再现了研究区的三种变形破坏模式；
Following, the deformation failure mechanism of three instability patterns is particularly analyzed.
引入了三种变形约束规则：位置约束、形状约束和重复性约束。
The paper puts forward three deformation restriction rules: position restriction, shape restriction and repeating restriction.
水力劈裂过程只有弹性变形和脆性破坏，不存在裂隙压裂过程中的第三种变形机理—压缩破坏。
There are only elastic deformation and brittle deformation on the process of hydraulic fracturing, and not compaction.
因此必有某种事物是一开始就存在的，也就是人们理解意义上的上帝。阿奎那前三种论证方法通常被称为一种更通用的论证的变形——宇宙论论证。
The first, second and third Ways of Aquinas’ arguments are often called variations of a more general argument, the Cosmological Argument.
分别采用六种载荷边界条件和三种位移边界条件对曲轴应力和变形进行了有限元分析；
The stress and deformation of crankshaft are calculated by finite element method with six load boundary conditions and three displacement boundary conditions.
第三种情况是因为传动轴变形不平衡引起，一般这种情况出现在底盘碰撞过的车比较多。
The third case is due to the deformation of the transmission shaft caused by the imbalance, the general situation in the chassis collision over the car.
本文在外载相同、艇体结构质量相等的条件下，对三种不同结构形式的艇体进行了应力与变形分析。
In this paper, the stress and deformation of three different structuring forms of ship hull are analyzed under the conditions of the same external load and the equal mass structure.
震区的地表地震变形主要表现为地震破裂、滑坡和地震断层三种形式。
The Surficial deformation caused by the earthquake is mainly expressed as earthquake fractures, landslides and earthquake faulting.
确定岩体变形和强度参数最常用的方法有三种：原位试验法、经验关系法及数值分析法。
There are three kinds of methods to confirm the rock deformation and intensity parameters:in situ test, experiential relation method and numerical analysis method.
与之相对应，观察并分析了PLC效应空域上三种类型plc变形带的空间传播特性。
Correspondingly, the spatial propagating characteristics of the three types of PLC deformation bands are observed and analyzed.
本文用非线性有限元法计算了三种不同的四边支承板的大变形响应。
Using nonlinear finite element method, the large deformation responses were computed for three plates supported on four edges in different ways.
结果表明，三种模拟结果中奇偶铣削加工得到的结构件的变形最小。
The experimental results show that distortion of the monolithic component from odd-even of the three different sequences is the smallest.
分析结果表明，三种支撑方法能够满足轻质镜的变形精度要求。
The analysis results show that the requirements for the deformation accuracy of the lightweight mirror can be fulfilled with three support methods.
采用时间控制、变形量控制和功率峰值控制三种控制方式实现了焊接过程的自动控制。
Three control modes have been worked out, such as time-control, deformation-control and power-peak control. Each model realizes automatic control in linear friction welding.
最后对三种结构型式的拱顶储罐的变形方式、应力状态、塑性变形历史、塑性极限压力、弹性失稳临界压力进行了分析与对比。
The analysis and contrast of deformation pattern, state of stress, plastic deformation history, plastic limit load and limit load of elastic buckling are analyzed and contrasted.
本文分析了这三种剪切变形的形成原因，提出了测算这些剪切变形和计算多余度系数的方法。
This paper has analysed the formation of these three kinds of shearing strain and presented the methods of determining shearing strains calculating redundant extent factor.
在对三种岩石结构面进行直接剪切试验的基础上，探讨了结构面的变形特性和表面粗糙度的效应。
Direct shear tests were conducted with three kinds of rock joints that contained in limestone from a underground mine, deformation behavior and roughness effect of the joints are discussed.
实例计算了在三种拉坯速度下凝壳热变形和鼓肚变形。
Then the practical example is given to calculate the thermal deformation and the bulging deformation of the solidified shell under three tension speeds.
本文通过三种尾矿砂的三轴剪力试验对尾矿砂在高压力下的变形与强度特性进行了研究。
In this paper, the strength and deformation characteristics of tailing under high pressure were studied with triaxial tests on three kinds of tailing.
正应力图形和剪应力图形可以分为三种类型，分别对应压缩类变形、平面应变以及拉伸类变形。
The figures can be divided into three main types, which refer to compression, plain strain, and tension, respectively.
同时，给出了三种几何纠正方法来纠正数字化和图纸变形产生的误差。
And three geometric correcting methods are provided for correcting the error originated from the digitizing and the map paper's distortion too.
受雨淞为害的毛竹出现折裂、倒伏和弯曲变形三种情况。
Phyllostachys pubescens harmed by glazed frost shows breaking, lodging and winding.
本文通过三种不同钢纤维掺量的钢纤维混凝土早期水化热温度和变形实测，得到了不同掺量钢纤维混凝土的水化热温度及温度变形的时程线。
In this paper, three mixed steel-fiber concrete and ordinary concrete specimen were tested for revealing their early thermal behavior and strain caused by hydrated heat.
模拟在相同温度和荷载条件下，三种不同级配的变形响应，模拟结果真实反映了不同试样的变形响应，与实际试验结果一致。
The purpose of simulation is to reflect different deformation response of three different gradations. The simulation results truly reflected actual experimental results.
结论：结果提示三种动物红细胞变形能力基本相似，但涉及多种细胞外因素的红细胞聚集性则存在明显差异。
Conclusion: the erythrocyte deformability is nearly the same among 3 species of animals, but the erythrocyte aggregation involving many extracellular factors appears a noticeable difference.
而三种工艺参数的焊后变形最大值均位于大接管左侧的焊缝处，沿左侧焊缝向容器底部方向变形逐渐减小，在接近容器底部变形又开始增大。
The MAX deformation lie to left side of big pipe, and the deformation get smaller removed from left side to container bottom, as close to the bottom, the deformation began to harder.
高孔隙岩石的三种局部化变形方式：压缩带、剪切带和膨胀带是常见的三种在野外已经找到证据的变形方式。
Recently, localized planar zones of deformation have been discovered in high-porosity rock, which are called compaction bands, shear bands and dilation bands.
广义静定问题解由角点集中力解、体力分量解和计算边值条件解组成，这三种解要满足不同的变形协调条件，必须分别计算。
For the determinate problem, the final solution is composed of the corner concentrated force solution, the body force solution and the computed boundary-value condition solution.
广义静定问题解由角点集中力解、体力分量解和计算边值条件解组成，这三种解要满足不同的变形协调条件，必须分别计算。
For the determinate problem, the final solution is composed of the corner concentrated force solution, the body force solution and the computed boundary-value condition solution.
应用推荐