对于有时间窗的非满载VSP问题，将货运量约束和软时间窗约束转化为目标约束，建立了非满载VSP模型，设计了基于自然数编码，使用最大保留交叉、改进的反转变异等技术的遗传算法。
On the VSP with time window, while the restraints of capacity and time windows are changed into object restraints, a mathematic model is established.
采用支持向量回归在线辨识算法作为建模方法建立被控对象的逆模型。
Online identification algorithm of support vector regression is used to build the inverse model for the plant.
在此模型基础上，结合故障信息矩阵建立了一种配电网故障区间判断的新型矩阵算法。
Combined with faults information matrix, a new matrix algorithm for fault section detection in distribution system is then built based on this model.
本构模型的建立和积分算法的选择是umat子程序开发中的核心问题。
Establishing a constitutive model and choosing an integral algorithmic method are the crucial matters for developing UMAT subroutine.
为了建立基于光谱的实时监测模型，本文给出了一种基于移动窗口策略的的偏最小二乘算法。
In order to establish real - time model of spectral measurement, a algorithm called Moving Windows Partial Least Squares algorithm is proposed.
采用了属性构造法进行数据预处理，建立了数据挖掘模型，实现了关联规则算法，并对挖掘结果进行解释与分析。
A model of data mining is set up after preparation of data by means of attribute structure, and association rule algorithms are carried out. the data mining result is explained and analysed.
在对整个电力系统进行故障诊断研究时，故障诊断算法的鲁棒性差且有些诊断对象不易于建立实际系统数学模型。
Upon the research on the whole electric power system, the robustness of fault diagnosis algorism is bad and it is hard to build practical math models for some objects.
通过建立斜拉桥优化模型，运用结构分析方法，结合优化算法计算实例，对大跨度斜拉桥的动力优化设计进行了初步的探讨和研究。
Through building optimum model of truss Bridges, utilizing structural analysis methods and combining examples of optimum algorithms, the dynamic design of wide span truss Bridges is discussed.
建立了基于有限元方法并结合一种弧长算法的适用于UPC梁非线性全过程分析的数值模型。
A numerical model based on the finite element method incorporating an arc-length algorithm for nonlinear full-range analysis of UPC beams was developed.
这些算法模型具有很强的实用性，能为建立高效和功能强大的计算机评估系统提供参考。
These algorithms should have stronger practicability and give references when we are building effective and powerful computer evaluation system.
分析了通道不一致对算法性能的影响，建立了宽带信号模型的通道误差模型；
The channel uncertainty of wideband signals is modeled and its affection on the performance of DOA estimation is analyzed.
利用粒子群的优化算法，建立侵彻子母弹最佳抛撒高度的求解模型，并进行了仿真计算。
By using Particle Swarm Optimization (PSO), a model was built up for calculating the optimum dispersion height of intrusive submunition dispenser, and mathematical simulation was carried out.
推导出了刀位轨迹算法和切削行距算法，建立了面向新型并联机床的CAM系统框架模型。
Algorithms for tool path calculation and cutter path interval calculation are derived. Frame model for CAM system of PMTs is established.
在建立回波抵消器模型的基础上，按最小均方误差准则，导出了自适应滤波器抽头的统计梯度算法和抽头调节的收敛公式。
Based on building up a model of echo canceller, the convergence of gradient-type stochastic adjustment algorithm of an adaptive filter under the mean-squared error criterion is discussed.
数学模型的建立和算法的实现。
The establishment of mathematics models and algorithm realization.
本文在比较各种分类算法的基础上，提出了应用CBR模型建立心电图自动诊断系统的构想，并阐述了CBR模型中心电图实例库设计的若干关键问题。
After comparing all kinds of classification methods, this paper shows a new kind of ECG automatic diagnostic system based on the CBR model and some key points on ECG database design in the CBR model.
本文首次提出了带模糊约束的最小费用流问题，建立了相应的数学模型并给出了求解这一模型的有关算法。
In this paper, the minimum cost flow problem with fuzzy constraint is proposed for the first time, and the corresponding mathematical model is constructed.
利用距离幂反比法加分形插值算法建立了地形模型。
Established the landform model by distance power inverse ratio method and fractal interpolation algorithm.
本文提出了一种自动模型及其系统结构的有效实现，并用算法自动建立了在噪声数据上的异常检测模型。
An automatic model and its system architecture are presented, and an algorithm that automatically builds abnormally detecting models on noisy data is realized.
对于相似模块的选择，论文建立了基于模糊相似优先比的模块选择算法模型，并给出了实际例子的演算过程，验证了算法的可靠性。
Furthermore, an algorithm of module selection which is based on fuzzy theory is brought forward in this dissertation, and the reliability is validated by an example.
建立了多相流模型与算法，给出了云雾区的速度场与燃料浓度分布。
The multiphase flow model and algorithm was setup. The velocity fields and distribution of fuel concentration are given.
文章针对基于JIT思想建立的一种批量计划和作业排序集成问题，建立整体模型，设计了一种启发式算法采用集成方法求求解。
A monolithic model of the lot-sizing and scheduling problem based on the JIT strategy has been proposed in this paper, and a heuristic algorithm using integrated method has been designed to solve it.
在辨识被控对象的脉冲响应模型时，现有算法是建立在其脉冲响应序列长度不变的基础上。
Present algorithm treats the length of impulse response sequence constant when identifying the model of object.
我们详细阐述了蜂窝网络无线定位原理以及相关的无线定位基本方法，建立了定位算法的数学模型。
We give the theory and methods of cellular wireless location, and build the mathematical model of location.
本文提出基于新的激励函数BP算法建立误差预测模型，修正新型广义预测算法的预测输出。
In the paper presents the predictive out of a new generalized predictive Control is corrected by the error predictive model based on a new excite function BP arithmetic.
在此基础上，对传统的串并联法和平行路法进行改进，建立算法模型。
On this basis, the traditional method of series-parallel and parallel road are improved, by establishing algorithm model.
利用动态学习率改进BP算法，建立了混合神经网络模型。
A mixed NN model is constructed using BP algorithm improved with dynamic learning rate.
将改进的支持向量回归机与B -样条网络相结合，提出了一种建立回归曲线模型的新算法。
A new algorithm for modeling regression curve is put forward in the paper, it combines B-spline network with improved support vector regression.
针对所建立的误差模型，分析数据规范化算法在基础矩阵估计中的应用。
On the basis of the error model, the paper also analyzes the application of data normalization algorithm to estimating fundamental matrix.
针对所建立的误差模型，分析数据规范化算法在基础矩阵估计中的应用。
On the basis of the error model, the paper also analyzes the application of data normalization algorithm to estimating fundamental matrix.
应用推荐