可配合金刚石磨片、陶瓷橡胶磨片、砂纸片等应用于粗加工。
Diamond disk and disk rubber disk sandpaper, to adapt to the rough finish.
本文结合金刚村硐室大爆破工程实践，设计了导硐的封堵药包方法。
In light of the practice of chamber blasting in Jingang village, a method of stemming charge in leading chamber is described in this paper.
钼是一种宝贵的稀有高熔点金属，是生产合金刚、不锈钢、耐热钢和合金铸铁的重要合金化元素。
Molybdenum is the rare metal with high melting point, which is often used to prepare alloy steel, refractory steel and stainless steel.
然而，一项古代科技成了新的威胁，这股力量能够将多名变形金刚组合为一个身形巨大的、更具威胁力的形态——组合金刚。
However, an ancient technology has enabled a new threat, the power for multiple Transformers to combine into one massive, dangerous form: Combiners.
在微波等离子体化学气相沉积装置中，研究了负偏压形核对金刚石薄膜与WC 6 %硬质合金刀具附着力的影响。
The influence of bias enhanced nucleation(BEN) to the adhesion between diamond coating and WC-6%Co carbide cutting tool is researched with the microwave plasma (CVD) instrument.
黄铜粉：分10、20、30黄铜粉，可添加稀土等微量合金元素，分为用于含油轴承及金刚石制品两类。
Brass powder: three kinds of powder, type10, type20 and type30, can been offered. Rare earth element and other trace amount of alloy element can been added.
同时，本公司也生产各种组合锯套装，各种特殊合金锯片，以及各种金刚石锯片。
Also we produce dado bado blades set and all kinds of diamond circular saw blades.
采用真空气相沉积法在金刚石表面镀覆强碳化物金属或合金薄膜。
Using vacuum gas phase deposition, diamond surface is coated with strong carbide metal or alloy membrane.
金刚石薄膜的一个重要用途是用做加工非金属、非铁金属和合金的刀具涂层。
One of the important applications of diamond coatings is as cutting tools for nonmetals, nonferrous metals and alloys.
实验表明，渗覆金属处理可以使粘结合金或金属对金刚石的粘结力大大增强。
Experimental results showed that the bonding strength of metal-coated diamonds with alloy or metals was improved markedly.
研究了添加金刚石对镍基合金的强化与磨损性能的影响。
The effects of addition of diamond on reinforcement and wear resistance of nickel base alloy was studied.
文中通过用金刚石薄膜涂层刀具对含硅量不同的硅铝合金进行干切削试验，探讨其切削性能。
In this paper, the dry-cutting tests were carried out by diamond film coated tool on Si-Al alloy and this tool's cutting properties were studied.
金刚石薄膜涂层硬质合金刀具是CVD金刚石薄膜的重要应用领域之一。
The cemented carbide tool coated with diamond film is one of the important application of CVD diamond film.
通过用金刚石薄膜涂层刀具对含硅量不同的硅铝合金进行干切削试验，探讨其切削性能。
Using diamond film coated tool, the dry-cutting tests are carried out on Si-Al alloy with different Si-contained. The cutting properties are studied.
讨论了预合金胎体粉末的优点，研究了预合金胎体粉末的制备技术，列举了预合金胎体金刚石钻头的应用效果。
This paper discussed the advantages about pre alloy power, and studied the technology for making pre alloy power. The performances of pre alloy power diamond bits were given.
本文针对硬质合金刀具切削中硅铝合金活塞槽存在的问题，研制出一种新型人造金刚石切槽刀。
For the problems that exist in cutting medium silicon aluminium alloy piston grooves with carbide tools, this paper presents a new kind of artificial diamond grooving tool.
展望了纳米级硬质合金和纳米级胎体金刚石复合材料在钻探中的应用前景。
The application of nano-crystalline WC-Co powder and nano-crystalline diamond composite material to the drilling is forecasted.
金刚石薄膜与硬质合金基体间的附着力较低一直制约着金刚石薄膜涂层工具的商业化生产和大规模应用。
The commercial production and applications of diamond coating tools a re always restricted by the poor adhesion power between diamond coatings and cemented carbide substrates.
硬质合金是一种广泛使用的工具材料，在其表面沉积高附着力的金刚石薄膜时存在着困难。
Cemented carbide is a widely used material for cutting tools, but depositing diamond film onto the surface of the cemented carbide with strong adhesion is very difficult.
提高金刚石薄膜与硬质合金基底之间的附着力是CVD金刚石薄膜刀具得以推广应用的关键因素。
To extend the applications of CVD diamond coated tools, the improvement of adhesion between the diamond film and cemented carbide substrate is a key factor.
探讨了用液相电解沉积法在钛合金表面制备类金刚石薄膜的新方法。讨论了不同沉积条件对膜的影响。
In this paper, Influence of deposition condition on diamond-like carbon(DLC) fil ms byliquid deposition onthe surface of Ti alloy was discussed.
采用高功率横流CO2激光扫描钎料合金与金刚石颗粒。
High power transverse flow CO2 laser was used to scan the brazing alloy and diamond grits.
结果表明，真空渗硼预处理不仅可以有效的消除或控制钴在金刚石沉积时的不利影响，而且，还显著粗化硬质合金基体表面。
The results showed that the vacuum boronizing pretreatment method effectively reduced the diffusion and mobility of Co in the substrates and obviously roughened the surface of the cemented carbide.
建立了人造金刚石BE LT合成装置硬质合金顶锤的有限元分析模型。
The finite element analytical model was established for carbide anvil of artificial diamond BELT synthetic device.
用高分辨电子显微镜观察到了催化剂合金中再结晶石墨形貌随温度、压力的变化，找到了金刚石晶体形成的证据。
We have observed the change of recrystallized graphite morphology using a high-resolution electron microscope, and have found evidence of the diamond crystal-formation.
为了提高钻头的寿命，提出了将制作金刚石增强型硬质合金复合齿的工艺、配方应用到制作孕镶金刚石钻头的设计思路。
In order to improve bit life span this paper puts forward a thought of using the techniques and formulas of making diamond enhanced tungsten carbide composite button to make impregnated diamond bit.
利用真空蒸镀使金刚石表面敷镀铬、钛或铬钛合金。
The surface of diamond was plated with Cr, ti, or Cr-Ti alloy by vacuum evaporation.
利用真空蒸镀使金刚石表面敷镀铬、钛或铬钛合金。
The surface of diamond was plated with Cr, ti, or Cr-Ti alloy by vacuum evaporation.
应用推荐