锁集贴在支持管和第二支架基础。
A lock assembly is affixed to the support tube and the base of the second bracket.
在钢管混凝土系杆拱桥系梁支架搭设施工中，支架基础的承载能力和支架自身的稳定性是工程的关键。
The foundation's bearing capability under the bearing bracket and the stability of the bearing bracket are the key points in the construction of the under supporting steel pipe concrete arch bridge.
这个测试支架消除了对网络和基础设施的需求，从而将此测试用例只限制在这个应用程序本身。
The testing scaffolding removes requirements for networking and infrastructure, isolating the test cases to the application itself.
心脏病学家必须在以小没有长期随访并且报告的结果有矛盾的的随机试验的基础上，决定心脏病发作的患者用哪种类型的支架。
Cardiologists have had to decide which type of stent to use in heart attack patients based on small randomized trials that didn't include long-term follow-up and reported conflicting results.
电机与泵的联接有两种方式，一是电机装在与泵体连为一体的支架上，二是电机单独设基础通过加长轴与泵轴联接。
Motor and pump connection in two ways, one motor and pump mounted on the bracket as a single entity, the second is the basis set by adding a separate motor axis connected with the shaft.
最后，本文对索道支架与基础结构的进一步分析工作提出了建议。
Finally, this paper offer some suggestion to the later analyzing work of passenger ropeway bracket and foundation structure.
在此基础上，改进了支架接榫结构。
评价脱细胞脊髓支架的免疫原性，为其在组织工程中的应用奠定理论基础。
To investigate the immunogenicity of the acellular spinal cord scaffold and to provide theoretical basis for its further application in tissue engineering.
同时，介绍了多体系统动力学软件ADAMS的基础理论和方法，研究了建立液压支架虚拟样机模型的关键技术问题。
At the same time, the method and basic theory of dynamics software ADAMS are introduced. The project studies the key technical problem of establishing hydraulic support virtual prototype model.
这些支架材料为人工神经的构建提供了丰富的原料，为应用组织工程化人工神经修复受损的周围神经奠定了基础。
These materials provided abundant staple for the fabrication of artificial nerve and made basis for using tissue engineering based artificial nerve to repair injured peripheral nerves.
以深度精制的石蜡基馏分油为基础油，添加具有改善油品性能的添加剂研制了液压支架安全阀校阀油。
A calibration valve oil for hydraulic shield safety valves was formulated by a base oilobtalned from the distillate of a deep-refining paraffinic crude with qualified additives.
特别适用来制造机床底座、床身、支架等基础件件。
PC especially can be used in manufacturing the foundation , bed supporting bracket .
介绍了某工程采用门式模板支架的设计要点，在一些特殊节点所采取的构造措施，基础处理和荷载试验，以及施工所取得的效果。
Author introduces the design key points, construction measures at some special joints, basement disposal, load tests, and construction effect of a gate scaffolding applied in a project.
在对电机转子和滑轨支架进行运动学分析的基础上，给出了电机转子的单刚体运动学模型和带有滑轨支架的刚体系运动学模型。
On the basis of kinematic analysis of rotor and gimbal guideway, the rigid body kinematic models of single rotor and rotor with the gimbal guideway were derived.
在分析回采工作面支架底座作用在底板岩层上压力分布特征的基础上，选择正方体试件用钢质小圆柱加压实验的方法测定高水速凝材料容许比压。
Based on the analysis of distribution of pressure applied by hydraulic support base on seam floor, a method to test the allowable specific pressure of high water content material was suggested.
第三，在全向反射面的设计基础上，设计了外部参数可调的支架系统。
Third, on the design of omni-directional reflector, we designed the stent system by controlling an external parameter.
文章论述了支架式教学模式的理论基础，以及在VB实验教学中实施的方法。
This paper mainly described the theoretic basement of scaffolding instruction and implementation method in VB teaching of experiment of non-computer profession.
由该简化计算模型推导的公式可作为锚拉支架支护机理分析的基础和参数设计的计算方法。
The equations of the model is able to be the foundation of the mechanism analysis of truss support and the calculation method of parameters selected for a truss.
在引入三维设计和有限元分析软件的基础上，以液压支架立柱为对象，对其进行参数化设计和校核。
Based on applying the 3d design software and finite element analysis software, with hydraulic support for the studying object, parametric design and check were carried out on it.
并在这基础上，把骨髓基质干细胞与生物支架材料复合培养，在体外构建工程软骨和软骨下骨修复体。
Then, on this basis, the bone marrow stromal cells were cultured with the scaffold biomaterials, and the engineering cartilage and subchondral bone restorations were constructed in vitro.
在此基础上采用飞秒激光双光子微细加工技术制备了典型的微生物器件——微井阵列、微柱阵列和光子晶体生物微型支架。
Using two-photon femtosecond laser micro-processing technology fabricates a typical microbial devices such as micro-well array, micro-pole-array, and photonic crystal micro-biological scaffold.
论文的研究工作包括两部分：外耳支架的快速成形制造研究和改善外耳支架的生物相容性的基础研究。
The study includes two parts: research on rapid prototyping of auricle scaffold and fundamental research on improving biocompatibility of auricle scaffold.
并在此基础上结合传统的工艺，设计了聚氨酯—胶原复合外耳支架，改善其生物相容性。
On this basis, a polyurethane-collagen composite auricle framework was designed to improve its biocompatibility by combined with traditional method.
本课题在分析了几种简易轻便自移支架的基础上，提出了一种新型支架的架型——悬移顶梁组合支架。
A new type of the combined hydraulic support of suspension roof timber is designed based on the analysis of simple supports and fully mechanized mining supporter.
通过优化设计，在应力和位移有所下降的基础上，使得动力头支架重量减轻6%。
After optimized, the weight of the frame reduced 6%, and the stress and displacement also descended.
通过优化设计，在应力和位移有所下降的基础上，使得动力头支架重量减轻6%。
After optimized, the weight of the frame reduced 6%, and the stress and displacement also descended.
应用推荐