight subsystem, the lift subsystem and the ship-chamber subsystem.
提出了基于AR模型和支持向量机的转子系统故障诊断方法。
A fault diagnosis approach for rotor systems based on AR model and support vector machine is proposed.
利用BP人工神经网络的非线性映射能力，研究建立了中央空调系统制冷机的能量消耗模型。
A model for refrigerator energy consumption of a central air-conditioning system was established with nonlinear mapping capability of BP ANN.
利用该模型对皮带机控制系统的设计进行了探讨，并得到符合控制要求的逻辑规则表达式。
Using this model the scheme of the control system of belt conveyors is discussed and the logic rule expression that meets control requirements is gained.
通过对武装直升机的红外辐射特性进行分析，建立了凝视型IRST系统对武装直升机的作用距离模型。
Through analyzing the radiate characteristic of the armed helicopter in theories, the operating range model of a staring IRST system for the armed helicopter was established.
针对位置自动控制系统的要求，建立了系统数学模型，研究了精锻机控制系统的定位控制算法。
As to demands of automatic position control system, a model of system mathematics was set up. Control algorithm of precise forging machine orientation is studied.
为了研制海上搜救模拟器的直升机模拟系统，给出了直升机模拟的系统结构，建立了直升机的悬停数学模型。
A system configuration of helicopter simulation is given and a mathematical model of helicopter hovering is set up as to development helicopter simulating system in Marine search and rescue simulator.
考虑被压实物料的不对称滞回特性，建立了振动压路机振动轮-车架系统的二质量运动模型。
A two-mass model of the vibration compacting roller and its frame is established with consideration of materials asymmetrical hysteresis.
文中详细分析了它们的带宽、延时性能与数据流量和数据缓冲区的关系，给出了机群机间通讯系统的性能评价模型。
The models to evaluate their performance are given and then equations listed which tell the relations of bandwidth, latency, flow rate and buffer sizes.
本文介绍用微机控制液压挖掘机作业运动的原理、控制模型、系统软件以及试验台试验结果。
The principle, mathematical model, system software of a hydraulic excavator with micro computer controlled digging movement and it's bench test results are introduced in this paper.
文中还描述了一个以有穷状态机为工具的导航系统模型。
A navigation system model by using a finite state machine is described.
本文建立了拖拉机转向系的力学模型，推导出系统的频率特性。
This paper gives the dynamic model of the tractor steering system and deduces the frequency response function of the system.
提出了一个基于集总参数法的车用内燃机冷却系统动态传热模型。
A dynamic heat transfer model based on the lumped parameter method was developed for cooling system of vehicle internal combustion engine.
应用推荐