SOPC片上可编程系统和嵌入式系统是当前电子设计领域中最热门的概念。
SOPC (system on a Programmable Chip) and embedded system is the most popular conception in the electronic design field.
分析了可编程序控制器系统控制软件及其特点，并对一些编程中的要点及注意事项作出了经验上的总结。
Analyzed PLC system control software and it's characteristics, and make experience summarize to programming main point and notice proceeding.
可编程片上系统(SOPC)是近期嵌入式系统设计的热点之一，利用成熟的处理器软核是进入这一领域的捷径。
SOPC design is one of hotspots in embedded system fields. Using a mature MCU soft core is a crosscut to enter this field.
提出基于可编程片上系统(SOPC)的嵌入式系统设计流程及其所涉及的主要设计问题。
It puts forward the design flow and design issue of embedded systems based on system-on-a-programmable chip (SOPC).
可编程片上系统的设计是一个崭新的富有生机的嵌入式系统设计研究方向。
The design of system on programmable chip is a new and vital aspect for the research of embedded system designing.
该系统在可编程PID整定的基础上，提供了速度、加速度前馈滤波，以保证系统的静态精度和动态性能。
On the basis of the programmable PID tuning, a filter of speed and acceleration feedforward is provided to insure the static accuracy and dynamic performance of the system.
本文介绍了可编程序控制器PLC在矿热电炉功率自动调节系统上的应用。
The paper introduces the application of programmable controller PLC in power automatic regulation system of electric ore - smelting furnaces.
基于FPGA的可编程片上系统（SOPC）在设计上的灵活性和运算高速性的特点，有利于实现整个系统。
The SOPC technology based on FPGA, which has the advantage of flexibility and high speed, is favorable for realizing the entire system.
介绍了基于可编程片上系统的超声检测分析系统。
A new ultrasonic detecting system based on SOPC is introduced.
提出了一种基于可编程片上系统(SOPC)技术的无人机飞行控制系统硬件解决方案。
This paper introduces a solution to satisfy the need of the hardware platform for the UAVs based on the System on a Programmable Chip (SOPC) technology.
本文对变压吸附氮气发生器的自动控制系统进行设计，通过可编程控制器（PLC）来控制多个阀门以实现工业生产上对氮气的连续，大量需求。
This article carries on the design to the nitrogen generator automatic control system by PSA, it controls valves by PLC to realize in the industrial production have continuous, gen…
在系统设计上采用了CPLD大规模可编程逻辑器件，整机功耗小、抗干扰能力强、系统稳定、工作可靠、升级方便。
In the system design using large-scale programmable logic device CPLD, the whole power consumption, anti-jamming capability, system is stable, reliable, easy to upgrade.
介绍了一种基于可编程片上系统（PSOC）的宽量程电能计量模块（EPSOC）的结构与原理，分析了自调增益算法及同步采样算法。
Structure and theory of wide magnitude electrical energy measurement module based on PSOC (EPSOC) are introduced in this paper, adjustable range algorithm and synchronous sampling are analyzed.
本文旨在对脉冲激光测距系统进行一套全数字集成化方案设计，将激光接收与信号处理单元部分集成到一片现场可编程门阵列芯片上。
This paper aims to design a full digital integration project of laser range finder, and tries to integrate signal processing unit into a FPGA chip.
可编程片上系统设计技术，目前是一个热点话题，技术含量高，起点也高，所以本文能对大伙儿有帮助。
On the programmable piece the system design technology, at present is a hot spot topic, the technical content high, the beginning is also high, therefore this article can have the help to everybody.
在此基础上，采用高速数字信号处理器、大规模可编程逻辑门阵列和实时软件进行系统设计，完成了原理样机的研制。
On this basis, the principle prototype is developed with high speed digital signal processor (DSP), the huge reprogrammable logic gate arrays (FPGA) and real-time software.
采用功能强大的EDA软件，结合在系统可编程技术(isp)，可以在不从电路板上拆下芯片的情况下，应用ISP技术，改变芯片的逻辑内容。
Adopting ISP and EDA technique may not only integrating circuit but also changing the logic content of the chip without dismantling it from the circuit board.
在此基础上，采用高速数字信号处理器（DSP）、大规模现场可编程门阵列（FPGA）和实时软件进行系统设计，完成了原理样机的研制。
On this basis, a prototype is developed with a high speed digital signal processor (DSP), huge field-programmable gate arrays (FPGAs) and real-time software.
介绍了总线控制器pci9054的桥式作用、用可编程逻辑器件模拟LOCAL总线侧cpu的设计、EEPROM的配置以及总线的数据传输操作过程，然后在此基础上给出了数据采集系统的设计。
It includes that the bus controller PCI9054 action, the simulation of the CPU design with CPLD on the LOCAL bus side, configuration of EEPROM and the bus operation of the data transmission.
在现场可编程门阵列工艺中最终实现了飞轮的片上伺服系统；
This system-on-chip of flywheel controller was implemented on an FPGA platform.
小型可编程控制器的控制功能及其在涂布机刮刀涂布器控制上的应用，讨论了该控制系统的软硬件组成及程序设计。
PLC and application to the Blade-coating machine. We discussed the software, hardware and program design of the control system.
小型可编程控制器的控制功能及其在涂布机刮刀涂布器控制上的应用，讨论了该控制系统的软硬件组成及程序设计。
PLC and application to the Blade-coating machine. We discussed the software, hardware and program design of the control system.
应用推荐