在纤维的各端，必须将光信号转换成电信号或者将电信号转换成光信号，计算机用电信号处理信息。
At each end of the fibre, optical signals must be converted to or from the electrical signals that computers use to process information.
光电倍增管将光信号转换成电信号，经微电流放大纪录下来。
The photomultiplier tube converts the optical signal into an electrical signal which is recorded by the micro current amplification.
一种无需将光信号转换为电信号的联网设计可能大幅提升容量，同时降低功耗。
A new network design that avoids the need to convert optical signals into electrical ones could boost capacity while reducing power consumption.
光电滑觉传感器是利用光电效应原理，将机械的滑动通过光信号转换为电信号加以检测。
On the basis of photoelectric effect, photoelectric slippage sensor converts the mechanical slippage into electric signal through optical signal in order to detect.
就其本身来说，IBM已经使用硅来研发一种超薄快速型光电探测器来讲光信号转换成电信号。
For its part, IBM has used silicon to develop a fast and extremely thin photodetector to convert optical signals into electrical ones.
但在纤维的各端，必须将光信号转换成电信号或者将电信号转换成光信号，计算机用电信号处理信息。
But at each end of the fibre, optical signals must be converted to and from the electrical signals that computers use to process information.
各种视觉假体刺激的部位不同，但是基本功能是相同的，都需要将外界的光信号转换为可用的电流脉冲，通过微电极阵列刺激相关部位产生光幻视。
All visual prostheses have the same function: converting outside optical signal to certain current pulses and stimulating the relevant parts by the micro-electrode array to generated phosphenes.
具体来说，无论是螳螂虾还是DVD或CD播放机都可以将光转换成不同的形式，从而将光信号存储起来，之后还能再调取出来。
Specifically, both mantis shrimps and DVD or CD players are able to convert light into different forms so it can be stored and then retrieved.
具体而言，螳螂虾和DVD机或CD机都能将光转换成不同的形式，从而将光信号存储起来，之后还能再调取出来。
Specifically, both mantis shrimps and DVD or CD players are able to convert light into different forms so it can be stored and then retreived.
英特尔不需要发明任何新东西，它只要想办法使电子信号和光信号之间的相互转换更小巧便宜。
Intel did not have to invent anything new, but it did have to work out how to make small, cheap versions of the converters that turn electrical signals into light and vice versa.
使用该模型分析了增益钳制特性和转换后信号的消光比。
This model was used to analyze gain-clamping characteristic and the extinction ratio of wavelength-converted signal.
光扭矩传感器的输出信号在进行光电转换过程中，由于温度影响，造成了直流电平漂移误差，影响系统的测量精度。
During the photoelectric conversion process of output signal from optical torque sensor, DC level drift error induced by temperature influence will affect the measuring accuracy of the system.
高转换效率的信号光输出取决于抽运光和初始信号光的强度及晶体长度的最佳优化值。
The signal power output of high conversion efficiency is depended on the optimum crystal lengths, pump intensity and signal power.
对基于半导体光放大器中交叉增益调制效应的波长转换后信号的啁啾特性进行了分析。
The chirp performance of converted signal in wavelength conversion based on cross gain modulation (XGM) in semiconductor optical amplifier (SOA) was analyzed.
这些细胞是在那里看到启动，因为它们转换成光信号给大脑。
These cells are where seeing starts, as they convert light into signals to the brain.
码型转换是实现非归零(NRZ)信号全光时钟恢复的关键技术。
Pattern conversion is the key technology for all-optical clock recovery from non-return-to-zero (NRZ) signal.
再说明其相关的光信号处理和光波长转换技术。
It also describes the related optical singal processing and optical wavelength changer technology.
通过透镜、二向分光镜、窄带滤光片、光电转换器件实现了两路光信号的传输采集和转换。
Two-way light signals were transmitted, collected and converted by using lens, beam splitters, narrowband filters and photo-detectors.
分析了泵浦光的谱宽以及测量所选用的滤波器的带宽对下转换产生的信号光和闲置光分布范围影响。
We theoretically analyzed the effect of both pump and detection bandwidth to the distribution range of photon pairs generated by SPDC process.
从而研究了待转换的信号光及偏置电流对转换光功率和消光比的影响。
As a result, the influence of signal light and bias current to the power and extinction ratio of converted light is studied in detail.
每一个光点都是由摄像管转换成电子信号。
Each dot of light is translated by the camera tube into all electronic signal.
光发射机的功能是将电脉冲信号转换成光脉冲信号，并以数字光纤通信系统传输性能所要求的光脉冲信号波形从光源器件的尾纤发射出去。
Transmitter is the device which changes electrical pulse signal into optical pulse signal, and then transmit the optical signal in wave form by laser diode or light-emitting diode.
每一个光点都由摄像管转换成电子信号。
Each dot of light is translated by the camera tube into all electronic signal.
研究发现，较大的激光器注入电流可以有效地抑制频率啁啾，较高的注入信号光功率则可以在保证高转换信号消光比的同时抑制频率啁啾。
The results show that higher injected current can restrain the frequency chirp effectively, and higher input optical power can also do that, meanwhile, good extinction ratio is ensured.
在接收部分，本设计采用高速率的PIN光电二极管完成光信号的接收，并将接收到的光功率转换为电信号。
In this design, a high speed PIN photodiode is used in the receive part to receive the optical signal and convent it to the electrical signal.
降噪是首次应用于的全画幅传感器光转换为电信号。
Noise reduction is first applied as the full-frame sensor converts light to electronic signals.
第二部分是光纤传输和光电转换器，从传感头输出的频率调制信号驱动装在高压端的发光二极管，进而转换成光脉冲信号；
The first one is a sensor head converting the current flowing in the power line into the optical pulse FM signal. The second one is optical fiber transmission and optolectric conversion.
光探测及放大电路实现信号的光电转换并放大、滤波，得到清晰的电压信号。
Optic detecting and amplifying circuit makes the optoelectronic signals exchange, amplify, filter and get the voltage signals.
光探测及放大电路实现信号的光电转换并放大、滤波，得到清晰的电压信号。
Optic detecting and amplifying circuit makes the optoelectronic signals exchange, amplify, filter and get the voltage signals.
应用推荐